Portal of comments in a distributed installation

Similar Questions

• IAAS distributed Installation

  Hello people,

  Our loose in a production environment and rwe are considering HA is an important aspect here. I have read through the docs of reference etc. architecture and has been able to put a bet in bulk, bulk DB and vRO. When it comes to IAAS components, I'm a bit confused.

  Here's what I predicted right now...

  1 VIP for the entire stack of IAAS component

  2 knots with all IAAS components installed in each of them

  1 remote SQL DB that gets contacted 2 nodes above.

  Is this a good approach or should I separate with 2 VIP and 4 nodes, a set for service Web IAAS and other together for service IAAS Bishop?

  Simply put, we are looking for 1 VIP and 2 knots with all IAAS components in each of these 2 nodes. Please suggest how I can achieve this. Appreciate your answers.

  Kind regards

  VMSavvy

  The distributed installation is more availability for scale. As Steve noted, the Manager is active/passive and requires a failover of the interactive.

  Availability is an interesting topic... which I spend a lot of time discussing rather vigorously with lots of people. Availability is all about moving your congestion point somewhere else. In this case, it's going to be your SQL Server (that you indicated that there is only one of). Similarly, are your highly available books? You did not mention the vRA device, which, if clustered needs an instance external postgres. Of course, you want both of them as well...

  Once you have passed the vRA management components, we start getting into the availability of endpoint.

  You see where I'm going here right?

  TLDR version: identify your availability requirements and if you can hit with VMware HA then not to complicate your environment.

  Grant

• I just buy Acrobat DC pro, I have a mac 10.7.5 version comment I do pour Installer compatible version? Thank you

  I just buy Acrobat DC pro, I have a mac 10.7.5 version comment I do pour Installer compatible version? Thank you

  Hi John-yvesh52462792.

  Acrobat CC is not compatible with Mac OS 10.7.5, make sure you check the system requirements before purchasing system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC.

  Only the option to use Acrobat DC is upgraded Tower Mac OS.

  Kind regards

  Nicos

• Endpoints of IaaS host in the vCO under a Distributed Installation vCAC

  I have a question about the possible configurations of a system of vCAC under a "distribured facility", as shown in this part of the "Installation and Configuration" document .

  
  

  My question is if there would always be a case where an instance of vCO would have more than one end point "vCAC Infrastructure Administration"?  I'm trying to understand the architecture of this distributed installation and whether or not it has implications for this issue.  At this point, it seems to me he's still only going to be a unique IaaS associated with an instance given vCAC. I understand that there may be several IaaS components, but the scheme suggests that the load balancer creates a single point of entry, it would involve a single end point in the vCO.

  
  

  Details of welcome points.
  

  Yes that's correct.  When you add an endpoint IaaS to vCO as long as you use the name of the load balancer to have it then just that.  Yes same also distributed all IaaS components (MGR or Web) would be grouped together behind that load balanced name, so even if you had the IaaS web component installed on 5 VM they would all be behind that load balanced name.

• vCAC 6.0 Distributed Installation and local PostgreSQL DB?

  I'm more the vCAC 6.0 for the distributed installation documentation and it is not clear on the conditions of implementation for vCAC clustered devices and their databases.

  If you install multiple vCAC devices and set up as a cluster, it is recommended that configure you an external cluster of PostgreSQL "for high availability and failover", but it does not say whether or not it is necessary.

  Is it possible to configure a cluster vCAC environment without using an external PostgreSQL cluster, or is it a requirement of this configuration?

  I understand.

  In the documentation here:

  vCloud Documentation Center Automation

  By default, it says "the vCloud Automation Center device is configured to use an embedded PostgreSQL database. For highavailability and the large deployments, an external database is required. »

  In the architecture section distributed:

  vCloud Documentation Center Automation

  They show that a deployment of high availability of the vCloud Automation Center device consists of two or more.

  I would take these statements as meaning that no, you can not set a vACA clustered deployment using the internal postgreSQL and you are required to use an external instance of postgreSQL when configuring the vACA in a redundant deployment.

  I have not tested in the laboratory yet but will follow up to this post when I do.

• Comment to build an Installer (setup.exe)

  Hi all

  Forum of this I am new in and I just finished my studies also lol.

  I have a big project in labview with hundreds of VI.

  I'd like to know comments create an installer to make my sweet distributable?

  Basically, have a setup.exe icon which allows you install my sweet on any same PC not equipped with the LabView IDE...

  Hello

  There is a section EN it's better if you post available in French.

  Otherwise your exe once built.

  In build sheet, right-click New-online Installer

  its a window or you Pourrat Configurator your installer that will do what you want

  take the time to read what is asked and put the source files in the right place.

  A +.

