-Pop-up notifications (mobile data and system update)
Hello.
I am having some problems with the pop-up notifications. I'm on a prepaid monthly plan and sometimes my mobile data is not 'free' which means that I have fresh when I turn it on. Before I had a pop-up notification whenever I try to enable mobile data, attention that this may have costs. For some people, it's pretty boring, but for me it was perfect because it would be a protection for all the times I have turn on mobile data by mistake. Now this pop up shows no more. I think I should have clicked the "do not show this new 'option." Does anyone know how to get it back?
The other thing is to know how to get permanently rid of notification of update of the system. I don't want 5.1.1 as the battery life is a little ridiculous that this notification is always coming from time to time. I clear the "software update" application cache and it will, but always comes back after restart.
Thank you
Hello
I think you can get the pop-up notification for mobile data if you go to settings > Apps > the 'All' tab > phone > clear data. Note that you could have two of the phone app then erase the data for each group and then restart the phone.
About the software update notification, I don't think that you can completely remove it unfortunately. He always appears after reboot.
Tags: Sony Phones
Similar Questions
-
Update of data /Operating System update
When a Microsoft Windows operating system or the security update is deployed, to correct, to prevent a 'problem' in Microsoft Windows devices: phones, computers?
Is possible problems, such an event can cause with other devices, attaches to USB, and are compatible with Microsoft Windows devices?
Taken into account in the development, the introduction of this operating system, updates?
As it may require a later update to correct the, these "problems" caused by the update?
Although other devices compatible systems operating and system updates can take part of the "rap" for problems?
Hi Wilmot,
Please contact Microsoft Community.
To better understand the issue, I would need more information on your side.
1. do you have problems after you have installed the latest Windows updates?
2. If so, what exactly is the problem that you are facing?
3. also, let us know what is installed Windows updates Knowledge Base article numbers recently?To find the number of updates of Windows, Knowledge Base Article view your Windows Update history:
Open Windows Update by sliding into the right edge of the screen and click on settings.
Click change PC settings, and click then on update and recovery.
Click view update history.
Please provide the necessary information to help you further, I'll be happy to help you.
-
IPhone 5 C Date and not updated
Hi, after the last update IOS 9.2 I foud on this date and time are no longer works. Even I set automatic or manual configuration.
Is this a bug? Is this a hardware problem?
Please, I beg you. someone who can help me?
Concerning
Hey IP5c,
Welcome to Apple Support communities.
Information and troubleshooting in the article below should help you to solve the problem with the date and time, do not update correctly on your iPhone 5 c.
Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support
See you soon.
-
says it's expired when he says that it is updated on the Web site
If you get a pop-up message asking to update Firefox or plugins then this message is probably a scam and you should never respond to such reporting to avoid being infected by malware.
- Don't update Firefox via "> about" or by downloading and installing Firefox from Mozilla and server never using a popup or a link on a web page.
- Plugins should be updated only through the plugin itself, or by visiting the home page of the plugin.
Make a check of malware with several malware scanning of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
I have a 10 years, Dell Dimension 4100 purchased with windows ME, set level to windows XP. On the updates of windows years for safety and the operating system has consumed almost my hard disk space. I have to keep these files? The last s DOWNLOAD integrates all the previous updates?
You mean the $NTUninstall files? These are usually safe to delete, read here first:
http://WindowsXP.MVPs.org/Hotfix_backup.htm
MVP Doug Knox has to a tool to help in the removal of these items, see here: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm
John
-
Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)
My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.
I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?
P.S. I had and have the 32-bit version of Windows.
ny6uctblu,
Have you checked with HP on any problems with this software? Here is a link for download of HP for the software. You should also check that your BIOS is up to date. I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely. This thread can also give you some other ideas.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have an iPhone 5 c. When traveling abroad, I delete mobile data and precariousness. In this case, I don't have any data, but the company phone bill me because he says that he has small connections. Could you tell me how to solve this problem?
What do you mean by "roaming", internet?
