Portege M400 - need to restore CD English

Similar Questions

• Portege M400 - need UJ-842 DVD player firmware

  Hello

  I've messed with my DVD player firmware, can someone point me to some sense where I can download Mat * one * UJ-842 * firmware DVD RAM (OEM Toshiba)?

  Thanks in advance

  Deniz

  Hello

  I wonder why someone's trying to Flash the firmware of readers with another incompatible?  :| Which is really strange.

  In any case, seems not good friend in my eyes you ve damage parameters of drives that makes the drive unusable.

  Is Toshiba driver page doesn't provide a firmware that could help you to flash back settings, to be honest I don't think that you will be able to find a compatible it it s not available on the Web from Toshiba site

  I think you the last option might be Toshiba authorized maintainer in your country.
  An authorized service representative might be able to bring readers to life

  Good luck

• Portege M400 - cannot install OS or restore an old image

  I have a portege M400 and im hardly set any operating system of windows on them. When it gets to the stage where he asks what hard drive to put in place the windows files to, it does not detect the drives.

  I also have an image on a hard drive that I use a universal driver restore program to restore to any laptop regardless of the make and model and which also blue screens after the logo of windows xp when it starts up. The toshiba is the first laptop that I fell on this issue.

  The BIOS is currently 1.8 I think, I can't even put the hard drive in compatibility mode or AHCI.

  im a little confused about restrictions of this laptop.

  Can someone guide me on what I need to do to install windows on this machine please?

  Timox is right: the RAID driver must be added during the installation of Windows XP.
  During installation, you will be asked to add 3rd third-party drivers. As I m not wrong not you must press F6 to add the RAID driver.

  Very important note: do not format the HARD drive once the RAID driver has been added because this would remove the RAID driver from the HARD drive and installing Windows XP will fail again.

• Portege M400 recovery English CD

  Hello, I was hoping that someone could help me. I just bought a Toshiba Portege M400 a guy on eBay. When I received it, all the manuals were in German, but the operating system and the programs were in English when I turned it on. So I decided to test the recovery CD to see if it would work, because I knew that I would probably need it in the near future. However, when I installed the OS was in German, all toshiba programs are in German. I sent the guy I bought it said to contact toshiba and see if they would be able to send me a recovery CD which is in English. I hope someone can help me coz Ive has now been left with a tablet pc that I can't use coz I don't understand German =)

  Thank you
  Gary.

  Hi guys

  I get the same info from the ASP in my country. You can get the Toshiba Recovery CD in the same language, where the laptop was purchased.
  If you want to use another language of the OS, so you need to install the operating system from the original CD of Microsoft and then you can download and install the necessary Toshiba drivers on the site of Toshiba driver.
  By the way. Each manual user in all languages, you can also download from the Toshiba site.

• Need a recovery media for my Portege M400

  Hello

  How are you?
  Please I need recovery CD/DVDs for my Toshiba laptop.
  It's the Portege m400 (ppm40e). Operating system is Windows XP tablet

  Please man I need.
  I have no system

  Thank you

  Check out this Web of Toshiba Reocvery online store site:
  https://backupmedia.Toshiba.EU/landing.aspx

  You may be able to order the Reocvery using this page.

  If not; you will need to contact the ASP (certified partner) in your country for a new CD of Reocvery!

  Good bye

• do I need xp tablet edition on my toshiba portege m400

  I installed xp pro on it and the touch pad does not work need me the tablet extensions?

  can I just add tablet to xp? and where can I find?

  Hi Raymondsmith,

  Thanks for choosing Microsoft Community!

  If I understand correctly you installed XP Professional Toshiba portege M400 and tactile function does not work.

  Raymondsmith, XP Pro does not support the touch screen feature. I suggest you to install the Tablet PC edition.

  Also check out this link:

  Windows XP Tablet PC Edition frequently asked questions

  http://support.Microsoft.com/kb/327160

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Portege M400 system hangs after Vista system restore

  My system crashed by doing a system restore. Now on startup it gives errors. When I boot from the CD, I go for the choice of the partition to install on and there is no partition, and it has this error:

  No hard drive found. Click on load a driver to provide for installing mass storage driver.

  I went to Toshiba and Microsoft for help. Or can direct me to the right solution. I can't find my recovery disk. I have just the windows installation disc. Is there an easy fix for this?

