Poor performance with office 110-320z

Similar Questions

• life of the battery 8 cells on X61t? Poor performance with Win7?

  Guys, I bought a new battery which, as said by Lenovo, must be executed 7 hours "in some scenarios. Well I could not go beyond 3.5 hours with Windows 7, wifi, screen on 30% of brightness and 5-6 programs that run and processor speed 5-50% (in the power management) + all together for a minimum performance. Is this normal? I ask, because it was produced 2 years ago and I'm afraid that he has lost some of its power since then...

  Note of the moderator; the topic is edited to reflect the content.

  about 15% on average, if she takes up to 70%, then the battery would only last about 3 hours to 3 hours and 30 minutes of CPU usage. I thought initially it was a battery problem, but my friend told me that it is the around the average it became too much. These 7 hours battery time are really just marketing gimmick.

• Poor performance with class PreparedStatement

  Hello
  I have a query that returns results about 10,000 on which I have to iterate.
  The request is something like this:

  SELECT col1,col2 FROM myTable INNER JOIN myTable2 using(id) WHERE time > TO_DATE('15/06/2009 16:28:00','DD/MM/YY HH24:MI:SS') AND time < TO_DATE('16/06/2009 2:35:00','DD/MM/YY HH24:MI:SS');

  This query is very fast using a basic training, it iterate over the line of the cursor in less than 100ms.
  The parties of the date of the request are generated using the string concatenation.
  
  Since this is a bad practice, I decided to use a PreparedStatement class and thus alter the query like this:

  SELECT col1,col2 FROM myTable INNER JOIN myTable2 using(id) WHERE time > ? AND time < ?;

  I bind the dates and I get exactly the same result, except the performance... Now do not 100ms... It takes about 120000ms (2 min)! ?
  The execution of the query is not the problem, the problem comes from the ResulSet.next () method which is much longer than before.
  I said that the exactly the same values are used, the result is exactly the same.
  I tried a different value for the size of the extraction, but not of differences.
  
  Any idea?

  It is likely that the DBMS is having to convert your parameter values to match the column type 'time ',.
  and because of the conversion, you may not use the index on this column, it is a table scan and
  make a temp table to order the results before it can return the first row.
  DBMS offers regularly more regular interpretation with SQL conversion capabilities that they / can for
  Parameterized SQL.

  You can try:

  SELECT col1, col2
  FROM MyTable
  INNER JOIN myTable2 using (id)
  WHERE time > TO_DATE (?, "DD/MM/YY HH24:MI:SS")
  AND the time< to_date(?="" ,'dd/mm/yy="">

  And setString() to set the values of the parameters...

• Poor performance with the slate of HP 7 2800

  Do or can techs HP make remote access with your 7 2800 HP Slate Tablet?

  I do not use too much according to that I first bought and don't think to ask for a refund. Too late. However, perhaps a remote connection would allow the technicians HP Tablet check my tablet.

  For example, I have a hot point of moble. Lit. Had problems of connection and sent to the parameters to verify that the hotspot was listed and ÖUT RANGE"? Got to be kidding me. Also, it was a struggle to ling to the network I want to from time to time.

  I have a LG flexible Bluetooth earpiece/headset still trying to play the music becomes a nightmare. Songs often 'jump' during playback?

  Perhaps a remote control connection could solve some problems if possible.

  Thank you

  Debocombo.

  Sorry, this action you want is not possible.  HP CSR can only remote control in Windows PC.

  You use wifi American channels for your hot spot?  (1 - 11)?

  Slate 7 28xx cannot use European channels above 11.

  Are the songs downloaded on the device, or you use a streaming service?

  Make sure that you have stopped all unnecessary apps running in the background and other housekeeping tasks as to clear the memory cache on the device (settings/storage/tap Cache/Clear Cache.

  WyreNut

• Poor performance with 24 inch screen

  MacBook Pro 13 inch 2.66 Dual Core 4 GB Ram

  Perfectly up-to-date Mac OS Software

  VMware Fusion 3.0 completely up to date

  Windows 7 64 bit

  Mac 24 inch display

  When you run windows 7 by fusion 3.0 I get serious performance degradation when you use mode full screen on the MAC 24 inch monitor.  MAC OS works beautifully on the full 24-inch display, but windows is choppy.  I have the graphics accelerator #D activated the parameters of the virtual machine.

