Presario CQ35: Compaq Presario CQ35 system turn off problem

Similar Questions

• Something in my system turns off Windows Defender.

  Something in my system turns off Windows Defender once from time to time, and I have to keep back on.

  I am running Windows XP and security programs I use are Microsoft Security Essentials, Microsoft Malicious Software Removal Tool,
  Spybot Search and Destroy and Ad-Aware from Lavasoft.
  I normally have all running at the same time, and with Spybot SD have also resident 'SD Helper' and 'Tea Timer"active.

  Any ideas what could cause this problem?

  Hello

  As you use Microsoft Security Essentials, the reason for this is that MSE has its own version of the Defender as part of its program.

  Using both programs at the same time can cause system conflicts, etc.

  Read this information about it:

  "Windows Defender and Microsoft Security Essentials on Windows 7, Windows Vista and Windows XP.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Q: I have to manually disable or uninstall Windows Defender, if I use Microsoft Security Essentials?
  If Microsoft Security Essentials does not automatically uninstall Windows Defender on XP, you must manually uninstall Windows Defender through Control Panel of configuration/Add / Remove programs.

  See you soon.

• System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

  I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

  whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

  Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

  The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

  Thanks for any help that anyone can provide. I am running WinXP Sp3

  Hi PAULARUNNELS,

  ·         What happens when you try to start in the Advanced startup options?

  ·         You receive the same error?

  ·         You external devices connected now?

  Try the following.

  Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

  How do I recover from a corrupted registry that prevents Windows XP startup

• System turns off after the connection because UPS is misconfigured

  Installing a UPS on XP as he said "he couldn't communicate with battery backup.  I suspect (pretty sure) I put the codes, i.e. signals for the loss of power senseing incorrectly.  So when XP starts, connects and defines then personnal settings immediately it detects a loss of power and down, it is to say newspapers turns off and stops.  By inserting a bootable disc, I get the display for differnet start modes, etc. without danger, but the arrows do not work.  He maintains "normal" startup  So, I'm in a loop.  Pressing F8 does nothing.  I tried several times with the same results.

  Can I get a bootable CD to somehow allow me to set the operating system to default values?  Or would that even work?

  Is this really what the message really says:

  He couldn't communicate with battery backup

  What is the brand and model of your UPS and you have the correct wiring to it and the installed software?
  Configuring UPS never worked correctly before?
  What do you mean "set you codes loss of power properly detection."

  What bootable disc are you using?

  If you think that the XP UPS Service gives you a hard time, you can start the XP Recovery Console and disable it.

  If you have any bootable installation CD XP authentic where you can start in the XP Recovery Console, so you can make a bootable CD from the Console of the Recovery XP (no XP media required) and then just disable the UPS Service does not start during the next reboot.

  Once you enter the Recovery Console, type this command:

  turn off the UPS

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Mini Hi end component system turns off automatically

  I have GZR88D of MHC, a mini Hi Fi components system. When start and play anything it automatically turns off after a minute and seeing power flashes.

  So, I have to pull the plug to stop the power indicator flashing.

  Does anyone know the reason for this, and what is the solution?

  If the STANDBY light flashes, check the following:

  • Make sure that the voltage selector is set to the right voltage according to your power source (NOTE: the voltage setting are not available on your device)
  • Make sure that you are only using the supplied speakers.
  • Make sure that the speaker cords are connected to the appropriate terminals.
  • Make sure that nothing is blocking the vents of the system.

  Try to reconnect the power cord to the power outlet after the flashing stops. If it persists, will be necessary.

  If my post answered your question, please mark it as "accept as a Solution.

• Satellite P770 system turns off during recovery

  I am the owner of a Satellite P770 and during the recovery, the device turns off to 'Performance testing' stage. It has everything installed and I managed to stop the recovery process.

  It looks like there some cosmetic minor things, that he has not completed, but I always get the opening screen saying its completion with the first start of time.

  I went into the performance tests of Win7 and it does the same thing, instantly turns the machine.

  I really need help!

  Brad.

  Hello

  Is the Satellite P770 disables automatically running other applications like MS Office, Web browser or even some games?

  Usually the laptop would be closed automatically due to high temperatures but I don't very well if this is the reason in your case m

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• HP photosmart more B210 series - scanning and turning off problems

  I run Mac OX Lion 10.7.5

  I think that I've updated my software to v.2.12 but when I click on the scanner, it says it is version 3.9.11

  When I go to download the software there is nothing for this model.

  Currently, the scanner will scan once then freezes. It turns off either and I have to unplug it. She telling me that it is not connected to the computer.

  can you suggest anything please?

