Can I update the video BIOS?

Similar Questions

• Update the video BIOS

  Is it still possible?
  I downloaded an acer for the same video card (HD 3650 512 MB DDR2) - and see via RBE (radeon bios editor), it is rather better. At least memory size detection is a matter essential to the games while with toshiba a I have no such results.

  Our configs with Bakk are same - proc and vcard are the same. Simply no OS.

  I just can't Flash this bios acer one due at least protection subsys (and maybe sth more than I do not know)

  + The message was edited: link has been removed - unauthorized +.

  Try to Flash the video card BIOS that was downloaded from another laptop to the manufacturer?
  Sorry, mate, but I doubt this does not work and I think that something like that could affect the functionality of your laptop.
  I'm not quite sure what might happen because I have never done something like this, but in my opinion you could damage the chip and the motherboard of m.

  Summary; I would not recommend this!

• HP Envy 17 Notebook PC TS: Can't update the video driver

  HP Envy 17 Notebook PC TS

  F9M13UA #ABA

  64 bit

  I upgraded to win 10. Now when I try to open CC Adobe Illustrator I get this message: "one or more cards software drivers are not updated. To use the GPU Performance, upgrade the software drivers to the latest version and then restart illustrator".

  I ran the program from the HP driver from the HP site search and I get this: "HP has encountered an error when trying to analyze your product. " Please verify that your product is turned on and connected, and then try again in a few minutes. Or display all drivers available for your product below. »

  I found a driver in the list below this message

  High definition (HD) of Intel Graphics Driver 10.18.15.4248 place 169.2 MB 25 January 2016

  I tried to install it and got a different error message saying "the pilot is not validated for this computer. You can get the correct driver from the manufacturer of the computer. »

  I'm not a computer genius. All I want is for Illustrator work. How can I get the driver I need?

  archivedmemorie

  Based on your response, I did a new search for the drivers of your PC, based this time on the product number that you provided, instead of the template information in your thread title and found very different results!

  Here is the link for the drivers and software page: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-TouchSmart-17-j100-Notebook-PC-series/5425742/model/7415743

  The Intel driver you mentioned matches on the page - so I have no idea why you get this error message.

  Have you tried to download and install the Nvidia driver?

  Given that your PC is so recent, I suggest you contact the HP customer directly and have them put you in contact HP Technical Support.  If all goes well, they can solve the driver problem, you meet with.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Good luck

• How can I update the video card driver

  video card

  How do I see what I've got the video card.

  Windows xp pro

  tried playind a new game and all I get is square and lines where should be the graphixs and letters.

  Hello

  Click Start-> Run & Type-> Dxdiag-> Ok. You will be able to get the name of display card and the model on the display tab.

  I hope this helps.

• How can I update the BIOS on my Sony Vaio laptop using disc or usb? Note: I can't windows at all.

  Hi, I want to know how can I update the current bios on my sony laptop using the disc or usb.

  I can't access the windows on the laptop at all, because I'm getting STOP: 0 x 00000 "a5 error that says: your bios is not fully compatible with acpi.»
  This error prevents me to access any live disc or recovery disks.
  I would like to learn more about records tho method.
  Thank you.

  Take it to a repair shop, you have damaged the card mother/connections

• Since the update to windows 10, I can't watch the videos on facebook or youtube

  I can't watch the videos either, they are just green tried all ways to sort, but nothing works, read loads of items here

  The details of your system shows that you have Firefox 31.9

  https://support.Mozilla.org/en-us/KB/update-Firefox-latest-version 40

• I have not changed my settings of the computer, I didn't accept the offer of update of Firefox and NOW I can't play the video, my music site subscribe to wonder of

  I took the opportunity to update firefox last week (June 9, 2012) and now I can't play the video, I subscribe to a site of learning music and he asked to upgrade me to the latest version of Flash, now I did and my videos still won't play If I use Chrome, I have no problem, Firefox has ruined my system HELP.

  Confirm the Adobe test page that Flash is installed?
  Update the Flash plugin to the latest version.

  • http://www.Adobe.com/software/Flash/about/
  • http://helpx.Adobe.com/Flash-Player.html

  You can find the latest version of the Flash player for Firefox on this page.

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

• Split 13 x 2 can't update the bios

  I have a new split of HP 13 X 2 computer laptop / tablet. I have upgraded to Windows 8.1. Tried to update the system BIOS but it fails. I have Kaspersky Anti-virus turn off when you run the update and my account is Administrator status. Evry time I try and update the bios, I get an error "failure" and said copy update has failed. What should I do to fix this?

  Just flashed manually with a USB key. Appears the utility tries to copy the update to the bios on hp/efi/bios on partition 2, but I can't find how to go from Windows, even with hidden folders to display. The update tool the wish was easier and you can specify where you put the update from version 'dumbed down too low to be useful.

