Portege 3440 w2k update: pilot video pb

Similar Questions

• Portege 3440 - cannot install Windows 2000

  Hello friends :)

  I have a problem with the installation of Windows 2000 on Portege 3440.
  I was running Windows 2000 with the FDD USBB (with driver for PCMCIA of CD-ROM) installation and CD-ROM PCMCIA. "Everything was ok at the moment when I came for winnt ' q.

  When installing without partition on the HARD drive was appeared on blue background information: "could not find a place for a swap file. With partition (FAT32, 6 GB): "Setup could not install the Windows boot loader. To ensure that your C: drive is formatted and that the drive is not damaged. I tried with three other HDDss.
  What should I do to install this system? (Same users do not have these releases)

  Thanks for help
  Adrian

  Hello

  1 don't forget to prepare your hard disk with fdisk (a bootable partition) and format it with the Fat32 file system

  2. start by a MSDos saved in your floppy drive-drive with drivers for your PCMCIA CDrom drive (Freecom)

  3. copy the entire i386 to the W2K installation CD directory your HD, be sure to have loaded smartdrive, otherwise it will take ages!

  4 start again with the saved, go to the i386 directory and start Windows NT

  You can look here for more information about freecom pilots and the bootdisks: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
  On your 3440 it should be easier than with the R100 because of normal 2.5 "HD 6 GB, but the problem is basically the same

• Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.

• Am I being hacked from a website of popup saying I need to update my video player?

  I've been on Fingerhut. com (first time) when a popup that has engulfed the entire page said that I had to update my video player and should be less than one minute, 10 seconds actually. He just didn't feel, so I googled and he came is a scam, at least I'm sure it's a scam, I moved my mouse over the button install and the link was helpingtrk.com/base2.php. I googled url and is came up with what I thought was a a forum page, but it was another page of the scam, the url that has been http://mediaupdate15.com/418888/?v1=1 & v2 = 1 & v3 = 1 AND when I looked in my 'history', that the link had a greyed link that has been http://za1.zeroredirect1.com/zcvisitor/a7c6b420-12eb-11e5-bbcf-0a936b024545 that appears in my cookies in gray.

  I NEVER clicked on anything whatsoever on the pages, my question is, just being on these pages, I got my computer infected by a virus?

  If you have not downloaded anything, then most likely you are not infected. But it is worth checking:

  (1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This should help discover any install/updater that can push other unwanted software. Beware of everything that you don't recognize / remember, since malware often uses sounding names important or innocent to discourage you remove. Out as much garbage as possible here.

  (2) very probably, it was generated by an ad in the site, but please check for bad just in case modules.

  Open Firefox page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  (3) Finally, you can complete your security software regular with sweeping/cleaning of the tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.

  Clean it up?

• Portege 3440: Where to find the recovery disk and drivers

  First of all Hello to all,

  This is my first post and I'm afraid, it is a bit of an oldey.

  I came in possetion of a Portege 3440 netbook with cd players and external floppy drive.
  The problem is that the cd player works via the NIC port (I think it's pcmia?)
  I'm a surfer of money so not sure.

  Anyone know where I can get the drive system for this machine and how to install the drivers etc.
  I am hoping to get to the top and running with win2k but will come back on if communal win98se.

  Sorry this is so long, but hope you can help me.

  My deep gratitude in advance to all.

  Hi mate

  It's very old portable machine and I'm afraid that you would not be able to order the recovery for this laptop m disk.
  You will need to install the Windows operating system using a disc of Microsoft.

  On the European driver Toshiba page, you will be able to find the drivers and software for this laptop.
  You must choose Archive product Type, because the old drivers are placed in the archives.

  You will find USB - FDD driver. When you connect the USB floppy drive to the laptop it is ask for a TEAC (mainly in Europe) driver or a driver of YE-data (mainly Asian). Please check which of the drivers you need by connecting the laptop floppy drive to download the driver.

  You will also find companion diskette. The accompanying disk contains programs to configure computers Toshiba installation information and to test the equipment. It also contains files and utilities that allow you to get the most out of your Toshiba computer.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege 3440 CT - cannot install the Win XP - BSOD 0X0000007b

  Hello

  I HAVE A TOSHIBA * PORTEGE 3440 CT *.

  I WANT TO INSTALL WINDOWS XP.
  THIS LAPTOP DO NOT HAVE A CD-ROM DRIVE AND I USE A LIGHT OF 24 PCMCIA FREECOM TRAVELLER CD.
  I DOWNLOADED THE FREECOMBOOTDISKCREATOR. EXE TO MAKE MY USB FLOPPY BOOT DRIVE AND STABLE THE XP.
  PERHAPS THE PROBLEM IS THAT MY COMPUTER DOES NOT RECOGNIZE THE USB FLOPPY OF FFD TO RUN AND INSTALL WITH A BLUE SCREEN OF DEATH (ERROR 0X0000007B) ABORDED.

  I HAVE THE WINSOWS XP SP2 OEM.

