pop up window say fully charged battery

Is there a way to get a pop window to tell me when my battery is fully charged the way it does when the battery is low?

Is my laptop: laptop HP Pavilion g7-1075dx

There is no setting in Windows or a free utility that will give you an alert for full charge of the battery alerts. Many customers are satisfied with paying third-party utility that can be downloaded from the following link:

http://batterybarpro.com/

Tags: Notebooks

Similar Questions

  • BlackBerry Smartphones stuck on 'low battery' with a fully charged battery

    I have a Blackberry Curve 8330, I have had for years and never had any problems with it.

    But today, the battery is dead even if I loaded last night, I thought a little weird.  Came home, plugged into the wall, but although it recognizes to be connected with the little zig - zag, he is not required to load.

    I think that "grateful" is a better way to phrase it.  I put the phone battery from a friend, who fortunately has the same model as me, and his recognized the same battery as being almost fully charged phone and had no problem, but when put back in my phone, it says "low battery", guard the radio is off, and as soon as I unplug the wall adapter, the phone stops due to low battery.

    Tried with its battery too, recognized both as low battery.  She apparently is not the batteries or the charger or the actual usb port, and I am at a loss what to do.

    I have not downloaded applications, or updated the operating system during the weeks, so I don't know why you would choose now to start doing this.  Does anyone have an idea of what is wrong, and what I can do about it? Or is my blackberry doomed?

    Well, after the one on the desktop without the battery in it, it started fine this morning with a fully charged battery and is fine.  Hoping that he'll be fine next time I try to load it.

    Problem is at least temporarily resolved, thanks for the suggestions of things to try.  At least she stopped me from throwing my phone something = P

  • I get a pop up window saying windows is looking for a sonic Update Manager file

    original title: unsubscribe

    I get a pop-up window saying windows is looking for a sonic Update Manager file (said scan.msi) and can't find it - he is constantly back and forth w/Setup attempt and then returns to "Please install the scan disk file" which I DID not!  How can I get rid of this, and which upped in the 1st place?  Did not request a scan?  I am using iolo System Mechanic installed by Dell and do not know if something in this program attempts to run a scan, but it's very embarrassing to have these pop up screens constantly fight w/each other - I tried to cancel out of them, and they just continue to flow upward again and again.

    E-mail address is removed from the privacy *.

    Hi Barbara a Woodin,.

    1. did you of recent changes on the computer?

    2. do you have sonic update manager installed on the computer?

    If you have Sonic update manager installed on the computer, then check out the link below and try the steps mentioned them, check if it helps.

    Update Manager (Service) issues and resolutions

    For further assistance, you can post your request in the community forums of Roxio.

    http://forums.support.Roxio.com/Forum/105-Sonic-applications/

  • pop-up window, says "winrscmde has stopped working".

    pop-up window, says "winrscmde has stopped working". I did a malwarebytes update several times and there is no virus.

    After the window is closed it will be always in a few seconds. When I click on "check online for a solution" will be right back with the same pop-up window.

    Problem event name: APPCRASH
    Application name: svchost.exe
    Application version: 6.0.6002.18111
    Application timestamp: 4acfb17d
    Fault Module name: msvcrt.dll
    Fault Module Version: 7.0.6002.18005
    Timestamp of Module error: 49e0379e
    Exception code: c0000005
    Exception offset: 0001da22
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional information 1: e51a
    More information 2: 4c0d4d78887f76d971d5d00f1f20a433
    3 more information: e51a
    Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433
    Operating system: Windows Vista
    Read articles:.

    Hello Solphins,

    What was the result of the execution of the SFC from an elevated command prompt?

    Often, we see crashes as a result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following article describes this process:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Let us know if you have any questions.

    Best regards

    Matthew_Ha

  • I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

    I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

    What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

    Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  • Whenever I try to play a game I get a pop-up window saying I need to update my Flash Player from Adobe.  I did 3 times

    I tried to play Candy Crush & Solitaire all day and every time I try I get a pop-up window saying I need to download a new version.  I have downloaded 3 times today & reset my email and password and still can't get anything to load.  What is going on???

    This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

    If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

    If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  • HP pavilion x 360: works with a fully charged battery

    Hi, when I work connected to AC with the battery fully charged, it damages the battery? or the load is stopped and I get HQ directly to the PC?

    Thank you!

    Hi @avisaf,

    Thank you for your inquiry.

    There is no harm in the use of current alternative when the battery is fully charged. Once the charge is completed it stop the load until the battery again reached a specific parameter, date on which it will begin to load it again.

    He stops the load cells when they are full and gives more power when they are too weak. Prevents them from short circuit or having too much power from their part. The best thing about Li - ion cells is that you can just reload them here and there, giving them a bit of power every so often, a full charge. They are how to always have a life expectancy of so many cycles and so eventually lose their charge max (read once you run the battery for).

    One thing essential to consider (depending on where you live) East of power cuts, if the computer you suddenly lose power, it is not healthy. Ditto for your laptop, if you have removed the battery. The battery works as a UPS (uninterrupted power supply) so you can always use your laptop and turn it off safely.

    All rechargeable batteries have a limited number of charge cycles and should be replaced.

    Here is a link to HP - laptops test and calibrate the battery (Windows 8) if you need.

    To say thank you for the reply, please click on the thumbs upwards the button below.

    If you think that I addressed your concern, please choose the solution provided to help other people to find this information

    Concerning

  • Fully charged battery turns off AC

    After the last windows installation updated, I noticed a strange behavior of the battery/AC mode.

    When the battery charge reaches 100% the indicator AC is turned off and the laptop running on battery power (decrease its performance even by selecting high power plan Performance).