  * original title - cannot fine partition on Portege M400 during installation of Windows Vista Business 32 bit.*

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  For any problem, reinstall Vista, contact the manufacturer of your laptop.

  Here is the General info on reinstallation of Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Need driver Win XP LAN for my Portege M400 network

  I have a Toshiba Portege M400 PPM40E, I managed to install Windows XP on the computer.
  I can't access my cable network.
  The wireless works well.

  What is the driver.
  We're talking about Gigabyte Intel 10/100 network documentation

  You can find the LAN driver on Toshiba download page-
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Very important is that you are looking for your old model Portege to archive, in order to choose option Archive under product type.
  I checked, and version 9.2.24 is available for download.
  Can find you it?

• Need BIOS for Portege M400

  Please can someone tell me where to find the latest BIOS for a Toshiba Portege M400. I looked on the Toshiba site, and everything is there for Portege is the M750 and M800.
  Thanks in advance,
  Joel

  Have you also checked ARCIVE option?

• Portege M400: Where to find Windows Vista 64-bit

  Hello!

  I've owned a Portege M400 for a period of 3-4 months now, and I wonder if there is even one person out there who managed to get this laptop computer working under vista 64-bit.

  I finally got bluetooth drivers to work, after the arrival of drivers available. But the following list does not work or I have not found drivers that work.

  -The buttons below the LCD
  -Accelometer (and all the utilities like screen rotation or to do something about tilting machine)
  HARD disk utility - protection (I installed Vista drivers, but they totally destroyed the machine and I had to restore system did not start after the installation of windows)
  -Fingerprint reader

  And I could live if I couldn't get buttons and accelometer to work, but still it would be great that the computer laptop everything would work.

  I'm starting to lose hope and I am already planning to install pirate Vista 32 bit in this laptop... Because it seems that it was a mistake to buy 64-bit ultimate. Some drivers Toshibas indicates they are pilots 'vista', but they do not yet work with the 64-bit version, which has little frustrating...

  In any case if someone could help me I would appreciate it a lot! Because I'm getting slowly frustrated with this problem with vista 64-bit.

  Thanks in advance

  I really understand you, but there is nothing to see! Toshiba Vista 64-bit drivers are not available on the Toshiba page. Nothing!

  Of course, you can use a Vista 64 bit on laptops, but you will get not all 64-bit drivers. Maybe more later but not at this time!

  So either you will switch back to Vista 32 bit or you need to use this notebook without 64-bit drivers. But this is not recommended

  Greetings

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• Portege M400 and Vista - load PSD ends with crash

  I am an owner of a Portege M400 (PPM40E) and recently upgraded my Vista operating system. All new drivers work very well except for the * TPM *. Here's what's happening.

  There's nothing wrong with the installation of security platform. I can create a disc to ensure personal (PSD), load and unload until the first time I got disabling my computer.
  After each attempt to load the PSD is answered by an accident. Two seconds after the sending of password, I get a blue screen that informs me the source of the problem: * PFN_LIST_CORRUPT *, a memory dump file is created and the system restarts.

  Anyone facing this problem? Does anyone know how to restore data from a backup manually the PSD created? The Restore dialog box does not accept the * .fsb file.

  It would be great if someone could help me with this as I have not 'clear' backup files that I had stored on the DSP.

  Thanks in advance,

  Rob

  Hello

  I googled a little and found details of error PFN_LIST_CORRUPT.
  NFP: Page frame number and describes the sharing of individual images of main memory where the driver running or orders of this application.
  If an application or driver is beyond this scope, then a BSOD will appear.

  Here are a few tips and proposals to solve this problem I found on an external Web page:
  -updated the BIOS and set the default settings
  -reinstall and update the display driver, audio driver, LAN driver, etc.
  -Reinstall the security help,
  -update the Windows operating system

  In the worst cases, this problem could be caused by a malfunction of the RAM, and in this case, the RAM modules should be replaced.

  Sorry, but I didn't find more info on this issue.

• Windows 7 on Portege M400

  Hallo,
  is it possible to install Win 7 on the Portege M400? There is Windows XP on the laptop.

  I'm German, excuse my bad English please.

  Many greetings
  Lobbie

  Theoretically yes but the question is: is this model of laptop taken in charge for Win7?
  Have you checked archive of drivers?

  You can do so under the http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Is a lot of Vista drivers can be used with Win7, then you can try installing the Vista drivers.

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)