Portege 4010: How to install the cd - r or dvd - r?

Similar Questions

• Portege 4000 - how to install the display driver for XP?

  Hi-

  I did a clean install of XP Portege 4000. The system has been previously default 98SE.

  Noticed that there is a yellow exclamation point in other devices about the video controller (VGA compatible). I downloaded the display on the Toshiba site driver (if it is the right thing?), but can't seem to install. There is no setup.exe to help me.

  My XP screen covers only 3/4 or more of the screen total, so that something is wrong somewhere...

  Hello

  No, Toshiba don't support Linux or Ubuntu on the Portege 4000 and you can t find drivers for it on the Toshiba page. Only Windows drivers are available.

  I m not an expert in Linux, but as far as I know you don t need additional graphic driver for Ubuntu. You should only change the resolution of the screen or something in the settings of the screen. I had the same problem on the first time I used Linux and I could solve it without additional driver but I put t know how I did it :(

  Good bye

• How to install the software on a dvd

  I'm reading the dvd provided with my new printer and I don't know where it is read. The dvd appears just back after a few minutes.

  I had a similar problem with my hard drive.

  Check if all other discs work when you put them in your hard drive.

  If they are, your disk drive may not be possible to read the DVD provided with the printer (it cannot be done for Mac etc.)

  If the other drives do not work, your hard drive may be defective. Take your Mac to an Apple Store and ask them to study the problem for you.

• Portege M300 - how to install driver LAN

  Hello

  I got a new hard drive put in my Portege M300 and managed to get the drivers all released on except the lan and a modem.
  I found the drivers here and make them, but which file do I use to install the application? ...
  I have one that says "PRO network driver uninstaller connections" but nothing obvious for amd installation... no files for directions...

  Any help appreciated.

  Thank you

  How to install the LAN driver?
  It is very easy, you can install it in the Device Manager.

  First of all, you need the correct LAN driver.
  You can find the Portege M300 on the Toshiba drivers European page driver-> * Archives *.

  After the LAN driver has been downloaded, you must unzip this package.
  Then go to Device Manager, select the unknown device (NIC) in the network adapters, select install or update the driver and follow the instructions on the screen.

  Welcome them

• How to install the plugin html on OS 10.11.6

  How to install the plugin html on OS 10.11.6

  For html5, you mean? Your browser must be able to show html5 without plugins.

  If something does not work for you, please explain what it is.

• How to install the latest version 5.1.1 ipad?

  How to install the latest version 5.1.1 ipad?

  If you have an iPad 1 (no cameras) may not be updated beyond IOS 5.1.1.

• How to install the avg security toolbar in Firefox?

  Hello

  I installed IE10 on my new desktop (HP W7 Ultimate 32 and 64 bit), downloaded AVG free and selected the option to include the AVG Security Toolbar - everything has been installed. I then downloaded Firefox 22.0 but found no option to install the AVG security toolbar. How to install the AVG security toolbar into my existing Firefox browser? Thank you. jav1, 10/07/2013

  To enable secure in firefox, read the security settings. I don't have a number for AVG, but try to use their support for http://www.avg.com/us-en/support

• Re: How to install the backup software?

  I have Toshiba Recovery DVD for Windows XP of origin. But after the installation in backup softare avialble in system tools.
  I tried to install it from adding a program into the Panel control or extarct from the DVD. Also, I tried to download it from the Microsoft Web site, but there is no chance.

  Can someone tell me how to install the backup software?

  Concerning

  Check http://support.microsoft.com/kb/308422
  Maybe this article will help you.

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• How to install the latest version of the BIOS Tecra m2

  How to install the latest BIOS P000Bv160 on a M2. install toshiba BIOS instructions say to use a floppy disk, but the file size is 1.48 MB so not fit on a 1.44 MB diskette. can I use a USB?

  Are you sure that you have read the statement on the right?

  AFAIK it's win-BIOS version (windows version) and not a version TRAD (traditional), so the update of the BIOS must be running OS.

  There should be an exe file that must be executed to start the update of the BIOS!

  Please check the instruction again!

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• How to install the start.vbs file

  Hey... How can I install start, inter net vbs file. I use XP as my software.

  Hi ALAN,

  Thanks for choosing Windows and welcome to the Community Forums of Microsoft.

  I see you want to know how to install the file start.vbs from the internet.

  Let us work together to solve this problem.

  However, we need more information on this issue. Please answer the following questions.

  1. do you have a code error messages when you try to install the start.vbs file?

  2. where did you downloaded it go?

  3. what browser did you use to download?

  4. what service pack is installed?

  5. have you got any guest of Microsoft to install start.vbs?

  Please provide more information.

  Check out the following link.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Please get back to us with answers.