Port of DRP and node Configuration of workflows in the Env Production

Similar Questions

• "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

  "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

  Uninstall the trial version, and then install the CD-ROM version.

• Using the AVCHD settings and 60 fps creates problems when the final product will be at 24 fps

  Using a canon vixia HF R62, trying to get the end result of highest quality of my work. I learned that shooting AVCHD to 60 fps is the highest quality I can achieve. What problems can I encounter when the final will be played at 24 frames per second?

  Suggestions for the workflow would be greatly appreciated, as I'm at the very beginning of learning what and how to do things properly.

  Robert

  Hi Robert,.

  If you look at a picture of the 24 p video and compare to a frame of the video of 60 p, 60 p frame will look better. When people say 60 p is the best quality, it's because you get several images per second... not better executives... just more of them. But as we have already mentioned, it is useless in shooting 60 p If you send only 24 p. Frame rate conversion will affect the final quality!

  Just keep in mind that you need to adjust your style of shooting for the 24 p, which means no fast pans for example of what they will offer very rough.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Can I dual boot Win7 32 and Win7 64-bit by using the same product key?

  Hello

  My desktop PC is dual boot with XP and Win 7 Pro 32-bit. Both are retail box versions.

  I would replace the partition with Win 7 Pro 64-bit XP. (That I still keep installing Win 7 32 bit legacy hardware that does not work under a compatibility mode).

  Can I install and activate the new 64-bit partition by using the same product key, or is that 32-bit installation fail/break?

  Thanks for any advice.

  No, the key that can be used with 32-bit or 64-bit Windows 7 is exclusively for use with the disc 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  If you comply with these license terms, you have the rights below for each license you acquire.

  1 OVERVIEW.

  a. software. The software includes operating system software. This software does not include Windows Live services. Windows

  Live is a service available from Microsoft under a separate agreement.

  b. license model. The software is licensed on a basic computer copy. A computer is a physical hardware system with internal storage capable of running the software. A hardware partition or blade is considered be a separate computer.

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Where can I still get Windows 7?

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• Configuration of workflow for the Oracle Applications 12.1.1 Notifications

  Hi gurus,
  
  I have configured Workflow on Oracle Applications 12.1.1 shippers. I am able to get notifications by email for approvals, etc.
  The client now requires approve or reject requests by e-mail itself. How can achieve us?
  
  Thanks in advance!
  Khan.

  Please see (approve or reject not enabled in the Notification by Email [143274.1 ID] buttons).

  Thank you
  Hussein

• Assistant to office and Station Service showing details of the bad product

  As it says in the title SN shows that number of 000000 and part as a worm. 1.
  That are specific to distance. How can I change them? I tried to remove or recharge it a version update (each) with no joy.
  Any ideas?

  > As it is said in the SN watch as number of 000000 and part as a worm. 1.

  What serial number and the part number (model number?) do you mean exactly?
  Do you mean the laptop's serial and model number?

  These details are part of the DMI string.
  Usually after the motherboard exchange such DMI string must be updated with correct data.
  In case the DMI will be not updated, data such as serial number and others will not display correctly.

• WSD port for printers and TCP/IP ports monitor, what is the difference?

  There are a lot of discussions on IP etc. addresses for printer problems. There is no mention of a new feature for the port for printers, WSD port for plug-and-play printers, I assume that the IP addresses have no importance with WSD, my printer is vaguely configured for the WSD port and TCP/IP port, can someone please expain

  Here is a description I found

  The WSD Port Monitor is a new printer port monitor in Windows Vista and Windows Server 2008.  This port monitor supports printing on network devices that are designed to include Web Services for devices (WSD) technology.  Services Web for devices allows devices connected to the IP-based network announce their functionality and to provide these services to customers using the Web Services Protocol.  Clients and devices WSD communicate on the network using a series of SOAP (Simple Object Access Protocol) messages on UDP and HTTP (S).  WSD for devices offers a plug-and-play network experience that is similar to the installation of a USB device.  Services Web for devices also defines a security profile that can be extended to provide additional protection and authentication by using certificates based on the device.

  WSD is not a port, but a port monitor.  A port monitor looks at information from the TCP/IP port and makes routing or changes based on what happens in the port.

  This link has some in the description of the depth of the WSD port monitor:

  http://blogs.technet.com/b/askperf/archive/2008/02/11/WS2008-the-WSD-port-monitor.aspx

  Back to the comparison of the IP address as a P.O. box.  Once the letter arrives in the POST box, someone needs to come empty the box or letters are going no where.

