Portal Smart Link

Similar Questions

• Issue backup Smart Link

  I have a small business RV042 router.  I have the Dual WAN setup Smart Link Backup mode.

  WAN1 is configured with a DNS servers for ISP 1 and the specified static IP address.

  WAN2 is configured to 2 PSI with a dynamic IP Addess (obtain an IP address automatically) with no DNS information is entered.

  If I unplug the cable to WAN1 router fine WAN2.  The problem I have is that DNS fails on all my computers until the cable to WAN1 is reconnected.  If when the WAN1 is disconnected, I do an ipconfig/release then ipconfig / renew on my computers, the DNS lookups so fine function.  If I plug the cable in to WAN1 I still do ipconfig/release then ipconfig / renew on my computers again have DNS function correctly.

  Any ideas on how this can be corrected?

  Static DNS servers can be specified to the DHCP > Setup page. The configured DNS servers thus will take precedence over the DNS servers provided by your ISP, when WAN links go live.

• What scales smart link to health app?

  Ready to buy a smart scale. Those of you who will link the health iOS app?  Elle, Garmin, Fitbit, etc...

  According to technical data sheets:

  http://www.Apple.com/shop/product/HB930ZM/B/Withings-smart-body-Analyzer

  Withings seems to be advertising that they support health app directly, while others maybe not so much.

  Fitbit, according to other customers didn't seem to do this, but rather integrates with their own fitbit approx. Garmin is the same.

  Essentially, what I see is that if the company made an effort to integrate health of Apple app, they put themselves in the apple.com store inventory.

• Smart Link backup VPN (RV042)

  I have the router RV042 at the regional office in Smart Backup link with 2 ISP mode. Is it possible to switch the VPN Tunnel automatically to secondary, when WAN router turned on at WAN side?

  Thanks for the cooperation

  VPN backup feature you requested is currently supported by RV082, not RV042.

• backup smart link does not not in RV042

  I'm in the mess I have configured RV042 in backup of secruit BI (primary/secondary links), but the question is when primary folds secondary does not gets to the top. for this I hv to remove manually main link only the cable then secondary stand... Vica-versa.

  I bought this router for auto backups but if I hv to display manually the same I was mistaken.

  is thr any soluton for that.

  NET detection, I chose the HOST ip. that is my server ip address.

  Pls help me guys. I can provide more details if necessary.

  Hi, paritly problem solved when smone told me to delete connection in Setup...

• Conflict with the multimedia link and phone via USB Portal

  Connect my laptop via a USB cable to use portal to phone via the USB port, the application Media Link automatically launches and passes the USB of Motorola Phone Portal parameter to USB Mass Storage. Any way to disable this?

  If I put USB return later phone portal, media link will just force to USB Mass Storage again. Very annoying...

  Nevermind - find the option in MotoHelper.

• Link portal to the HCM Dashboard

  Does anyone know how to put in place a CREF portal to link to a dashboard (for example the Dashboard Manager) HCM?  Documentation I've found is based on the use of unified Navigation which we have not activated.

  Without unified nav, then clone you the dashboard. Cloning, it means that create you a CREF just like her, but in the portal. Clone the CREF so pagelet. In the register of Portal Portal (Interaction Hub), for each pagelet, set the name of the NŒUD to HRMS.

  You can insert these ARB in project in HRMS and then copy the Interaction Hub project. If you take this approach, also copy the parent folders. For the home page tab, copy the folder of tabs. To the pagelets, copy the parent folder and the folder Pagelets. When you perform a comparison and a report, these elements will be displayed as no change. Copy them anyway. What this will do, it is updated the cache of Portal register so your new articles will appear. If you choose not to copy these elements, then you have two options:

  1. empty the cache server app and the web

  2 open the folder parent ARB in portal (after copying) and change the description. This also update the cache and load the new arrivals for children.

• How can I add a link to a Pages document I want to export to PDF?

  I want to add links to various web sites in a Pages 5.6.2 document (2573) I export and publish to PDF on my web site. How to go about creating a hyperlink in this version of Pages?  the old version of Pages contained an "Inspector" who allowed me to easily link the document to any web site. It also allowed me to insert the needed pages in my document. Now he just give me 'Section' leaves as if I complex page layouts instead of writing fiction (mysteries). I use a MAC Mini (purchased before 2013) computer with 500 megabits of memory and plenty of ram. My hard drive is 1.5 gigabites. My IOS is Yosemite 8.6.2.

  Hi twa.

  Menu > edit > Sustitutions > tick Smart links.

  

  Type or paste a link.

  Press ENTER to create the link.

  Print or export to PDF.

  Kind regards

  Ian.

• 'Add the link"greyed out

  Can someone tell me why the command "add a link" page is grayed out for me? I also tried cmd + K, but it does not work.

  I use version 5.6.2 on Mac OS X El Capitan 10.11.4.

  Thank you.

  

  Hi Spartacles,

  With this setting in the Menu > edit > Substitutions > Smart Links

  

  When you type something that is a valid email (in this example [email protected]) or a web URL, press ENTER, and it will automatically become an active link.

  With this setting disabled (in this example [email protected]), you must first select the link, then add a link will work.

  

  

  

  Click a link once to change:

  

  Kind regards

  Ian.

• 47L 6453 Smart TV apps are gone

  This morning my 47L 6453 told me it was an update to do. I allowed him to do so.

