politics does not create the new partition

Similar Questions

• Satellite A100-906: Express Media Player does not create the c partition

  I recently bought the Satellite A100-906 model and I would like to make a partition to save the data, but the already existing partition with the reader of the Express does not allow part C: partitioning.

  If I delete the partition Express I'll be able to install it after I divide the part C: or I have to choose between separation and the Media Player?

  In my opinion it should work, but you must create the Express Media Player partition with the same size as the old.

  PS: Do you know the Partitions Magic 8? This software allows you to create partitions while Windows is running. It's a great tool

• the call firefox.exe - ProfileManager does NOT open the Profile Manager does NOT create a new profile, KILLS the old session tabs, but all pinned!

  FF 7.0.1 on Win7 pro 64

  A behavior more bug / odd:
  calling "firefox.exe - ProfileManager".
  -do NOT open the Profile Manager,
  -does NOT create a new profile,
  -seems to do NOTHING (no change around records profile etc.).
  but...
  -KILLS tabs former session.
  -KILLS old session and leaves nothing to restore,
  -KILL all my pinned tabs!

  OK, I should downgrade to FF4.0.1, or same 3.6.x?
  These releases are much more reliable than 6 + 7 running!

  Try using this:
  
  Firefox.exe Pei

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

  Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

  "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

  What I'm doing wrong here?

  The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

  Thanks in advance for any ideas.

  After you disable the internal SD card slot, the installation ends without incident.

• Setup could not create a new partition system

  Ok.  I just built a new rig.  ASUS P55 intel chipset mobo.  I have two WD Caviar Black hard drives and a RAID-1 array.

  I installed my OEM WIN-7-64 operating system several times.  Mostly because my WUSB54GC Linksys adapter wireless crashes my OS WIN because of a compatibility problem.

  Long story short: the last time my OS crashed he would not be stopped, kept grinding and grinding so I stopped it "hard."  Then when I tried to restart it kept a black window stall without launching.  So I decided to start over with a clean install.

  Big mistake!

  When I got to the place where you want to install? I had onlyl only one possibility, I created a RAID-1 array with 1 TB WD caviar drives two of the screen.  Then, I started to FORMAT it the disc for the drive I want to install WIN 7-64 on.  That was the big mistake.  Previously, I was able to install WIN 7 several times, but after formatting the HARD drive, I received the message "Setup could not create a new partition system.  I can't find the logs and I tried all of the suggestions that I have found here and does not.

  I have an ASUS P55-Deluxe mobo with two 1 to WD Caviar black HDs in a matrix RAID-1.

  I tried to reinstall WIN 7, with the HDD BIOS on IDE.  It worked once in what concerns the installation of the OS, but whenever I try to recreate the RAID array, I get the bloody message "Setup could not create a new partition system!

  I tried using partition of drive on BACK in but nothing works.

  Of course, here, someone has the same problem and has a solution.

  Help, please!

  Hi Steve,.

  On another forum, I read to remove the battery from the motherboard and wait 10 minutes before turning.  Not only did it clears the CMOS memory, but "remains".  After that, I was able to partition my RAID-1 disk, format the partition, load my drivers and install WIN 7.

  Thanks for the quick response!

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Setup could not create a new partition or system to locate a system partition.

  Today, I decided to re - install windows 7 to make it was once again, after saving all necessary files on my edge 1 TB hard drive restartrd windows with the retail CD in the CD drive. I pressed F12 and chose to start with the CD rom, now after several minutes while the CD was put into service, I informed all language settings, keyboard and time and press Next. Then clicked install now.
  ...
  ...
  About 10 minutes later, the next set of options showed, Normal install and custom install. I clicked customized. I then progressed to formate the hard drive and then click to select and then pressed...
  He been said now, "Setup could not create a new partition system or locate an existing partition in the system. So I tried to fix this by removing the primary hard drive and the other disappeared two (excluding the 1 to one). So I then clicked new on this 150G hard drive and then clicked on, it now says the main hard drive. I then clicked Next. ..
  The same thing, "wa unable to create a new partition system or locate an existing partition of the installation system. now I'm stressed and I really want to fix this today, so I came to the internet.

  Please can someone help me?
  -Sent from my iPhone.

  Disconnect the SATA cables to all your drives except the drive hard that you plan to install Windows on and the DVD player. Also unplug all devices except for the keyboard and mouse enternal.

  Then, enter the BIOS and configure the DVD drive as the first boot device.

  Now try the reinstall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Could not create a new partition or locate an existing journal of one.see configuration file

  Separated from this thread.

  I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

  Salvation of demonstration,

  We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information is useful.

  Thank you.

• Firefox 4 beta1 does not show the new user interface

  Firefox 4 beta1 does not show the new UI (not Firefox Button on the left). It is exactly the same as FF 3.6.8 under the tabs on the top function. Also, if I disable the menu bar, UI GET screwed up

  This has happened

  Each time Firefox opened

  Nevermind, I fixed it.
  It seems that, for some reason, the default theme has been disabled (?) for the installation of 4 FF, and everything looked weird and wise as I mentioned in the original post.
  On a side note, next to the default theme, once I activated, it reads "not compatible with FF4.

• Do not create a new partition

  I installed window 7 HP on my lenovo g580 but I encountered some problems at the stage of creation of partition ~ I had 2 unassigned partition and at the same time to create the 'NEW' partition ~ but I got the message saying that "the window cannot be installed in this hard disk space. the selected disk is the maximum number of partition of this type"after I created a new partition which means I got this message when I tried to create another partition ~ what is this average n how to solve this problem?

  Just see it. Also, now make factory backup without bloatware.
  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/creating-recovery-disks-manually-through-RT-S...

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod