portable hard drive error message

Similar Questions

• hard drive error message 1

  Whenever I turn on my laptop, a message appears that there is a problem with my hard drive.  I have prees F2 to get the Diagnostics utility and run the hard drive test. When I do I get this message

  hard drive error

  Failure ID: 90 c 633-6am70r-mfgk0k - 60 c 203

  Product ID: c2n26ua #aba

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• HARD drive error message appears on my Satellite C

  I received the following message a week ago, it says error on the controller on hardisk1.
  Any solution please?

  Your HARD drive is SMART failure to predict who monitors the HARD drive, operating status.
  Your HARD drive is facing a problem and CHIP controlling the software predicts that the HARD drive will fail.

  Toshiba strongly recommends that you create a backup for the data on your HARD drive.
  Contact an authorized service provider to check your drive and buy a new drive for replacement if necessary.

  Hello

  I think the message says it all:
  The HARD drive fitness was checked and it looks like some problems were detected

  I recommend to save important data in case the HARD drive was going to die, you could restore again to leave another HARD drive, disk or flash memory

• P7-1234 HP and hard drive error messages.

  Given that my computer was new, the hard drive has the crazy a faint sound of squeaking. The noise became louder place about 3 months ago and I get error messages. I have attatched pictures and a video of the noise. Then, about 2 weeks ago there was a power surge, and since then I've been do a "disk hard dectected or does not" message and a message telling me to check the cables. I check all the connections of the hard drive and disk and everything were ok. Since the surge, the computer is extremely slow, and the cpu load is between 60 and 100 on the first nucleus. carrots in second and third are ok and there is no response from base 4 (without load), and only 3 central units show on the windows Device Manager. I also took several photos with a thermal imaging camera and several components are hot in my opinion way (117-159 * f). Any ideas?

  https://www.YouTube.com/watch?v=bvFwmiaaPMw&feature=youtu.be

  Hello @herrmant,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your hard drive still makes a grinding noise, but you are not getting any errors after a power surge indicating that the hard drive is not detected and are looking for help. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Replaced the hard drive, error message: Windows 7 is not genuine.

  Original title: counterfeit

  I put my hard drive in my new computer in my old laptop and he said now my Microsoft windows is counterfeit do - what I do?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If Windows 7 came out initially with your old hard drive, you can proceed as follows;

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• criitical hard drive error message

  All of a sudden my computer doesn't work well and repeatedly shows a message - critical error of hard disk and asks me to buy the advanced recovery of windows recovery module

  You fake / rogue software by the sounds of it. Get malwarebytes to day then do a full scan . First turn off System Restore

• Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

  Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

  Hello

  ·        Since when are you facing this problem?

  ·        What are the fix and repair that you tried to solve this problem?

  ·        Outside this disk verification error, do you get any other error message?

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  ·        Click on continue or provide administrator credentials if prompted.

  ·        In the command prompt window, type the following text, and then press ENTER:

  ·        sfc/scannow

  ·        You should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  ·        % Of verification complete.

  ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3:

  I suggest you to do a system restore. Follow the steps mentioned in the article below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• need a driver software for i/o Magic GigaBank first 80 Portable hard drive

  I/o Magic GigaBank first 80 Portable hard drive is not detected, does anyone have any suggestions?

  Hello

  1. were you able to use this hard drive without any problem before?
  2. don't you make changes on the computer before this problem?
  3. what exactly happens when you connect this HDD? You get the error message?
  4. have you plugged this hard drive via the USB port?
  5. are you able to use other USB devices?

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also:
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

• A toshiba canvio 1 TB external portable hard drive can be formatted in FAT32?

  I have a bought a toshiba canvio 1 TB external portable hard drive so you can use it to watch all my TV shows and movies and of course store them all. I plugged in my DVD player and it cannot read the device. It is formatted in NTFS and I know that this format does not work on my DVD player on a USB key, I got so I tried to format my hard drive in FAT32 so I can use it for what I wanted.

