Portege 3490CT - turn off problem

Similar Questions

• Portege M200 turns off without warning.

  Hi guys,.

  My Portege M200 has just developed a problem today. It stops without warnings or information.
  Event Viewer has not recorded anything out of the ordinary, I suspect that its overheating issue because I'm looking at the time cpu and gpu using speedfan and PC wizard and they both read the time cpu in the 1950s and PCWiz reads the temperature of the gpu in the 57. But I have no info on the fans is this normal? !!! ?? !!

  The fan speed has 1 manual control for a fan (is not one who say, but seem to be the cpu fan) that I now put 100% to test it and see if it stops again. This has been on during about 5 minutes and the cpu temp is down to 36.

  I have no way to control the fan gpu or down the temp on this...

  Is it possible to test the fans / sensors to determine where is the problem?

  Can anyone think of all the other things that I can check or which would do this?

  Thank you guys.

  I think also that occur due to overheating. In such cases, the laptop turns off simply without any warning. Sorry, buddy, but I think it's time for cleaning. Here the question how you want to do. Only or it should be done on a career path.

  Your decision!

• Satalite P300D: standby and turn off problem

  I have a problem with the sleep mode in particular. When I close the laptop, it is supposed to go into sleep mode, and sometimes he just did it, but other times (especially if I do two times after eachother) the fan turn on extremely hard and the screen goes black and the only way to stop this is to press the power button until the laptop turns off. Sometimes, I have the same problem with the laptop shutdown.

  I think it started right after the installation of windows 7, might have something to do with it?

  Hi mate

  Well, this could be possible since the Windows 7 supports a few different settings of energy management as well.
  I recommend the BIOS.
  You need to update it if a newer version is available.

  In addition, you must install Win 7 Vientiane (value package) which can be downloaded from the page of European driver for Toshiba

• Presario CQ35: Compaq Presario CQ35 system turn off problem

  Hello
  
  My phone is showing "Enter password or power on password"
  
  I can't find any password key that worked, but after a few tryes says system turns off,: 55053602.
  
  Can someone help me,
  Thank you

  @pejal

  Enter 40931224

  Kind regards

  DP - K

• HP photosmart more B210 series - scanning and turning off problems

  I run Mac OX Lion 10.7.5

  I think that I've updated my software to v.2.12 but when I click on the scanner, it says it is version 3.9.11

  When I go to download the software there is nothing for this model.

  Currently, the scanner will scan once then freezes. It turns off either and I have to unplug it. She telling me that it is not connected to the computer.

  can you suggest anything please?

  The option key is NOT a command.  It is next to him. It is marked 'option' or 'alt '.

  Preferences system is located in the Applications folder.  From your desktop, click on Go-> Applications-> system-> print and fax preferences

  You hold the option key key by clicking on the small "-" keys in the print and fax.  The "-" key located at the bottom left of the window to Fax and print next to the button «+»

• Portege 4000 turns off after 20 minutes

  My Portege 4000 shuts down suddenly after 20 minutes, sometimes it takes our during 30-40 minutes.
  He then walks back for a few hours.

  Here's what I've tried, and it still happens:
  -On the sector, with or without battery
  -With a different (same) AC apator
  -Unplugged battery operated
  -Held at the BIOS screen (incase it was a Windows problem)

  The fan works, although it feels very powerful.
  And the power light flashes an error code (how can I decode it?).

  Although I don't really use it much, I really want my small Portege of junk.
  Any ideas?

  Hello

  This looks like a laptop overheating if the temperature is too high, the portable computer shuts down to prevent the equipment from damage

  But the flashing error code is unusual. To my knowledge along means 0 1 and short
  Then you will get a number like for example this one: 0001 0001 because of the LSB (least significant bit) you will need to read behind 1000 1000 and then convert it to HEXADECIMAL. All that s
  Also check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16497&MessageID=60354

  But look buddy, I think you should contact the technical guy should check this laptop fault is a bit strange

• Portege M200 turns off automatically without doing anything

  I did nothing, but my nootbook going to sutdown nothing.