• vCloud vCAC Automation unit distributed Installation Architecture Center second device does not record services

  I work at the vCAC 6.0 installation in a distributed architecture for a production environment.  I have deployed the device of the identity, configuration Netscaler for balancing the load, configure external postgreSQL, followed vCloud Automation Center Documentation until you restart the vcac-server the vcac appliance second service and it never starts or registers the services on the second device vcac.

  The first aircraft arrives as it should and works through the just right load balancer.  After restarting the service vcac-server and 20 minute wait I can't to the second application directly bypassing the load balancer to access the page of the shell-ui-app.  Connect to the console of the second application I tail'ed the output of /var/log/vcac/catalina.out and used netstat - year to view the ports used.  Port 443 just never came up.

  I have filed a ticket with support but thought someone might have fallen on this and can help in the meantime.

  The problem has been resolved with the GA vCAC 6.1 version and using the HA tab for additional devices.

• Comment LR6 on windows10 Installer?

  I can't Setup LR6.

  I routinely the following error message: "inconsistency in the database of the program installation...". »

  0 error in the summary file of errors... It's Super frustrating!

  Thanks for your help

  Hi Gregorym2274806,

  Please consult about it, where a similar problem has been addressed:

  Inconsistency in the database of the installer. Please restart your computer and reinstall?

  Let us know if that helps.

• IaaS distributed installation error every time that the server 2012R2

  I've tried literally all on google and even some things that not relate when you try to resolve this problem... but basically install fails to half way through and this is the part of newspaper where starts the error: someone has any ideas? There are no firewall anywhere.  The database is created on the server whenever I run the present.  Each pre - req is installed, everything appears in the auditor of pre - req.

  News: 2015-02-09 02 50 13 182 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" MoveRegistrationDataToDB - file name "C:\Program Files (x 86) \VMware\vCAC\Server\Model" s "dbvraiaasprd" d "vcac" - v

  News: 2015-02-09 02 50 17 385 PM: command completed successfully.

  News: 2015-02-09 02 50 17 PM 401: registration with the service catalog

  News: 2015-02-09 02 50 17 PM 401: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InitializeRepo Target.

  News: 2015-02-09 02 50 17 PM 401: build succeeded.

  News: 2015-02-09 02 50 17 PM 401: 0 warning (s)

  News: 2015-02-09 02 50 17 PM 401: error (s) 0

  News: 2015-02-09 02 50 17 PM 401: time 00:00:27.36

  News: 2015-02-09 02 50 17 416 PM: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml" /t:InstallRepoModel /p:RepoUtilDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data '; AssemblyDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data" /p:DBServer = "dbvraiaasprd"; DBName = 'vcac"/p:DBConnectParam =" "/p:InstallType = 'Install'"

  News: 2015-02-09 02 50 17 432 PM: version of Microsoft (R) Build Engine 4.0.30319.34209

  News: 2015-02-09 02 50 17 432 PM: [Microsoft .NET Framework, version 4.0.30319.34209]

  News: 2015-02-09 02 50 17 432 PM: Copyright (C) Microsoft Corporation. All rights reserved.

  News: 2015-02-09 02 50 17 PM 448: Build started on 09/02/2015 14:50:17.

  News: 2015-02-09 02 50 17 463 PM: project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml "on node 1 (Target InstallRepoModel.

  News: 2015-02-09 02 50 17 463 PM: InstallRepoModel:

  News: 2015-02-09 02 50 17 463 PM: #InstallRepoModel # install repository models

  News: 2015-02-09 02 50 17 PM 479: "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe" Assembly-SqlInstall - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Common.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.External.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Licensing.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.Common.dll. , "C:\Program Files (x 86) (x 86) \VMware\vCAC\Server\Model \VMware\vCAC\Server\Model" s - dbvraiaasprd d 'vcac' - crush - v

  News: 2015-02-09 02 50 33 089 PM: command completed.

  News: 2015-02-09 02 50 34 729 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" model-Install - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll" s "dbvraiaasprd" d "vcac" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v

  News: 2015-02-09 02 51 42 513 PM: System.Net.WebException: the underlying connection was closed: the connection was closed unexpectedly.

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.BatchSaveResult.BatchRequest)

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)

  News: 2015-02-09 02 51 42 513 PM: Warning: return nonzero code. The command failed.

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 559 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.

  News: 2015-02-09 02 51 42 559 PM: Build FAILED.

  News: 2015-02-09 02 51 42 559 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->

  News: 2015-02-09 02 51 42 559 PM:(InstallRepoModel target)-->

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 PM 591: 0 warning (s)

  News: 2015-02-09 02 51 42 PM 591: 1 error (s)

  News: 2015-02-09 02 51 42 591 PM: time 00:01:25.12

  For all of you who read this, I was able to solve the problem.

  Through all the blogs I read, I did sort of a stupid Setup 4.5.2 on server 2012R2 error.  DON'T, DON'T.

