Pools of multiple connections with different s the same database schema

Similar Questions

• To connect to vCenter using the same Session with PowerCLI

  Hi all

  Is it possible that we can establish multiple connections to vCenter using the same session with Powercli.

  As connect-viserver-Server "vcenter1" - domain\domainacnt of the username-password "Password".

  is to establish several connections and we want to limit, because we are in the process of report generation based on the web developing using Powercli with IIS.

  Please suggest.

  You can use the Session parameter on the cmdlet Connect-VIServer .

  I use this for the PowerShell Workflows, see workflow of PowerShell and PowerCLI

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini

• Playback of multiple files with different file extensions

  Hi all

  Is there a way where we can read multiple files with different file extensions using file adapter?

  
  
  < property name = value=".*\.csv"IncludeFiles"/ >
  

  Can include us a few models more file in the property above? Please let me know

  Yes you can. .

  But here, the thing you need to do is all these files must have the same format (XSD)

  You can dynamically pass the name of the file to invoke the activity of the file that is the property of jca.file.filename

  The value given when you set up the adapter will be written by this value. .

  Hope this will help you

  If this is not the case, let me know. .

  Thank you & best regards

  Sharath Kumar

• How can I send docs to multiple signatories with different addresses on sign of Echo?

  How can I send docs to multiple signatories with different addresses on sign of Echo?

  Hello

  In EchoSign, you simply have to add e-mail addresses to each signatory in the box 'To' and set the saved order. If you have to close, you must enter your last e-mail address and check the box "I need to sign. The shape that you send must have signature of blocks for each signatory but apart from that, there are other special rules or the necessary implementation. If you continue to experience problems try this, detail your problem here and I'll do what I can to help.

  See you soon!

  EchoSign-Rob!

• When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail.

  Problems with getting mail

  I have windows XP. I downloaded AOL9.7.  When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail. The window to welcome says I'm not connected and click here. When I click on the message I get my mail. Why don't I have to sign in twice?  any help is appreciated, thanks.  .

  You should check with the support of AOL.  It is a forum for Windows.

  Good luck.

• Connection with WiFi increases the latency of the Wired internet

  Hello!  I use a Zyxel P-660HW-D1 v2 802.11 g Wireless ADSL2 + 4 port Gateway, which offers wired and wireless connectivity.  My office is connected via an ethernet cable.  Whenever I access the WiFi using my smartphone, the latency of the internet from my office rises considerably.  Disabling WiFi on my smartphone returns my office for normal internet latency.  Is it only a matter of sharing the wired ADSL connection and wireless at the same time, or is there a way I can keep the normal latency on my desktop using WiFi at the same time?  Thanks in advance for any help or information you can give me.

  AFRO-CARIBBEAN

  I suspect it is the limited nature of ADSL, but you can confirm this by going to speedtest.net and running a test of speed and during the trial to connect with the phone.  If the DL speed remains the same (or drops) causing problem.

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.

• Highlight the files, done Windows double job with them to the same folder. Huh?

  So often, when I copy files, I note several if I do not quickly, Windows (XP 64-bit) is suddenly double job with them in the same folder.  Usually when I'm using the control button and clicking several with my mouse.  Is this a bug?  Not sure who in their right mind would want this feature.  How can I get rid of this constant irritation?

  Hello 2vsllsk,

  Thanks for the reply.  If you select multiple files, then right-click to copy, are you able to duplicate this issue?  You use a mouse or a touchpad for laptop computer?

  Please let us know status.

  Also, how to prevent unwanted automatic copies when I select several files?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-to-prevent-automatic-unwanted-copies-when-i/ef5de96c-9483-4f9d-9966-a0bbb6308bdd

• Images with text on the same page in epub seem to be changing color to the export profile

  I create a fixed provision epub heavy photo and I noticed that after exporting, pictures with text on the same page are exported with a totally different and much more saturated look to them.  As if they were exported under a different color profile.

  All pages that include no text but just includes a graphic/photo, the image appears normal in the preview.  I tried several things like manually set two different images to specific color profiles.  I changed the conversion to ensure that everything is export in jpg format.  Cannot quite understand how to solve this problem.

  Has anyone experience this problem?

  He solved.  The problem was caused by blocks of text that had their transparency set to 0%.  Removing those, the problem has been resolved.

• Same colors that appear different in the same document

  I have a document where I filled the cells of a different picture of the same RGB color. However, they sometimes appear as two different shades, one darker than the other. I checked that it was the same RGB color and it was, but it looks quite different in InDesign and when I export to PDF. No idea why the same color is different in the same document?

  Full transparency on the page causes ID display a preview of the m slipped preview overprinting is enabled, so it can have an effect on the color, but I expect the change affects the spread.  Monitors fault may also have to backlight uneven which would cause this kind of change of color on a screen, but you will see areas of displacement remain in the same positions on the screen when you rotate the page, rather than rotate with the page if the problem is in the file.

• Cost of the execution plan is different in the two databases

  Hi gurus,

  I have two databases, which are 12 C.

  The execution plan cost is different in the two databases for the same query.

  is it possible to copy the execution to another plan.

  Thank you in advance

  Kind regards

  REDA

  Jr.Raj wrote:

  There are a few differences.

  The machine that has a high cost, has setup up, linux, 2-node RAC, more CPU.

  and

  other machine windows server less Setup and less cpus.

  Please explain, cost really makes a difference.

  Thank you & best regards

  REDA

  You simply can't compare costs like that. It does not work like that. Especially through two different systems.  Here is a very good read: column the COST of the PLAN to EXPLAIN. Oracle FAQ

• Can I combine photoshop cc with lightroom on the same PC retail box?

  Can I combine photoshop cc with lightroom on the same PC retail box? I already have Photoshop installed CC...

  It would probably be best to use LR CC 2015.5 the plan of photography with Photoshop CC. Then you get the advantage of the latest tools and features, currently not available in the stand-alone version of LR6. If you have a reason to also run the stand-alone version on the same computer, you can create a second Adobe ID.

• Is it possible to take 2 web apps with both having the same element name (IE: titreArticle, short) and display them in a list in chronological order.  For example something like that {module_webapps id = filter "3673 &amp; 7432" = "classified" itemId = mo

  Hello

  Is it possible to take 2 web apps with both having the same element name (IE: titreArticle, short) and display them in a list in chronological order.

  For example something like that {module_webapps id = "3673& 7432" filter = 'class' itemId = "71755" template="/new/partnernewstemp.tpl" sortType = 'date'}

  Thank you

  Angela Borden

  This is not possible, I'm afraid, you must list each of the webapps separately and then combine and re - sort the two lists.

• How to run multiple copies of distilling on the same machine?

  What version of Adobe PDF Converter do I need to run multiple copies of distilling on the same machine?

  I see that Distiller Server is EOL so what should I use to accomplish the same task.

  Hi mmaraffi,

  You will not be able to run multiple copies of Distiller, because this is a violation of the EULA.

  Let me know the version of Acrobat is installed on your computer?

  Kind regards

  Nicos