  When it is started to my smart TV top had no applications, boxes, icons or anything like that. I have my user name on top, the strength of wifi, the date and time. and at the bottom I get weather, media guide, settings, etc. I have nothing in the middle.

  I have reset the TV still does not. I turned off and pressed the button to watch on the TV for a minute, then he started upward - no joy. I did this, and then reset the TV - no joy.

  Toshiba support do not have an idea how to solve this problem, it was before the update, so it is clearly the update.

  Someone else has an idea. This isn't the ports because they were very good and I get a wifi connection and can connect to my account. just no applications on the smart display

  The TV connects to the portal Smart Cloud service that is running on external servers. There is nothing wrong with your TV, but the content of Toshiba TV of cloud and apps differs from one country to another and may change or end without notice.

• Smart Call function

  Hello
  
  I have a few questions about Oracle CRM on D (Release15).
  
  I'm trying to appear smart calling feature.
  Now, I could see this feature on "Page Layout layout of Task (Appointment) management".
  And I put a few settings to appear smart calling.
  
  So, I was able to see smart call function on create page "appointment."
  There is an Internet call smart link and it is crickable.
  
  After my crick, there is an error messege, "access is denied. (SBL-DAT-00553) »
  So, I checked the settings of some roles and access profiles
  but I couldn't found the element to set the smart call feature.
  
  I'm sorry for my bad English. Please help me.
  
  ==
  Question1,
  Can smart function use only call on the life sciences edition?
  
  Question2,
  Please tell me how to view and create models of smart appeal.
  ==
  Thank you.
  
  Yusuke

  Hello

  Support you is just Smart buying option is available in Life Sciences Edition only. But you can check with Support to see if they can allow for your instance of OnDemand

  Once you get it activated, you can place the "Calls" applet under so-called 'account '. Go and create a call and after save in the call details page, you would get an option to save the call as a model for later use / faulty information

  It may be useful

  -John CRMIT

• How can I remove the hyperlink in an email address?

  I want the address of all show as text, not a hyperlink.  Everything that I was able to find references the old Pages, how can I do it in Pages 5.6.1?

  TIA,

  Debbie

  Valve control-click or two fingers on the selected e-mail address and on the context menu pop-up, select the link Edit. Displays the linker, and you can click on delete. You can also select the email address, press command + K and then click on remove.

  If you want that all the news of hyperlinks to appear as plain text, as you type, you can all first, select Edit menu: Substitutions: (uncheck) Smart Links.

  Don't ignore the menu help Pages: Help Pages. Here's what he has to offer on the adding and removing of hyperlinks:

  

• Complete Pack of drivers for HP Pavilion g6-2379er with Windows 7 on board

  Hello

  I recently bought the HP Pavilion g6-2379er. Initially, he had no OS, no drivers in the package. So I installed Windows 7, but it appeared that there are no drivers for Windows 7 on your website. Is it possible to use Windows8 drivers for Windows 7? Will there be conflict? If there's place, is there a specific directory or an Internet link to the help that I can download complete drivers pack, applicable to my machine, sutable for Windows 7?

  Ahh. Indeed.

  I forgot on the cheaper option. Of course, the downside of that is that you are now facing... Where do you find a Windows operating system that you like and all the drivers?

  The simplest solution would be to install Windows 8, since all drivers necessary are on HP web support portal I linked in the previous post.

  Usually a laptop with switchable graphics has the amount shown on the box somewhere. Don't count on that being the case, since it is a premium option.

• Add a static route to a RV042

  I have configured the RV042 dual WAN port for backup smart link connected to two different ISPS.  The subnet behind this is 192.168.2.xxx.  I have a second router linksys Garland with the 192.168.2.250 WAN port and subnet behind it is 192.168.20.xxx.  My problem is that I have a not able to route traffic fron 192.168.2.xxx to 192.168.20.xxx.  How can I add a static route so that clients on 192.168.2.xxx can access resources on 192.168.20.xxx?

  1. the second Linksys router must be changed of gateway (active NAT) in router mode (NAT disabled) mode. With NAT the LAN behind the second Linksys will be not accessible from the outside unless you configure port forwarding.

  2. on the RV042 set up a static route for the subnet 192.168.20.0/255.255.255.0 to the gateway IP address 1921.68.2.250 on the LAN interface.

  3. Ideally, you must configure the same static route on all clients connected to the RV042. If you don't want to do this, you must configure the firewall on all clients on the RV042 accept ICMP redirect messages. This is important because otherwise all traffic from 192.168.2. * to * 192.168.20 would be sent to the RV042 and from there to the second Linksys that is unnecessary and could create a bottleneck.

• need smartlink usb 56 k fax modem x 64 driver

  I can't seem to find the chipset driver official smart link for my vista x 64 has the box of the modem:

  MOGE56002

  USB 2.0 fax modem external 56K v.92/v.90

  Power data 2009250032

  SmartLink chipset

  V.90/V.92 ITU; 115.2Kps DTE baud rate

  Full-duplex 56/data/fax

  ITU v4.2 and correction of data errors MNp2-4

  V4.2 bit and MNP5 data compression protocol

  Strengthened to the set command

  However, the CD drive is not available

  Hello
  
  Given that Smartlink ceased support for their products, and there is no driver available for this product.
  http://www.Modemsite.com/56k/SmartLink.asp
  http://www.Modemsite.com/56k/premiumc.asp
   
  However you try to search on the World Wide Web using your search engine favorite drivers.
   
  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.