(Poorly made) MDS network change of type of output returned content?

Probably badly formulated question, but what I found that if I'm out JSON to a URL that ends with devices = true, no problem and I disengage & can parse JSON such as:

{"newStore":"false","storeInventory":"2011-04-30T14:07:43.203Z","storeRefreshed":"2011-04-19-T18:36:1.8792"}

If I test my application using the MDS Simulator and the same URL that ends with devices = false, I get are not clearly JSON and I get something in the lines of:

\\u0010\\b\\u0001\\n\\u0002\\u0001\\u0003\\t\\ttext/html\\u0003\\u0005\\u0080\\u0080\\u0080\\u0080j\\u0007\\n\\u0080\\u0080\\u0080\\u00813\\u0080\\u0080\\u0080\\u0080\\u0000\\u0000\\u0080\\u0080\\u0080\\u0081\\b\\u0001\\u0000y{"newStore":"false","storeInventory":"2011-04-30T14:07:43.203Z","storeRefreshed":"2011-04-19-T18:36:1.8792"}\\t\\u0001\\u0000\\u0001\\u0000\\u0000\\b\\u0000\\u0000y\\u0002\\u0000

I'm not an expert of MDS, but I must be missing something obvious, so any suggestions or solutions are appreciated.

Again, I apologize for the badly phrased question - lame excuse, I have a cold.

A possible clue, "Content-Type:application/vnd.rim.html", it's interesting...

<2011-05-02 10:03:09.794 EDT>:[146]:::
<2011-05-02 10:03:09.794 EDT>:[146]:::
<2011-05-02 10:03:09.794 EDT>:[146]:::
<2011-05-02 10:03:09.794 EDT>:[146]:::
<2011-05-02 10:03:09.794 EDT>:[146]:::
<2011-05-02 10:03:09.794 EDT>:[146]:::

The SDM can transcode the data, especially if she thinks it's the Blackberry browser, in order to optimize the browser experience. To make sure that it is not, I thought that all you had to do was to make sure that you have not set a User Agent which included the BlackBerry to BlackBerry customer demand. What headers you set? The server defines a content type?

Tags: BlackBerry Developers

Similar Questions

oracle.jbo.domain.Number, round() method to change the type of data returned?
Hi all
When I tried to round the value to oracle.jbo.domain.Number, it returns data of type oracle.sql.Number. Please see the following code snippet:
Number unitPrice = new Number (9.95);
Number of numOfRet = new Number (5);
Total = (unitPrice.multiply (numOfRet)) .multiply (1.05) .round (2);
The third line can not compile because the round() method returns a data type of oracle.sql.Number, which generates the compile error. If I put a guy up there, it works. When I checked the javadoc, the method has a number of return type. But it says in the details of the description of the method, it returns a Java int. Can I ask is there something wrong here? You can find the javadoc here: number (Oracle ADF business components API Reference 10.1.2 areas)
Thank you
Sheet
Order to understand, the problem is that the round() method returns a number, but a NUMBER data type.
NUMBER public tour (int decimal_place)
Therefore, cast to the number.
Timo

Need ip vm info to change the type of network adapter
Hello
I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?
Thank you
Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false
PowerGui FAQ.
Q: how to start the administration Console in 32-bit mode on a 64 bit system?
When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console. This option will open the default version of the administration Console. The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers. Actually, on computers 32 bit, there is only one version, 32-bit version. The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks. To do this, you have a few options:
1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.
2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }
3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"
Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode. Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

I can not change the type of standard user to the admin account.
I had a very difficult time, adding new accounts to the system. Now that I have, I can not change the type of standard user to the admin account.
As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
1 restart in SafeMode with network.
2. log on as an administrator.
3. click on start.
4. type the three letters cmd in the search box.
5. press on Ctrl + Shift + Enter
6. click on "run as Administrator".
7. type the following commands and press ENTER after each:
NET user
(This will show you all existing accounts)
net localgroup administrators 'xxxx '.
(This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

Change the type of NICs using PowerCLI fails
Hello world
I'm changing the type of network adapters in a specific VM through the CLI interface, running on VMware ESXi 4.1
Connection to the ESX host and find the desired virtual machine are pretty easy. The beginning of the troubles, when I enter the command get - vm < virtual computer name > | Get-networkadapter | together-networkadapter-type vmxnet3
So, I get:
Together-NetworkAdapter fault. RestrictedVersion.summary
+ get - vm Sophos-UTM | Get-networkadapter | together-networkadapter < < < <-type vmxne
T3
+ CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], RestrictedVersion)
+ FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_SetVirtualNetworkAdapter_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter
Apparently, I am doing something wrong here, but so far, have been unable to determine what the problem is.
Could someone help me, please,
Concerning
Tobias
I have encountered this problem before, this article will be useful for you.
http://www.virtuallyghetto.com/2011/06/dreaded-faultrestrictedversionsummary.html

Qosmio F10 - cannot change the type of HARD drive in the BIOS
I want to change my hard drive, but the category in the BIOS is not editable.
I can not change the type of hard drive in the BIOS on my desktop PC.
Hello
And you want to change in the BIOS now?
I put t know which option you mean exactly
The drive in the BIOS, you can change t. That's why you should buy a new