  When the data comes in the TCP/IP port a port monitor is where I look for that to happen.  The WSD port monitor would take over this function from the standard TCP/IP port monitor.

• Access restriction configuration network devices with the level of the ACS 5.0 user

  Hi Experts,

  I have some configuration tasks TACAC with level of different user for all routers and switches,

  To further develop, I engineer, analyst and site engineers, so I want to configure centralized authentication with Annie tacac different levels for the various categories of network engg. Analyst, site engineer,

  can someone explain about how to proceed with ACS 5.2 and what configuration is required at the peripheral level.

  I'm particularly looking for the 5.2 acs configuration procedure.

  Looking forward to get the answer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/policy_mod.html#wp1076053

  In "default device admin" just create authorization rules.

  They should look like "If the user/group type = site engineer, then assign the shell profile X.

  You then define the profile of shell in the elements of policy and put in there all the privileges of your engineer to site.

  And so on for the other roles

• N2048 - VoIP QoS, data Ports and trunk Configurations

  Hi all

  I am new here and also new to work with the Dell Networking hardware. I just need to some insights into setting up a new network, that I put. We use 3 switches to N2048 for access to data and VoIP. Each port will have only have only a phone or a client PC in different VLANS.

  My question is what is the best configuration across all three powered to ensure that we have the optimum configuration for the quality of service for VoIP phones. Here is the configuration that I came up with this day.

  Global configuration

  VLAN, VoIP

  Voice port

  item in gi1/0/1 interface
  switchport mode access
  switchport access vlan 5
  VLAN 5 voices
  Voice vlan dot1p 5
  output

  Client port PC

  access mode swithport
  swithport access vlan 10

  Trunk Port

  Te1/0/1 interface
  switchport mode general
  VLAN allowed switchport General add 5,10,100
  switchport General pvid 100
  VLAN 5 voices
  output

  Thanks for the comments

  By default, the ports are configured to trust the priority of incoming user. So for your switch connections you can configure ports and trunk mode, there is no need to set general mode with VLANs voice, etc.

  switchport mode trunk

  switchport trunk allowed vlan add 5, 10, 100

  switchport trunk vlan 100 native

  For ease of deployment, I suggest to all the other general mode ports.

  switchport mode general

  VLAN allowed switchport General add 5,10

  pvid switchport General 10

  VLAN 5 voices

  With the general mode configuration, you can connect a client or a phone, or both at the same time, in a port. This will make things easy if later you decide to plug a phone in where a customer to reside.

• Backup and managing configurations on ONS 15454 devices

  We have a lot of ONS 15454 and CiscoWorks LMS 4 apparently does not support these devices (I can't pick the cards ML1000 configurations or configs of chassis).

  Can I save the configurations of the STC cards/chassis using the CTC? I see a backup option of database under maintenance contract, but I'm not entirely of this make. Basically, I want to assure you that if one of these devices suffers a hardware failure, I have backups of the way in which the circuits are provided.

  Is there a better tool to use?

  Any advice would be great

  For nodes to backup through the CTC, the Cisco ONS 15454 procedure Guides describe the steps to be taken to save the nodes (section below the latest version is:)

  Cisco Transport Manager is a management system of item available for the largest optical networks and has features to back up the databases of several nodes.

  =========

  NTP-A108 back up the database

  Goal	This procedure saves a backup version of the TCC2/TCC2P (software) database on the workstation running Cisco transport (CTC) controller or a network server.
  Tools/equipment	None
  Pre-trial proceedings	None
  Required / have required	Mandatory. Cisco recommends to perform a backup of database at intervals of about a week and before and after configuration changes.
  Onsite / remote	On-site or remotely
  Security level	Maintenance or higher

  

  Note You need to back up and restore the database for each node on a path of the circuit in order to maintain a complete circuit.

  

  Note The following settings are not backed up and restored: node name and Internet Inter - ORB Protocol (IIOP) port. If you change the name of the node and restore a backup of a database with a different node name, the circuits map to the new node name. Cisco recommends keeping a record of the old and new node names.

  Step 1 Complete the "DLP-A60 Log into CTC" task at the node that you want to back up. If you are already connected, go to step 2.

  Step 2 Click it maintenance > Database tabs.

  Step 3 Click on backup.

  Step 4 Save the database on the hard drive of the workstation or network storage. Use a file name with the extension of .db file. for example, database.db.