  To uninstall the 4.5.2 version of server 2012R2 if you install like I did, go to programs and features, switch view installed updates and remove the update for Windows KB2934520

  After doing this, I was able to smooth sailing through the installation.  I realized that halfway through my troubleshooting, but considering the compatibility of .net usually I don't think it would be a huge problem and I though that surely there would be a vmware KB on such a stupid mistake but apparently not.

• Boot a order a distributed installation?

  Y at - it no KBs officials that show the correct start of a distributed infrastructure vCAC order?

  I just checked with the fountain of knowledge VMware sat next to me and there is apparently no official KB for this.

  The answer varies depending on the version to a certain extent. The order recommended for vCAC is:

  1. service active Directory

  2. primary SSO

  3. secondary SSO

  4 MS SQL

  5 external DB PostgreSQL (by v6.0.x)

  6 primary vCAC device (for v6.1 + which assumes that the PostgreSQL DB internal is used and is the master)

  7 secondary vCAC device (for v6.1 + which means that the internal PostgreSQL DB is used and it is the slave)

  8 servers Web IaaS (they are active / active)

  9 IaaS Manager server (active)

  10 IaaS Manager server (standby - of course, the Manager service itself is not start)

  11 DEMs (in any order)

  12. agents (in any order)

  The order of the components of Windows should not matter too much, and of course the foregoing assumes that MSSQL and the Postgres DB for vCAC devices are toward the top.

• Comment in folio distribute a kiosk?

  Hello

  Who you the procedure to follow pour distribute a folio on a kiosk or there is a nice tutorial.

  It is possible the folio to be downloadable from a website, IE without going through a kiosk.

  Thanking you in advance

  Ulysses

  Here's our guide edition which runs all step by step: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf

  Request price information fill out the form at: http://apps.enterprise.adobe.com/go/701a0000002IhGxAAK?promoid=KKSDJ

  Neil

• Essbase 11.1.2.1 in distributed installation problems

  Hello
  
  I have installed and configured the EPM 11.1.2.1 system in 2 machines:
  
  Server 1: Foundation Services, planning, HPS, Reporting and analysis, calculation Manager, Essbase administration Services, EAS Console
  Server 2: Services Foundation, Essbase Server
  
  Services are running so far. I don't a not restart the essbase server machine still because I struggled in the previous installation and could not start all over again... but I reinstalled and configured everything and it works, the service is in place and Essbase.exe is running.
  
  I plugged in the Regional service Console, however, you press Add Essbase-Essbase servers on server and I had 2 nodes: EssbaseCluster-1 and < server2hostname >: 1423. I choose the 2nd option and tried to connect and I couldn't. The connection timed out waiting for Essbase Agent, so I went back to Server 2 and run tool Diagnostics EMP, which gave me the following error message:
  
  Validation using the MaxL Essbase server startup
  Error: Essbase server was not correctly outsourced.
  Recommended action: check Essbase server is started.
  
  I don't know what I have to do. I have no error during installation or configuration, or at least not a visible. Need some advice how to troubleshoot and resolve the problem.
  
  Thank you

  If you can connect and configure the essbase users through shared services then you should be fine.
  It is common to see the name of the cluster in shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• OWB 10 g 2 distributed Installation

  Hello!
  
  I need to install OWB on a Linux server. The point is that the target database is in another box, also hosted on Linux, in a RAC server active.
  
  Do I need to install the OWB binaries on the server Oracle RAC?
  As far as I know, it is not mandatory. All I have to do is create the repository on the target database remotely, and once I need to start the service control Centre, I want to emphasize to the target database.
  
  We have two different standards (development and Production). I know that only Rep would be enough, but our clients want two different repositories.
  How this scenario will affect the behavior of control center?
  Is it mandatory to start/stop the Service control centre to switch between development and production repositories?
  Everything else about this type of installation?
  
  Thank you!

  Hi Marcos,

  for scenarios 1 and 2, it is not necessary to install the files on your production server binary owb. Simply ensure that the control center service (which connects to the repositoy prod) rotating during a deployment. It is not necessary for the performance of mappings.

  Even if no binary owb are on the server, there is a database of job (created during installation of the repository) who tries to start the service control center on the db host. Of course, he fails and creates a few mistakes that can confuse your DBA. But no harm is done. You can manually disable db work.

  Kind regards
  Carsten.

• Comments ISE self-provisioning Portal

  Hello

  I get the portal page comments and my credentails authenticate correctly and the device is authenticated using MAB. Then I redirect to the portal and get this message

  This device has not been saved

  You must manually configure your device

  Configuration of your device is not supported by the Installation Wizard

  Device ID< mac="" of="" my="" windows="" xp="">

  No idea how to enable self-registration for guests?

  My goal is when comments is authenticated first time must enter information identification and registered MAC address, then when comments come again, it will spend only authentication without MAC address registration.

  Thank you

  Please see the attachment,

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.