Change the type of sensor pressure strain for SCXI-1314
Hello!
I would like to ask how to change the type of strain sensor.
I use SCXI-1314 and one of my pressure sensor is a type of 4-wire. (Output 100mV, excitement: 10vdc)
, but I want to replace the sensor by another type of current output type. (Output 4 ~ 20mV, excitement: 12-30Vdc)
I checked the output voltage cable 4. (Defined as full-bridge OR max)
Power + = Ex +.
Food - = Ex-
CH+ = S+
CH- = S-
However, I don't know how to connect the type 2-wire with SCXI-1314.
In addition, I don't have enough experience on the types of bridge (bridges and whole, quarter half)
Can you explain what I need to do?
One thing you migth try is to put a 5 Ohm resistor in the current loop. causing a drop in voltage 100mV on resistance, however check the soil conditions. Since you will need a new calculation of sensitivty sensor anyway you can use a resistor 4.7 Ohm or 2 10 ohms in parallel... just find a good match between your 1314 input voltage range and the 4-20mA.
And you will have an external power supply for the sensor.

Can you change the type of device to 'USB Raw resource' to GPIB controller?
I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX. I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller. I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them. Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver? Thank you for your time.
N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

Change the type of serial number of UUT
Hello
I am a new user of Teststand and I would like to change the type of serial number to USE.
or add condition number of the operator to write in the information of the object to measure dialog box.
I want the serial number that have just number 20 and no letters.
If the serial number is different, the dialog box should reappear as at the beginning.
Hope that I was clear.
Thank you
You will need to replace the PreUUT callback and then build some sort of algorithm to verify the serial number desired.
I've attached an example of how do.

Update of cases in the structure of the case after having changed the 'Type of case.
Hello
After you change the "Type of business" (only one case has been deleted), I discovered that in cases of strcuture cases has become "damaged": case "named" have been changed to digital small (that is, 0, 1, 2, 3).
Is there a way to den strcuture case?
Thank you
Pavel
Right click on one of the enums greyed out and choose 'review and update of Type Def. That should allow you to solve problems.

How to change the type of insurance policy indicator on front panel
Hello
I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.
Yoppy.
Go
LED > right mouse click > Create > property Node > Label > police > name
then use (or)
Digital > right mouse click > Create > property Node > digital text > police > name
Kind regards.

Change the Type of Interpolation of waveform graphic part
Hello dear colleagues,
How can I change the type of interpolation to a graph of waveform in part? Check the attached photo.
I don't want yellow interpolation to the beginning of the measure.
I know that the interpolation can be modified with the property node, but this has an influence on all points.
Any idea?
Thank you very much.
Hi maximint,
-NaN values used to hide unwanted in the plot points
-use separate plots when you do not want the "edges" in land line

How can I change the type of chassis in an existing CompactRIO project?
Hello
I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?
Thanks for any help!
Dave
Hi Dave,.
Once you've practiced it several times it is actually a piece of cake.
Right click on the project select new target or device
Rember just to specify rather than the current goal.
Otherwise, you will have a conflict.
The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.
Copy (drag) all the components for the new device (RT & FPGA if included)
Note it's manual labor rather than you have to 'say' labview what material he must understand!
concerning
Xseadog

Cannot change the type of administrator account during an administrator account
Hello I seem to be stuck with the normal start safe mode and tried several things without success.
So far I used Safeboot/restart and restart with normal startup and "clean boot" method of
following the suggestions on the Microsoft Web site. Also reset all services by default. Whenever I try to start a service, it gives me the error 1084: Windows could not start the Windows Service on Local computer error 1084: this service cannot be started mode without failure or error 1068 "the dependency Service or group could start. Only some of the services have actually begun. Also, I can't in some documents and files, such as Documents and Settings and Config.Msi. With the error "there is no location (path) is not accessible"access denied" Almost all set so that it starts in the service is stopped and does not let me start with the same 2 errors. I tried to use the Windows Defender update option after the beginning of his service and I come with error found: Code 0x8007043c. I went to check if I had administrative rights by setting account type for my account current (user) who says it's an administrator account already, but he said that it is standard. When I try to switch to administrator it just combines the button "change account Type". At this point I don't know what to do besides restore my registry. I can provide a few previous actions if you need. I don't think I'm going to tinker with things more far away, however, in fear of complicating it. Any help would be appreciated.
Don't give me the option to the Windows recovery environment in the startup options (F8), although it could be F2 or F12, I noticed for another set of options to start the computer (Windows Vista Ultimate). Furthermore, after being not able to use the WIndows recovery environment, I just went ahead and used Directory Services Restore Mode. After doing this I used the system restore and restored to the last point that he had saved and it solved the problem - once he had fixed services. I want to note also that, File Checker (SFC.exe) system, fixed a problem I was experiencing a lot more before with my computer takes about 3 minutes to start. Now it is lightning fast. Thanks for the help, and I hope this helps others who have the same problem (s).

Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?
Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?
Hello

The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

Hope this information is useful.

(Poorly made) MDS network change of type of output returned content?

Similar Questions

Maybe you are looking for