  Can someone please help me solve the problem.

  You have a Satellite M200 or a Portege M200?

  In any case, check the dust in the radiator. If there is too much dust, the CPU is overheating, and the system will shut down to avoid damage.

  You can remove the dust using compressed air or a vacuum cleaner.

• Turning off problem

  When I recently bought a new SSD, I cloned my configuration (Windows 7, 64-bit) of my old SSD. On this old SSD, there is a copy of the standalone version of LR6. This may explain the message that keeps appearing when I open LR on my new SSD, I now start to leave, telling me my serial number is already in use on the maximum number of computers, i.e. Adobe think I have 2 (or more than 2?) copies of the race of LR. It seems to me that I have two options: boot from the old SSD, enter LR and disconnection, so disable this copy - this I'd rather not do - on the old SSD drivers are out of date, therefore risk blue projection and lack of access to the LR on this disc. or simply reformat the old SSD, which is dead simple and avoids the problems mentioned previously, but would it disable that copy of LR? Or y at - it a phone number, I can call (I live in the United Kingdom) to solve this problem? I tried to find such a number on the website of Adobe, but I keep going round in circles.

  1. Click on the link above in response #5
  2. Scroll through the list and choose Adobe Lightroom
  3. Click on the Adobe ID and signature-in (which is one of the few ways to get the chat button)
  4. Click on the big blue button
  5. Under recommended (chat & phone) click on chat
  6. In the activation of type red box & deactivation or whatever you prefer
  7. Click the start Chat button that now lights up blue

  You may need to wait until an agent is free. Have your serial number available.

• Turning off problems

  I reformatted my old iMac, erase my 5.5 Adobe creative costumes. I want to install on another computer. How to disable the version that used to be on my iMac, if I erased the disc?

  Hello

  Please visit https://forums.adobe.com/thread/2041990

  See also How can I disable my Adobe software?

  Kind regards

  Shelly

• When I turn off my screen saver and then change my theme to display then I see my screensaver off icon to dedicated.

  Screen standby turn off problem

  Hi I have Windows 7 and when I turn off my screen saver and then change my display theme I see then my screen saver icon will go offshore for on.  I disable the screensaver again and then change the display theme and once again I see lit again screensaver icon. This computer is a non-Autonomous network computer.

  Hello

  I suggest to create a new user account that the user account can be altered, please follow the steps in method 2 in my previous post to do the same.
  I hope this helps.

• Hi why my iphone wifi turn off automatically when I lock my device? And how can I solve this problem

  Hello

  Why my wifi from the iphone 6 turn off automatically when I lock my device? And how can I solve this problem?

  Yes, it's designed for it. If, however, you plug, WiFi will not drop when the screen is locked.

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• Portege A600 - SD reader disappears and cannot turn off WLAN

  Hello
  I have 2 problems with my a600

  1:
  When I suspend or Hibernate, my sd player disappeared when my machine wakes up again... It's really disturbing when I run programs of it. eject and re - insert card does not help.
  System Manager sd reader to disable and enable the work of sd reader, but I don't do that all the time.
  This is the normal way that a toshiba works or is this a problem of my machine? any help?

  2:
  with flashcard wireless I can turn off wifi (I barely use) but when I reboot it is again and again. Is it possible to change this default setting?

  Hey,.

  1: have you already updated the card reader driver?

  2: you can disable the wireless network adapter in the device for example Manager. Then the wireless network card is disabled until you turn it on in the Device Manager.

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Screen turns off when working DC but Portege R500 unpluge

  Hi forum.

  Just bought laptop Portege R500 PPR50E-04x048en.
  When I start the PC (BIOS is set to default) when using battery everything works fine.
  When I unplug the power cord, the screen turns off. I plug it back, the screen is still off!

  Any ideas?
  FN + F5 works, but does not help.
  FN + F1 don't see it's something.

  Great!
  Thanks for the comments.