Portege R700 - problem with fingerprints to connect on Win7

Similar Questions

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Once a problem with a mobile connection, whenever I try to open a specific site mozilla redirects me to the support of vodafone page, how can I have access to nooz.gr

  After a problem with a mobile connection, I tried with mozilla to connect to nooz.gr , but I've redirected the page services of vodafone, everytime I try again to open this site specific mozilla still redirects me vodafone support page, how can I regain access to nooz.gr?

  Could clear you cookies and cache and check it out.

  • https://support.Mozilla.org/en-us/KB/how-clear-Firefox-cache

  The problem happened when you connect your mobile connection he tries to display the service vodafone page, and it is not updated because of cookie issue.

  Try in safe mode

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Problems with our internet connection

  Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

  The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

  I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

  If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

  Here's how:

  1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
  2. Right click on the wireless network connection and choose disable.

  That's all.  You can always reactivate if you wish.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).

• Portege R500 - problem with roaming

  Hello

  I use the laptop Toshiba Portege R500. Computer works well, however I had a problem with the connection to the internet from abroad. I use Novaltel Moblink application and modem integrated - on the territory of the Poland, internet connection is working without problem, but abroad there is no link (tested in Czech Republic and Austria). Operating system - Windows Vista Business SP1. When the external modem (PCCard) and GlobeTrotter application is used, then internet woks without reservation.

  Any help will be appreciated.

  Jacek

  If I understand the problem, you are the Poland and this card doesn t work in other countries.

  What is your mobile card is activated for use abroad?

  For me it doesn t look like a laptop but problem the problem of the map.

  You contact the mobile service provider and ask for clarification!

• Portege M400 problem with virtualization

  I have problem with VT in BIOS VT is enabled, but Windows 7 do not. I instaled XPmode, but when I try to start I get connect this virtualization is disable. I don't know what I do mus.

  Hello

  What CPU you have in your Portege M400?

  Virtualization is a function of the motherboard (BIOS) * and * processor type. The fact is that not all processors are dematerialising and then you should check the specification on the first Intel page.

  Check this box!

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!