  Any thoughts?

  > The guest OS has a Dual Core CPU and 3 GB of RAM.

  Sounds like a problem of just config here...

  Try to assign 1 CPU and 1 GB of RAM to the guest...

• Flash poor performance with vector art (.svg)

  When using multiple pieces of vector art, I noticed that the performance gets rather sloppy, so I created a program of simple test that shows 100 copies of the same graph and allows to zoom in. I used what seems to be a fairly simple vector image (can see links below). However, we fall fps massively when you zoom in inside or outside. I know zoom requires a lot of calculations, but I have an above average system (processor i5 2500 k) that I expect to handle such requirements. Is there something that I am missing? or vector art is simply not viable for my game (I would need a lot of work similar to the screen at the same time)

  Photo of the image- http://i.imgur.com/Cj50O.PNG

  File - SVG http://pastebin.com/MjBLebFQ

  Test code: http://pastebin.com/Xmquy9Py

  for optimum performance you should use bitmap images (or activate cacheAsBitmap).  But if you do a lot of zooming does not work unless you are editing for a mobile and can use the cacheAsBitmapMatrix property.

• poor performance with lumetri Panel open

  whenever I load a glance in the Panel creative cc2015 first 9.0.2 lag

  win 10

  16 g of RAM

  3 SSD

  I7 prossesor

  Thank you

  Hi jim,.

  It is a known problem in Premiere Pro CC 2015 and has been reported that the respective team and hope will be corrected in future releases.

  So, for now, to minimize the creative Panel and then try reading.

  Vinay

• HP Mini 110-3530NR extremely poor performance on the Internet

  My HP Mini 110-3530NR Netbook has very poor performance on the Internet.  I use Windows 7 Starter.

  Say hello to new coppens1.  I apologize for the delay in my responses.  I have not received the normal e-mail notifications.

  When I had to go to msconfig earlier in our interactions you make sure that the Synaptics driver load with Windows?  Follow these steps to check.

  1. Click Start, type "msconfig" and press ENTER.
  2. Go to the Services tab and search for "HP Software Framework".  This should load with Windows for a lot of the HP software to work properly.
  3. Then go to the Startup tab and make sure that anything it either by "Synaptic" is loaded with Windows.
  4. Save your changes and exit msconfig.
  5. Then go to your touchpad settings and, even once, make sure that the settings are correct.
  6. Finally, restart the machine and make sure it works properly.

  I totally understand if you want to open a new thread as this covered a few topics!  Just make sure to send me a private message with the link so that I can make sure to help you here.

  I wish you a beautiful day JC!

• Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

  Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

  At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

  Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

  Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

  Thank you!

  Success! 32 FF seems to have solved my problems of performance. Thank you!

• SG300 switches have poor performance in layer 3?

  We have several switches SG300 Serices. We use them to route traffic to VLAN remote offices, the Internet connections and wireless access Points.

  In a remote office, we have a SG300-10 facility to route the HQ network and the remote office subnet. The SG300 is connected to the seat through fiber and contains several VLAN Tag. If I speed, tests on the fiber of the entrants Netwotk tag link I get decent performance, 80Mbs. If I switch to a networtk who is not priginating of the central administration and road SG300-10 package, I get poor performance. 15 - 20Mbs.

  I have Fireded until a new FW SG300 - 28 p v1.2.7.76. Added a HQ VLAN 101 and VLAN new, 1025. Mapped some Tagged and not marked for each ports.  Switch has been connected to the network of HQ as untagged VLAN 101.  I put a laptop on a unmarked port VLAN 101. Ran some tests, cam is back with 750-850Mbs. great.  Put the same computer laptop on a Port of 101 tag, set the NETWORK card for tag VLAN 101, same test, same speed, 750-850Mbs.

  I configured then laptop for tag VLAN 1025. Connected to the port 1025 VLAN scored. Done speed tests, the results were 15-20Mbs!

  Then I configured laptop for Untagged VLAN 1025. Connected to unagged port 1025 VLAN. Done speed tests, the results were 15-20Mbs!

  It was only the laptop and connect to the net on the SG300 - 28 p P.C. Why this device's performance is so poor when he needs to route?

  Other switches have v1.0.0.27 FW or FW v1.1.2.0. They have similar speed problems. All configured for layer 3.

  Thank you!

  Scott<>

  How are customer gateways and server configured?