  Step 5 Click Save.

  Step 6 Click OK in the confirmation dialog box.

  Stop. You have completed this procedure.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• SGE2010 - traffic relay and DHCP configuration

  Hei

  We bought just a switch SGE2010 we want to use to replace the switches in the control panel of our office. So far I managed to access the switch and assigned a static ip.adress on our net, but I can't get to our entry point switch relay traffic. I have a test machine that is configured with a static IP as well and tried the ok sign, but as soon as I put the switch between traffic is not relayed.

  The idea was to use this switch as a DHCP as well. But I thought it would be a start to get at least the traffic relayed before starting the dhcp part.

  Only configuration settings I have done factory settings are the following: (note that the IP is slightly adjusted, but consistent for reasons of confidentiality)

  Configuration of the IP4

  1. Assigned to a static ip address: 95.59.69.148
  2. Assigned a subpattern: 255.255.255.192
  3. Assigned to a user-defined gateway: 95.59.69.129

  DNS configuration

  1. Assigned to an ip address dns address: active 95.59.0.100
  2. Assigned to a dns ip address: 95.59.0.200

  All these settings are the default settings that we use when we assign a server with a static ip address, so it is not a pick up of our filtration dhcp server. So my main question is why on earth isn't it relay traffic?

  In addition, we are interested to kill the former (with stones, I hope) dhcp server and dhcp on the sge2010 configuration. The current dhcp is an operating system. X dhcp server (Yes a mac) with the following configuration:

  • (Dynamic ip) subnet
    From ip: 95.59.69.179
    Ending ip: 95.59.69.190
    Subnet: 255.255.255.192
  • Router ip: 95.59.69.129
    Rental time: 3 hours
  • The range 95.59.69.130 to 95.59.69.149 we set up manually on the servers, hardware, etc.
  • DNS server: 95.59.0.100 & 95.59.0.200
    Default search domain: No. - dns - available.example.com
  • And then we have a group of static mappings to Mac-addresses
    ip address: 95.59.69.150
    IP: 95.59.69.178

  I tried to see in the configuration where I could the mappings static spesify range etc, but I can't say it got me anywhere. So my second question is how to install a server dhcp of Eric as a designated above?

  It's nice to finally convince the CEO to move the dhcp to a better metal, but it's not as nice having a hard time setting up. I would apprecitate every possible leeds and suggestions since I'm kinda stuck.

  Thanks in advance

  Rafn.R

  Hello

  My SGE2000P forwards DHCP requests on my DHCP server.

  I used my default VLAN1 as an interface routed to unicast request DHCP relay on my server (router ISR UC520) that resides on that VLAN 1.

  My interface Vlan 1 on my SGE2000P has an IP 192.168.10.254.

  My gateway address for potential hosts in VLAN 2 IP will be the ADDRESS IP I AI ASSIGNES to VLAN 2, because the PC or the IP hosts connected to VLAN2 will use IP VLAN2 interface as the gateway. It's just how it works!

  Hosts of PC on VLAN 2 need of a default route and they use the IP I assigned to VLAN2 as their next jump out VLAN2 on the real world.

  This address can be seen below.

  

  DHCP relay is enabled with the option 82

  

  I chose VLAN2 as an interface VLAN, as shown below.

  

  I have two ports not signposted in the VLAN2, and I joined an IP host to G1 so that I can test the DHCP relay.

  

  I get the following debug output from my dhcp server, so I know the relay is working.

  002624: 19:40:08.575 Dec 5: DHCPD: looking for expiry of the leases.

  002625: 19:40:58.408 Dec 5: DHCPD: DISCOVER notification to:

  002626: 19:40:58.408 Dec 5: DHCPD: htype 1 CHADRR 0025.84d8.d008

  002627: 19:40:58.408 Dec 5: DHCPD: id remote 020a0000c0a80a0101080001

  002628: 19:40:58.408 Dec 5: DHCPD: id circuit 00000000

  002629: 19:40:58.408 Dec 5: DHCPD: see if there is a specified internal pool class:

  But I must confess that I have opened a case on it with the Small Business Support Center, because I think I can see something wrong on my DHCP server debugging.

  But the key is that I see the router WAN/DHCP server, see the query from DHCP.

  The only way to the broadcast DHCP requests can get to the DHCP server, if the switch SGE2000P takes these DHCP broadcast requests and unicast these or relay to my server DHCP IP address 192.168.10.1.

  So in other words he tries to relay DHCP.