  Steps to Flash manually:

  1 use the bios tool to copy the files to a recovery USB drive. It will create a Hewlett-Packard folder. In BIOS and the BIOS update, but the update f19 falls within the bios/current.

  2. with your PSU AC plugged, reboot the computer. Once the screen goes black, start hitting ESC.

  3. even if it seems you can arrow down and press ENTER to select F2, press the F2 key... without the function key.

  4. Insert the USB key, select the firmware, bios update, select the usb drive and navigate to the folder of the bios/current.

  5. you will be asked if you want to update the current bios of 16 to 19. Click bios update (forget what it actually says) and sit down and let it do its thing.

  6. restart. If you have enabled as I do of bitlocker, now you must pick up the keys. After that is done, then you have a F19 X 2.

  Have not used enough to see if 19 solves this problem of the touchpad, but refuse to do workaround above.

• System freeze when it is opened the tool update BIOS, how can I update the BIOS?

  I'm trying to update the BIOS on my 14 (1016tx) want.

  I downloaded the latest BIOS from the HP website and open it, the dialog box has 2 buttons only start at 1, output 2

  Click 1 start, then another dialog box pops up saying not to stop your computer blablabla... and asks me to confirm, OK or cancel

  However, all input devices have no answer at this time. No keyboard, touchpad, usb mouse no longer works. USB ports seem to be put off, since the light on my usb key is off.

  The power button does not work neither. I continue to press it for about 1 minute, just can't turn off the machine and I have to remove the power cord and the battery to stop the crazy fan.

  p.s. I just installed the operating system. (Windows 7 Professional 64-bit) until I try to update the BIOS.

  Thanks for the quick response.

  I managed to fix everything on time. It seems that the problem was caused by the absence of HP_TOOL partition on my hard drive.

  I downloaded the UEFI BIOS HP update and installed it, he created a partition of 2 GB HP_TOOL for me, and then the BIOS update tool work (it will restart the computer to update the UEFI BIOS and BIOS update).

  P.S. Just wonder why HP releases suck a stupid tool. If it relies on a HP_TOOL partition, it should just say that instead of drive the crazy fan and disable all buttons!

• Satellite Pro L350 - where can I get the new BIOS?

  I downloaded the new BIOS - 1.60 for Satellite Pro L350 and it generates an error saying "This BIOS is not for your laptop".

  Where can I get the new BIOS - 1.60 for * PSLD0E Satellite Pro L350-154-02601WS4 *? Thank you

  Hello

  Are you sure that you have a Satellite Pro L350 PSLD0E?
  The series PSLD0E is a Satellite L350 (not Pro).

  But the BIOS update, you can find the Toshiba site.
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• I can't see the videos on youtube and other sites.

  Something has gone wrong with my Dell laptop, I can't see the videos on youtube and other sites. I updated latest version FlashPalyer, it does not solve the problem. Facebook also not opening. I'm trying to see the online football match, where I used to see, I am not able to see it too.

  Hello

  1. you are trying to access YouTube from within Internet Explorer?

  I suggest you to follow these steps and check if that helps.

   

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• File extension M2TS I can't open the video files transferred to my laptop from my brother.

  I can't open the video files transferred to my laptop from my brother. The CD with his camcorder lets a user / one machine, so I can't install the program that came with it.

  This is the extension M2TS, and although there are outreach programs going over there, I read on most for the DO NOT download. MS has a program or driver, or something I can use. And I need it like RIGHT NOW as I have videos that everyone in my family reunion awaits, and I leave in the morning.

  Thanks a lot if you can help...!

  Convert m2ts files in wmv format would be
  the best bet.  The following freeware can be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free video converter Freemake
  http://www.Freemake.com/free_video_converter/
  (Windows XP/Vista/7)

• Vista WMP I can't watch the video in full screen

  Vista WMP I can't watch the video in full screen or any size other than 100%...if that I change of 150% or 200%, it only shows the screen completely black but sound pieces as usual...

  Hi the Justice Clark,

   

  1. what version of WMP are you running?

  2. to check the press ALT on your keyboard and then click Help on

  3. what type of file you are playing?

  4. What is the file format?

  Update drivers please follow the link below.

  www. Microsoft.com/downloads/en/default.aspx

• Can not update the settings on the Airport Express

  Currently have a facility - two extremes and an Express network.  I for the life of me can't update the Express settings. I always get an error message but I can update the settings on the two extremes very well. I can make changes to the Express with my Iphone but I can't with my Imac.  I want to activate the function of 5 GHz but I can't do that via my Iphone - with the desktop app I think.  Can someone help me?

  Let's first check and make sure that on which Airport Express version you have.

  Your version of the AirPort Express is there only 1 or 2 Ethernet ports?

  The Express to connect to your network and extend it wireless?  Alternatively, the Express connects to one of the extremes airport using a wired Ethernet cable connection.

  Then, I would be not too concerned of not being able to 'see' the Express of the iMac as long as you can access the settings of the iPhone. You can make almost any change using the iPhone you can use a Mac.