I would suggest turning point first and then airplane mode turn on Wi - Fi. With this configuration, you don't have data problems and must be always able to reach sensitive areas.
-
I have problem with my Mobile data
I am using Lenovo X 2 - AP
and I've updated for android to these daily 5.0 version
(why, I don't have internet or ADSL I have update my mobile data, I download update on yesterday and install the update on this morning (GMT + 7))
Everything works fine.
Then I try to update my applications.
The problem starts at these points, while I update my apps
Some applications can't be updated due without internet connection
but there are always 4G icon on mobile data in the top left
so I order my internet connection using facebook or chrome applications
and I found my dose of mobile data does not
If I try to use USB Personal Hotspot and I found that my mobile data can share in my computer
but I don't know why I can't use my mobile data on my phone
Sorry for my bad English skills
I hope you guys can help
Thank you
OK everythings fine now
I factory reset my phone and it is working
Thank you
-
X 220 hotkeys not working do not since the system update
Hello
I used the system update this morning and checked all the updates, including the newest driver Intel for my X 220. After that, most of the Fn keys and the info on the screen has stopped working. I uninstalled the Intel driver and Hotkey driver and install again, but the problem was still there. Now, I even uninstalled all the software Lenovo without driver and system update to install brand new, but the keys still don't work.
Do you know if it is a general problem with the latest Intel driver? Or this have to do with some other update?
Thanks for your replies!
Uncaught,
Try to uninstall hotkey, Power Manager and power management driver, then perform a reboot, and then install the driver power power management, Power Manager, and hotkey.
See if it helps.
JMT
-
Update and Mobile Data does not!
WiFi still works, as do calls.
The small 'g' icon disappeared also.
I have displayed/hidden mobile data, airplane mode, rebooted dozens of times - still no mobile data.
Network and credit are both fine.
Help, please.
icons g means you are using GPRS?
try to set your APN settings. contact your network for these parameters.
try to set your network to the largest type in your area. (wcdma, lte only) then restart
-
Programs like Windows Mobile Device Center and DynDNS Updater hangs
I am facing this problem with several software. When I try to launch Windows Mobile devices, it crashes or closes just without any notification. A window pops up saying Windows Mobile Device Center has stopped working and gives only 2 options closing program and 2nd-check online for a solution and close the program. It is the same with other software like DynDNS Updater 4.1.6 I downloaded from http://www.dyndns.com/support/clients/ . Windows mobile device center window details of the problem as below
Description:
Stopped working
Signature of the problem:
Problem event name: CLR20r3
Signature of the problem 01: wmdc.exe
Signature of the problem 02: 6.1.6965.0
Signature of the problem 03: 465eefc9
Signature of the problem 04: mscorlib
Signature of the problem 05: 2.0.0.0
Signature of the 06 problem: 4889dc80
Signature of the problem 07: f51
Signature of the 08:0 problem
Signature of the problem 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Pls Help, I don't want to swith back to XP as Active sync and this software works fine on XP. I think it's the problem of compatibility of programs with VistaI use Home Premium Version SP1 and I don't have the same day once because after the previous installation, my PC got slower after full update.My configs of machine areDell XPS M1330 LaptopT8100 processor965 mobile chipset3 GB RAMHARD DRIVE 320 GBDushyant salvation,
- You have security software installed on the computer?
- Since when are you facing this problem?
- You did changes to the computer before this problem started?
Before solving the problem, I suggest to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
Step 1
Uninstall Windows Mobile device under Windows Vista programs and features. Access the link below and follow the steps in the article to uninstall the program.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step 2
Follow the steps below only once you have backed up the registry.
a. Click Start, in the search box of start, type regedit and press ENTER.
b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
c. in the navigation pane, locate the following registry subkey:
d. in the registry editor, navigate to the following location: HKEYCURRENTUSER > SOFTWARE > MICROSOFT > WINDOWS CE SERVICES > PARTNERS
e. check the keys referencing your mobile device and right-click on it and remove the keys.