  THANKS FOR THE HELP
  NIK

  First of all thank you for sharing this with us and great info you could install Win XP using the external CD/DVD drive.

  > but if you can help me with a solution without additional CD-ROM usb drive I would be gratefull!
  Hey mate. It is important that you could install Win XP ;)

  PS: as far as I know you don t need any driver to start from the CD/DVD of PCMCIA drive. It s controlled by the BIOS.
  Therefore, it should be possible for a start of the PCMCIA CD/DVD drive and reinstall Win XP

• Portege 3440 OCT - battery charge hold only for 10 Min

  Hello.

  I recently had a Portege 3440 OCT, XP, seems a good bit set up, except that it does not hold its charge very long (10 min). Even when it was turned off and was in charge for about 3 hours.

  Can someone help with this problem? Any help would be appreciated

  Hey Buddy,

  Well, this laptop is really old so I m not wonder about this question. A battery can be recharged about 500 and when it runs out shortly after fully recharging the battery, the battery can must be replaced. You may need to buy a new battery.

  You can get a new form of battery to an authorized service provider. They can sell you all Toshiba spare parts and new battery, your laptop should work on battery power for a long time yet. ;)

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Portege 3440 Windows Nt

  Hello!
  I have a Portege 3440 with Windows NT operating system and I am looking for a driver USB for Windows NT. Where can I find it?
  Thank you.

  Hello

  Sorry, but I have bad news for you. There is no USB for NT drivers. Please read this article written by Microsoft

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Good bye

• Can I update the video BIOS?

  How can I update my video BIOS?

  Hello!

  I've never done an update of the vBIOS and it s doesn't know only not for me if possible.
  She would not recommend the vBIOS updates.

  But you can update the BIOS or the graphics driver. You can download it on the Toshiba page.

  Good bye

• Installation CD-ROM PCMCIA (Portege 3440)

  Hello.
  I have a small problem getting my Portege 3440 to recognize the cd rom drive.
  I saw the dossetup and started to transfer the files to the newly formatted c drive.
  However, the installation comes to 10% then stops and says that the destination is either full or protected writable disk.
  I formatted the drive, I know that there is at least 6 GB of space.
  Any help with this would be greatly appreciated as I'm stumpped now and my head will soar to scratch...

  Hello

  I guess you are trying to install the OS by using Microsoft full version CD because if you use the recovery CD it shouldn't happen. I have really no idea why this happen. Please check again the ability of the C: partition

  If you want you can also copy the entire CD on the second partition and start the installation without using an external device.

  Good bye

• Museums of HP 15-n220sq: I can update my video card

  Hi, I have a

  Product HP Pavilion 15-n220sq number: G1N02EA; Chipset: AMD A76M FCH

  Can I change video card? with a better?

  The laptop is perfect until now, I just want to update my video card, with a better

  Hello

  Unfortunately no, the amd gpu is integrated with the system board and is not an evolutionary element - this is the case for almost all mobile phones of consumer class.

  Kind regards

  DP - K

• blue screen after auto update. mentioned video driver.

  had several automatic updates of microsoft and now I get errors and blue screen. "thread stuck in device with video driverblue problem.

  Hello

  • What is the full error message that you receive?
  • When you receive the error message?
  • Are you able to boot to the desktop?

  If not, you can check out these methods:

  Method 1:

  Use the option ' enable video low resolution (640 × 480) ' start and then update your video card driver

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. the display Advanced Startup Options , use the arrow keys to select Activate video low resolution (640 × 480)and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver.

  Method 2:

  Start the computer in safe mode and disable your video card

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. the display Advanced Startup Options , use the arrow keys to select Safe Modeand then press ENTER.

  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen.

  e. open Device Manager by clicking Start, point to settings, and then click Control Panel.
  f. double-click Systemclick on hardwareand then click Device Manager.
  g. right click on your graphics card and then click disable. Confirmation prompt, click Yes.
  h. close all open windows and restart your computer normally.
  i. When you restart your computer, if you can see your desktop, there is a problem with your video card. Try to update your video card driver.
   
  If you are able to boot to the desktop, try to update your video card.
  Here is the link:
  http://support.Microsoft.com/kb/283658
   

• Need to update the video driver card but see no updates available

  Recently, I downloaded minecraft. I played only once and I know that its law does not. I had to lower the acceleration so it will play. Someone told me "if I have to lower the acceleration so I have to update my video card." I tried to update, but when I try it says I have no update available. Also my current v-card is a intel gm965. Help, please.

  * original title - my computer cannot update video card but he can't play minecraft as it should. What should I do? *

  Hi Craig l. Williams,.

  Have you checked on the website of the manufacturer directly?  If you bought it separately from the video card you want to navigate to the Intel Web site.  If it is preinstalled on your system, you want to go to the Web site of the manufacturer of the system for the updated drivers.

  For more information, please visit:

  http://support.Microsoft.com/kb/283658

  I hope this helps!