    If the power cord is unplugged then replugged the AC light is on until the battery is fully charged again, as soon as the battery is fully charged notification windows battery icon changes of "99% available (plugged in, load)" "full" and then AC is turned off and the laptop starts to run the battery.

    This problem started after windows installed automatically updated, no BIOS or computer laptop specific software have been updated.

    Model: Sony Vaio VPCF23BFX

    Does anyone know how to fix this? I want the laptop to run AC AC is plugged in, even if the battery is fully charged.

    Thank you.

    Hello Rafael,.

    Please keep us updated on the status of the issue.

    I'm sorry for the late reply.

    I appreciate your efforts and your time.

    I suggest you use the suggestions in this article and check if it helps.

    Reference:
    VAIO laptop battery failures
    https://us.en.KB.Sony.com/app/answers/detail/A_ID/42608/p/48903, 49902,53617,53672/c/65,66/kw/vaio%20battery%20troubleshooting%20guide

    Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps.

    Thank you

  • HP ENVY notebook - 15 t-q400 CT: fully charged battery must be disconnected or not?

    Hello

    I have a battery of reagarding question. I want to know when my complete device charged then its load stopped? and his converts to the direct power? or again, it loads is not good for my battery?

    What should I do when my HP Evny fully charged device? Should I do it unplugged or not?

    Thank you.

    Hello:

    Here is a link to the HP battery care Guide... It will give you advice on how to get the life the most out of your laptop battery.

    http://support.HP.com/us-en/document/c00596784

  • Pop up window saying reactivate windows on the internet in 3 days, 2 days now, is this a virus?

    When I start Windows XP, a pop-up window appears saying that, due to the additions of recent hardware, I need to reactivate Windows. After I closed this window THAT XP starts and then another window appears telling me I need to here my copy of windows on the internet. It gives me three choices, 1, activation over the internet now. 2 I want to contact a representative by phone to activate it. 3 more later remember to activate it.

    It started with a delay of 3 days it's now 2 days. He also taells me that if I didn't reactivate Windows XP ater 2 days, I won't be able to use it.

    E pop-up window has the Microsoft logo and a link to the "declaration of priacy Windows Product Activation"

    I guess it's a virus that has slipped into a scam. Someone help please.

    Jeff Ashberry

    Hello

    · What is the number and the model of the computer?

    · You have made the change and the hardware in the computer?

    It doesn't seem to be a virus on the computer. I suggest you to visit the links below to learn more on the subject, you are facing:

    Technical details about Microsoft Product Activation for Windows XP: http://technet.microsoft.com/en-us/library/bb457054.aspx

    You are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295

    How to activate Windows XP: http://support.microsoft.com/kb/307890

  • Sansa e260-how know when FULLY charged battery

    I just bought a Sansa e260 MP3 player. I have connected to my PC around 16:00, and it is now about 19:00 and the device is always showing the bit at the bottom right - battery indicator green flashing: past left right and to the right of the battery icon, there is a constant display of what appears to be a lighter yellow icon.

    Can someone please tell me how do you know when the battery is fully charged to the top?

    Thank you.

    Thank you all for your very thoughtful advice. I didn't feel OK with the unit, so I returned it and got a Sansa Fuze - 4 GB, and it works like a charm on the same port. I'm very happy with it.

  • My tablet of windows 8 frozen has just with no possibility to change the office or reboot! Fully charged battery.

    What can I do?

    It took me a while to answer because I didn't know I had to go back to the thread and could not understand why you did not get my answer by simply pressing the button answer.

    In fact, my problem was solved the next day when I rebooted my surface and found it to be in the middle of the reconfiguration of an update. No other problems. Thank you.

  • SatelliteU300 will not start with power connected and fully charged battery

    I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

    Any help appreciated.

    Hello Andy

    Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

    Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

    Bye and good luck!

  • Fully charged battery of notification on iPhone 6 s more.

    How can I turn off the vibrator and lighting to display alerts when the battery has been recharged. It is irritating and wake up during the night. I don't care to know that the battery has reached full charge, while I'm fast asleep.

    This feature is not integrated with the iPhone. You have a "Battery Monitor" application?

  • I want to know if my Acer V5-571 has fully charged battery automatic shut-off a manual check.

    Anyone? Thank you!

    Hello

    If you want to confirm that the battery cannot overload, yes it's a basic feture in any device running on battery, these days. could reset ensures that the battery could not too fresh, but if the thing you want, please explain. See you soon

Maybe you are looking for

  • What are the blue lines in the edition of flex?

    What are the blue lines in the edition of flex?

  • Can I use the Qosmio recovery discs to recover the Satellite P750?

    I have a Satellite P750 with an irreparably damaged HARD disk and none of the recovery disks. I have a Qosmio X 770, I can make the recovery disks from. Both machines were equipped with Windows 7 and the two license codes. Can I use recovery since th

  • Toshiba PX1266E - 1 25 external hard drive (250 GB)

    I had a glance at the map, I don't see anyone with a similar problem, so I am posting this in the hope that someone can help me. I currently have a HDD external Toshiba PX1266E - 1 25 (250 GB) that is causing me problems. I have two laptops that I us

  • IMAQ select line

    Hello worldHow can I reduce the zoom of the select line IMAQ in Labview? (You can find it in the model---> Vision and Motion---> visionique---> Select Region of Interest---> Select line)

  • Clicking HP deskjet D5560

    My printer makes a clicking noise before each printing. The noise comes from the right inside of the machine looking from the front (the area is ink nozzel cleaning area). There is no paper jammed anywhere. The prints are great. The noise occurs when