Note: The problem may occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps in the link below:
http://support.Microsoft.com/kb/322756
Step 3
Restart the computer and download the Windows Mobile device Center on your computer the link below and install it and check if it works fine without any errors.
http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx
You can also uninstall and reinstallDynDNS Updator 4.1.6 program and check if it works very well.
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
What to remove the genuine ms my system.i notification obtained from the window updates
Mr President.
How can I remove the genuine window notification that I can't install it.Window updates I remove everything dowload, but every time I start my system its proves again that the notification.do I have to remove this notification. ? and I don't want to like this notificationPLEASE ME HELP SIR TO FIND THE SOLUTIONYour installation is a counterfeit
The key used is one that was never issued by MS - and is a Volume license key.
This key has been generated by a computer hacker tool.
IF your COA sticker is for Windows XP Pro, you * may * be able to change the key to that on the label, using the tool to update the key product - http://windows.microsoft.com/en-GB/windows/help/genuine/product-key
If the COA sticker is for WIndows XP Home Edition, you will need to reformat and reinstall it from the original recovery media for your machine, or OEM System Builder disk - after saving your data on external media.
-
I Z320 smart phone with the data of the limited phone and I would like to use wifi in the navigation, update apps and other animals that can wear out my data, can I do and how I can spend according to the data of the wifi phone? Also I have dual sim, can I use a SIM data card slot and one for the phone and send SMS. I'm still a novice, please bear with my stupid questions. Thanks to all those who give their time to respond to my querries.
SMS = text
When wifi is connected, your phone uses Wi-Fi only, so you don't need to switch the SIM card, either by the way if you want to be 100% sure it will not be used, you can just use the quick toggle setting to toggle mobile data connection.
phone Acer, normally there is a quick setting of mobile data, you just pull down the notification bar.
Google game you don't need to activate, but check if updates will automatically install only if you are using wifi.
-
BlackBerry 10 Mobile data stopped Wroking after update 10.3.1 OS (URGENT)
Hello
My mobile data was working fine before the update, I used 4G and Edge one month on 10.2 before this 10.3.1 update, now it shows signs of Connection (E or 4G), but it does not work, I tried to change carriers to check if there is network problem, but it remained the same.
Thank you
I suggest that you try the method of loader automatic very clean and very energetic and reload your OS:
Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.
You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)
Good luck and let us know!
-
No mobile data service after 9.3 update on iPad 2
I have an iPad 2 which I've updated to ios9.3. After the update my mobile data do not work. It keeps saying no service.
I tried to reset the settings to toggle airplane mode on and turn the iPad but I have no service.
Help, please
Same question - talking Apple, try an IOS re - load via ITunes - no luck. Running out of options. Thank you
Maybe you are looking for
-
I downloaded Firefox 4. There is no file or change bar, so I cnnot change my Gmail
Firefox 4 is not the traditional toolbar at the top where, normally, there are functions of one in the format and changing currents of air and e-mails - I use e-mail to Google. I would like to know how to solve this problem or how to return to Firefo
-
Right-click on the program icon to create the desktop shortcut - nothing happens?
I right click on any program icon to create a shortcut on the desktop and nothing happens. It is as if he has forgotten what to do when you right-click. How can I fix it
-
where can I find the number of contract ACS to create an SR?
Hey guys,. I can connect our old acs web url and look around, but I can't find where is the contract number to the service request with cisco tac. seek help. Thank you
-
Windows 7 Upgrade Advisor didn't finish and restore to Windows Vista
I try to install Windows 7 and started using Windows 7 Upgrade Advisor to examine the State of Vista. A number of questions appeared so I did the updates or of facilities such as specified. I then re-ran and it shows now no problems. The only things
-
Suddenly my X 200 stylus functions are broken
My x 200 Tablet worked fine last week. Now, suddenly the gum does not work, the cursor is returned in any orientation in addition to Primary Landscape, and I cannot calibrate because the calibration software does not recognize clicks from each end of