  The default gateway for connecting devices should probably be that of the IVS, they are directly connected to. So if you have a server connecting to a SVI 192.168.1.100 then the gateway server should be 192.168.1.100, not a router upstream. Who can create a loop of road if the return circulation.

  -Tom
  Please mark replied messages useful

• VPN poor Performance - Cisco RV220W and routers WRVS4400N

  Hello

  To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.

  Router VPN /ISP details are as below

  Location was	Location B
  Details of the Internet ---------------------- DOWNLOAD: 6 to 10 Mbps Upload: 1 to 2 Mbps Details of router ---------------------- Cisco RV220W Firmware: 1.0.3.5 IKE policy Encryption: 3DES Authentication: MD5 Group: Group 2 Life key: 28800 sec VPN strategy Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled	Details of the Internet ------------------------- DOWNLOAD: 1.35 Mbps Upload: 1.24 Mbps Details of router ---------------------- Cisco WRVS4400N Firmware version: V2.0.1.3 Phase 1 Encryption: 3DES Authentication: MD5 Group: 1024 bits (Group 2) Life key: 28800 sec Phase 2 Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled

  From the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.

  The servers in A location and users to the site B gets authenticated at the server DC level in A location

  Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B

  The login is your time and all applications are extremely slow.

  I tried to copy files between share data between two locations and the results are as follows

  Location A to location B-> 130 Kbps 140 Kbps

  Location location B A-> 150 Kbps to 160 Kbps

  What can be the problem for these poor performance VPN?

  -Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?

  -Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881)  Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.

  So, what can be the cause of the problem and what can be fixes possible?

  Help, please!

  ANUP sisi

  Beginner to router Cisco VPN, please help

  RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.

  RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.

• Error code 646 with Office updates

  code 646 error when you perform windows for vista was last updated to solve a security problem with office 2003 and set the junk e-mail filter. Another diagnosis did not work and I am never asked to accept the terms. have tried several times. Sometimes my computer talk to me in Chinese because I often use in China, but do not know if this has something to do with it. Have known a lot of probs with recent outlook and very slow responses with other programs may if an intruder is already inside.

  * Title *.
  code 646 error when you perform windows for vista was last updated to solve a security problem with office 2003 and set the junk e-mail filter. Another diagnosis did not work and I am never asked to accept the terms.

  chinaivd,
  To get updates Office installed when you receive the error 646, usually download and install them manually will work.  Look at your history of update and get the KB # updates failed.  Then, go to the Microsoft Download Center, search the KB # and then you download the file to your PC.  Then, simply double-click the file to run it.

  If it is possible to have any type of infection so I suggest that you take a look at these links:

  Get rid of malware

  Can I clean an already infected computer?

  Windows Live OneCare Safety Scanner Windows 7\Vista Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EA6400 poor performance of 2.4 ghz

  Hi guys

  I just bought this linksys EA6400 (ac1600) the router and im having a lot of trouble with her

  im getting the power of the signal very poor and poor networkspeed on speedtest.net because of this

  Ive got 100/10 cable, but wireless 2.4 ghz (ive not yet 5 GHz of adapters) im only get 10mbits on speedtest and sometimes worst way only 5mbits and its only 4 meters (13 feet) away (2/5 bars signal strength on my devices)

  im getting the same or better performance with my old router e1000

  what I tried:

  -The routers to the latest version firmware update

  -updated drivers on PCs and laptops in my area

  -tried other channels 2,4 ghz with no luck at all im getting worse performance on 1.6 and 11 if I leave it in the car, it is the best

  -ive tried to disable the transfer of cutting hollow

  -adjust the width of the channel to only 20 mhz

  -n only wireless network mode

  -factory reset

  -priority implementation of media

  all this he has not improved

  My settings for the moment:

  -all on the car to 2.4 ghz page

  -no priority media

  -rest of my settings are auto adjustment

  What should I do? return the router for an asus router or something?

  any help would be appreciated

  5 GHz is no choice because my pc, the laptop and the phone does not support the 2.4 ghz I will modernize the PC and laptop adapters CA / CC 5 GHz

  my phone should be ok, but I think my older e1000 router was acually better at 2.4 ghz

  Thank you very much

  Jochem

  What Protocol (b/g/n) wireless devices are connecting to the EA6400 with?

  In the connection status of the client devices window, which is listed as the connection speed (54 Mbps, 150mbps, etc.)?