  I would ask you to please check the SGE2010 Administrator's guide because it clearly shows how to configure the DHCP on the SGE2010 relay.

  Even if the screen capture shows and the old version of the code below.  I have day my SGE2000P tonight at the generally available (GA) version of the code.

  

  Just outa interest, if you telnet to the switch, is your mode of layer 3 or Layer 2 switch.

  I can also say from your screenshot that your uplink ports are in overlay mode.

  Maybe if you don't use stacking, you can set your switch to the layer 3 mode and standalone mode

  Best regards, Dave

• Property ID intellectual VACL and mls CONFIGURATION ON IDSM2

  Hello

  We have installed an IDSM2 6500 Series switch. We have configured 5 amendments. of the VLAN. We have activated the firewall IOS on 2 numbers. of the VLAN.

  Now, we want to capture logs on the IDSM2 for all the VLANS.

  How can I set this up.

  I have to ask the vlan VACL where the IOS Firewall is not enabled.

  Two VLANS I use parIP mls ID that we apply ip inspect on the two VLANs.

  Is is possible to set the port 7 and 8 of the IDSM2 to caputure of log VACL, and mls IP IDS.

  Kind regards

  Jousset

  I think it should work.

  You may want to consider another approach as well.

  Instead of placing the command ID of mls ip on the server vlan interfacem router, you might try just adding extra snap lines for the VACL on the vlan client to capture this traffic.

  For example, if your servers are web servers and the client VLAN is the 10.1.0.0 network your vacl might look like this:

  permit tcp 10.1.0.0 capture any eq 80 0.0.255.255

  permit tcp any eq 80 10.1.0.0 0.0.255.255 captures

  allow an ip

  The first line will mark the client packages for the capture.

  The second line will mark the server to capture packets.

  The last line allows the rest of the traffic without being captured.

  In this way capture you both sides of the traffic in a VACL instead of having to combine VACL and mls IP IDS.

  The JOINT-2 would still need to monitor all the VLAN server and client.

  Because although the VACL applied on the vlan client, it will mark some of the packages for capture when they leave the switch on the server vlan.

  Maco

• How to configure Apache to send the queries based on the domain name to the forms, www and Servlet directory?

  Hello

  I installed Oracle Forms 11.1.2.1.0 on a Linux server.

  This server will run a Forms application, a web site and a Servlet for a couple of unique clients.

  Each client accesses its own applications through its own domain name.

  For ex:

  http://Customer1.mydomain.com/forms/frmservlet?config=CUSTOMER1 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer1.mydomain.com/www -> Directory access... local/htdocs/customer1/www

  http://Customer1.mydomain.com/myservlet -> Weblogic 7101 port forwarding. This a new server created in the field of Weblogic to run Servlet. Each Servlet will be deployed with a specific context by customer: myservlet/customer1 /

  http://Customer2.mydomain.com/forms/frmservlet?config=CUSTOMER2 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer2.mydomain.com/www -> Directory access... local/htdocs/customer2/www

  http://Customer2.mydomain.com/myservlet -> Port forwarding Weblogic 7101 with PathPrepend: myservlet/customer2 /

  My idea is to configure the Apache Server using 1 VirtualHost by customer:

  < VirtualHost *: 80 >

  ServerName customer1.mydomain.com

  ServerAlias *. Customer1.mydomain.com

  DocumentRoot "/ u01/app/fmw/asinst_1/config/OHS/ohs1/htdocs/customer1/www.

  < /myservlet location >

  SetHandler weblogic-Manager

  WebLogicHost myhost

  7101 WebLogicPort

  PathPrepend /customer1

  < / location >

  < / VirtualHost >

  Is this a good approach?

  Can I place block < location > < VirtualHost > block?

  From what I've read on the web, it is the common way to request proxy based on URL.

  My first tests raised an error like: CONFIG_ERROR [line ap_proxy.cpp 1735]: 'WebLogicCluster' or 'WebLogicHost' specified in the parameters of

  That's why I wrote this question.

  Further more, can I add a specific redirect for forms inside the VirtualHost customer who will redirect

  http://Customer1.mydomain.com/forms -> Redirect to Weblogic Port 9001 (Forms) adding /frmservlet? config = CUSTOMER1 you URL?

  Thanks in advance.

  Your approach is correct, but there are a few details that need tweaking. Can take place inside VirtualHost. Have you enabled ability to host virtual by uncommentNameVirtualHost *:80 in httpd.conf?