  The option key is NOT a command.  It is next to him. It is marked 'option' or 'alt '.

  Preferences system is located in the Applications folder.  From your desktop, click on Go-> Applications-> system-> print and fax preferences

  You hold the option key key by clicking on the small "-" keys in the print and fax.  The "-" key located at the bottom left of the window to Fax and print next to the button «+»

• Satalite P300D: standby and turn off problem

  I have a problem with the sleep mode in particular. When I close the laptop, it is supposed to go into sleep mode, and sometimes he just did it, but other times (especially if I do two times after eachother) the fan turn on extremely hard and the screen goes black and the only way to stop this is to press the power button until the laptop turns off. Sometimes, I have the same problem with the laptop shutdown.

  I think it started right after the installation of windows 7, might have something to do with it?

  Hi mate

  Well, this could be possible since the Windows 7 supports a few different settings of energy management as well.
  I recommend the BIOS.
  You need to update it if a newer version is available.

  In addition, you must install Win 7 Vientiane (value package) which can be downloaded from the page of European driver for Toshiba

• System turn off when you play.

  My system shuts down when I play games. Never had this problem before. I received the following: Esetup.exe is infected with win32: game. Fix error that 42061 repair failed and I had the option to delete the file that I did. The system is up to close automatically. I'm not quite savy to understand this. Please help.

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this game?

  3. are you able to play other games with success?

  4. What is the full and exact error message?

  Method 1.

  I suggest you perform a virus scan to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  You can try to uninstall and reinstall the game and check.

  Fixing game performance problems: http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Refer.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• I have compaq with Vista system > & have a problem running in normal mode, the screen is blank

  I have a Compaq laptop with Vista operating system. Since yesterday, whenever I try to start the window of the screen after that some time is empty and only the cursor shows. But the system only works when I press ctrl + alt + delete the display shows various options. However under safe mode I can use the laptop including the Internet, etc.

  How to get back to normal

  Hey Suman,

  Follow these steps below:

  Perform a clean boot according to the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to add the computer to his usual way

  Reply back with the results

• Portege 3490CT - turn off problem

  My Portege 3490CT began to fade after between 1 and 15 minutes from powering it. It now has a damaged operating system because Windows Update was not able to complete an automatic update. Of course, I cannot locate a recovery CD and do not have a CD Player for her in any case.

  Y at - it an easy solution for this problem of sleep and no one know where I can source a W2K recovery disk?

  Thanks in advance.

  Hi Stuart,

  This type of unexpected shutdown is usually related to overheat probably so heatsink CPU having dirty upward with the dust and debris sucked into the cooling fans. It can be cured by clean dust accumulation.

  The recovery CD copies are available from any Agent of Service authorized Toshiba.

  Kind regards

• Turning off problems

  I reformatted my old iMac, erase my 5.5 Adobe creative costumes. I want to install on another computer. How to disable the version that used to be on my iMac, if I erased the disc?

  Hello

  Please visit https://forums.adobe.com/thread/2041990

  See also How can I disable my Adobe software?

  Kind regards

  Shelly

• Turning off problem

  When I recently bought a new SSD, I cloned my configuration (Windows 7, 64-bit) of my old SSD. On this old SSD, there is a copy of the standalone version of LR6. This may explain the message that keeps appearing when I open LR on my new SSD, I now start to leave, telling me my serial number is already in use on the maximum number of computers, i.e. Adobe think I have 2 (or more than 2?) copies of the race of LR. It seems to me that I have two options: boot from the old SSD, enter LR and disconnection, so disable this copy - this I'd rather not do - on the old SSD drivers are out of date, therefore risk blue projection and lack of access to the LR on this disc. or simply reformat the old SSD, which is dead simple and avoids the problems mentioned previously, but would it disable that copy of LR? Or y at - it a phone number, I can call (I live in the United Kingdom) to solve this problem? I tried to find such a number on the website of Adobe, but I keep going round in circles.

  1. Click on the link above in response #5
  2. Scroll through the list and choose Adobe Lightroom
  3. Click on the Adobe ID and signature-in (which is one of the few ways to get the chat button)
  4. Click on the big blue button
  5. Under recommended (chat & phone) click on chat
  6. In the activation of type red box & deactivation or whatever you prefer
  7. Click the start Chat button that now lights up blue

  You may need to wait until an agent is free. Have your serial number available.

• Presario CQ61: Compaq Presario CQ61 system Disable

  Hello, I'm trying to re - install this for some, and it comes on with the message system turn off: 73827136

  Can someone advise me on this issue?

  Thank you

  Hello

  Enter 62785118

  Kind regards

  DP - K