  The link below has some good information about the wireless channel width:

  FAQ of SmallNetBuilder Wireless: the essential

  This article does not take into account changes to the rule of co-existence 20 Mhz Wireless. Essentially if a 20 Mhz signal is detected by the router in the range of 2.4 Ghz router is to drop her at 20 Mhz channel width, which will reduce speeds in two.

  The best solution is to upgrade the client machines to 5 GHz.

  Other things to try:

  1. Support WMM Enable\Disable (I recommend it be enabled if no improvement is noticed with this option disabled)
  2. Activate Media prioritization with a parameter to 100000 Kbps downstream bandwidth and keep all devices\apps to normal priority to start
  3. Only use WPA2 Personal wireless security
  4. Set the Protocol Wireless 2.4 Ghz "N only.

• Problems of huge performance with the list of scrolling on the Playbook (especially Air applications)

  Hello

  It is more of a general question but also for the development of Air for the Playbook and other devices BB10.

  My Playbook has huge performance problems when it comes to scrolling lists.

  And this problem exists with almost all applications (not the ones that I have developed).

  For example, take a look at the app NTV - such its bad, its almost unusable because it's so late when scrolling lists.

  I don't know how this app was developed, but I guess it's Webworks or Air.

  You can see this delay also in the official app of Facebook: it's the same poor performance when it comes to scrolling.

  I guess this Facebook app is also WebWorks or Air.

  So Air or usable at all WebWorks?

  This performance is not fun, and it has no sense to develop applications with this platforms if these performance issues are of type platform.

  Now, my question is - is it true that the only platform that "really works at all" (about performance) is the native "platform"?

  Or is it a problem in the current version of the Playbook OS?

  Else you have noticed that this operation met during the scrolling of lists?

  Thank you

  Bullety

  It's a question AIR, specifically made software. All of the applications you listed are AIR. Try something like Scrapbook, and you see things how smooth can be (waterfalls).

  I saw not the same problems when using WebWorks with Sencha Touch. It is also quite possible to make things smooth in the NDK with waterfalls, but it's only for BB10 (for developers non - RIM). So cannot use it PB BB10 release (end of 2012).

  I also note that the new fuse QNX user interface components are much smoother than conventional QNX UI components. If you use make sure you air that you use.

• ISCSI performance with HP DL160 G6 and ESX 4.0

  I feel iSCSI performance with HP DL160 G6 and ESX 4.0 servers and would like to help with this.

  I have Setup iSCSI on 3 * ESX 4.0 host.

  Each have a corresponding single target and a single LUN on the SAN. The LUNS are formatted as fmfs3 types.

  Each host is connected to the QNAP San in the same way via a Gigabit switch.

  All NICs operate at 1 GB.

  To test the performance I use vmkfstools to clone a drive from the local store to the LUN

  On the first host (a DL140 G3) performance is good to 48 MB/s.

  On the 2 DL160 performance is very poor and barely reach 2 Mbps

  During cloning, DL160 servers save also on several occasions by the following in/var/log/wmkwarning:
  Vmkernel servername: 0:05:23:53.214 cpu2:4308) WARNING: NMP: nmp_DeviceRetryCommand: device 'naa.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx': waiting for updated status of fast path for blocked with e/s failover. No prior reservation is on the device.
  Vmkernel servername: 0:05:23:54.195 cpu3:4210) WARNING: NMP: nmp_DeviceAttemptFailover: try tipping unit "naa.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" world - order 0x4100051a20c0

  I made sure the servers are up-to-date:
  DL160 G6 Configuration:
  ESX 4.0.0 build-702116
  2 * NIC HP NC362i GB (firmware 1.7.2, driver 1.3.19.12.1)
  1 * smart Array P212 controller (firmware 5.14)

  The SAN server configuration:
  QNAP Ts-459u-rp (firmware Build 0302 T 3.6.1)

  I looked everywhere for an answer.
  I also tried the "esxcfg-advcfg - s 1/VMFS3/FailVolumeOpenIfAPD" as suggested on some positions.
  All to nothing does not.

  Any help / advice would be appreciated!

  is this software iscsi or nobody to support iscsi?

  Because all messages from vmhba0... Usually the software iscsi Setup with vmhba33 or vmhba36...

  Can you check vmhba0 keeps the volume...