  I tried to create a small partition, but I find I don't get the option to select FAT32, EXFAT only (I don't know what it is) and NTFS.

  Can someone please?

  Hello

  (1) what happens when you try to format it in FAT32?
  (2) you receive error message when trying to get in shape?
   
  See the below link that can help you in the matter of fixing.
  Convert a hard disk or partition to FAT32 format
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-FAT32-format?SignedIn=1
  Hope this information helps.

• How to use Ready Boost, and what are the requirements for the use of portable hard drives and flash drives for use with Ready Boost?

  I have Windows 7 64 bit Ultimate Edition and try to get Ready Boost to work on my PC using portable hard drives or flash drives. I have 2 portable hard drives (iomega 120gig, Seagate 250gig) and a 8gig sandisk cruzer flash drive. All this deterioration when you try to use the ready boost said that these discs only are not compatible or not supported. So what do I need?

  Not all readers will work with ReadyBoost. There are some readers who actually will specify that they are capable of ReadyBoost.

  By WikiPedia:

  • The device should have an access time of 1ms or less.
  • The device must be capable of 2.5 MB/s for 4 KB random read speeds indicates the spread uniformly across the entire device and 1.75 MB/s write for 512 speed random writes spread uniformly across the device.

  You must also put the device and let it plugged in for ReadyBoost. ReadyBoost is therefore best suited for a small thumbdrive (up to 4 GB) that greater thumbdrive or external HD that you would probably be disconnect from time to time.

  Open solutions Explorer window, find your Cruzer - right-click on it and click Properties. If there is a ReadyBoost tab, you can set up - set it to dedicate this device to ReadyBoost. It will be implemented and save a file on the USB key. Click Apply and're you good to go.

  A caveat which I can testify first-hand. Apparently while booting, Win 7 has trouble with some USB key - it will search the thumbdrive, the operating system, the process of starting to stall and you say: ' Missing Operating System ' - Fortunately the solution is very easy. Shut down the computer, remove the USB key, restart the computer and it will start normally. I had this happen with a 8 GB Cruzer. This seems to be a random thing, because I had the Cruzer plugged in and booted several times without encountering the error of missing operating system message. No idea why or why it is injury. Currently, I use a Kodak USB 2 gig key that seems to work very well.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• HP Pavilion DV6 3120 to hard drive error

  Hello

  I have HP Pavilion DV6 3120 is, product # LE529EA #ABV. Whenever I start it goes to blackscreen with 'Smart HD error found imminent failure. I hope you guys could give me a link for the hard drive just so I can replace it. Thank you

  SATA 2.5 portable hard drive "

  6.35 cm (2.5 in) hard drives (HD), 12.7 mm (. 50-in), is supported by the hard drives and 9.5 mm (. 37 - in)
  thicknesses
  Supports a hard drive
  Supports readers of the solid state (SSD)

  NewEgg.com and other online sellers will have what you need.  My preference is OCZTechnology, Samsung EVO and Sandisk SSD for performance incredible disk access.,.

• New external USB 500 GB Portable Hard Drive appearing is not in Windows Vista

  I connected a new 500G portable hard drive to a front USB port on my HP PC (with an AMD Phenom X 4 image processor), under Windows Vista Home Premium. Windows presented a pop saying that the driver has been installed, then he said: USB device installed. The software of the device has been installed successfully and is ready for use.

  However when I looked for the drive in Windows Explorer it wasn't there. I read in this forum, and using the information that I realized that I accessed the computer on my PC management - up it only shows C: drive and D: drive image factory, but below that, when disk 0 is assigned to the C: and D: drives it shows disk 1, unknown, uninitialized. Assuming that it is the car in question, I tried to initialize the disk, but then the error FUNCTION INCORRECTE.

  I don't know what to do at this point. If the player has not been assigned a letter, there seems to be no way to transfer or partition.

  A new drive must be formatted. That is why it is sjowing up as disc 1, unknown, uninitialized.