Portege M400 - shoots of cursor to bottom left

Similar Questions

• Portege M400: How to configure command in Vista buttons

  Hello!

  Can someone tell me how to use the buttonsetting.ini to configure the buttons with the TBSbtnSt.exe.
  Best result would be to get the Coursor and Rotation of the display lid buttons to work under Vista.

  Thanks for the tips!
  Jochen greetings

  Hello

  On the European driver Toshiba page, you will find all the Vista drivers required for a Portege M400.
  There is also a Support Button driver and this driver allows you to customize and TOSHIBA special button preset settings.
  There is also a Tablet PC for Vista Extension Package!
  This package installs a range of important public services and contains this apclations:

  TOSHIBA Rotation utility: Set the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.

  TOSHIBA Tablet PC buttons driver: You can dedicate the buttons on the tablet to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.

  TOSHIBA accelerometer utilities: These utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• Portege M400 recovery English CD

  Hello, I was hoping that someone could help me. I just bought a Toshiba Portege M400 a guy on eBay. When I received it, all the manuals were in German, but the operating system and the programs were in English when I turned it on. So I decided to test the recovery CD to see if it would work, because I knew that I would probably need it in the near future. However, when I installed the OS was in German, all toshiba programs are in German. I sent the guy I bought it said to contact toshiba and see if they would be able to send me a recovery CD which is in English. I hope someone can help me coz Ive has now been left with a tablet pc that I can't use coz I don't understand German =)

  Thank you
  Gary.

  Hi guys

  I get the same info from the ASP in my country. You can get the Toshiba Recovery CD in the same language, where the laptop was purchased.
  If you want to use another language of the OS, so you need to install the operating system from the original CD of Microsoft and then you can download and install the necessary Toshiba drivers on the site of Toshiba driver.
  By the way. Each manual user in all languages, you can also download from the Toshiba site.

• Vista on Portege M400: mouse keeps blinking

  Hello
  I installed Vista Ultimate on a whole new Portege M400.
  The mouse cursor does not stop flickering.

  He replaces briefly about 2 times a second form the usual arrow of the 'blue circle', indicating a change of context.
  No idea why and how I might solve this "feature"?

  Thanks in advance

  To be honest, I have no idea why your cursor blinks.
  But we're not sure, this laptop comes with Win XP, and I assume that the mouse work correctly on XP installed. Am I wrong?

  Well, in this case, there must be something wrong with the software.
  Maybe you have installed the drivers of Toshiba together in the wrong order or some drivers are missing. Maybe the graphics driver must be updated. Who knows?  :|
  Issues are rare and it of necessary to study!

  Please install all drivers as mentioned in the Toshiba installation instructions txt file that is located on the driver page.
  Then update the Vista of the State!

• What's the power adapter of Tecra M4 compatible for Portege M400?

  After the failure of my Tecra M4, I bought Toshiba Portege M400. They batteries are the same.
  How compatible are adapters for machines?

  If they are compatible, for example can use one at work and one at home?

  Hello

  You can use them for both machines as the adapters have almost the same current. In your case, you can instantiate your idea with the help at work and another at home.
  I have 3 adapters that have classes 5A and I can drive almost all of my toshiba´s who need 15 v input voltage.

  You can also check current glancing at the bottom of the machine on this small silver sticker. Then, you can be absolutely sure.

  Welcome them

• Portege M400 EZ5031 - not see HD disc format

  When the Portege M400 EZ5031 formatting I do not get to reinstall the windows XP or Vista, it reads door CD/DVD, the installation, but it is not HD, it says that the media do not exist in the computer. the solution has been ultilizar the windows98 which recognizes the hd and he left to install, but it does not leave to update vista to XP, or to her him.
  How to do?
  Blue screen.
  PS. Sorry my inglish. I'm Brazilian
  Please help me
  [email protected] mail and MSN me.

  Post edited by: barth_rj

  Try to access the BIOS and to set the default settings! Don t forget to save changes!
  Then boot from the XP CD and try to install it again!

• Portege M400 system hangs after Vista system restore

  My system crashed by doing a system restore. Now on startup it gives errors. When I boot from the CD, I go for the choice of the partition to install on and there is no partition, and it has this error:

  No hard drive found. Click on load a driver to provide for installing mass storage driver.

  I went to Toshiba and Microsoft for help. Or can direct me to the right solution. I can't find my recovery disk. I have just the windows installation disc. Is there an easy fix for this?

  * original title - cannot fine partition on Portege M400 during installation of Windows Vista Business 32 bit.*

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  For any problem, reinstall Vista, contact the manufacturer of your laptop.

  Here is the General info on reinstallation of Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• connection to 74.50.117.107 appears in firefox at the bottom right or bottom left on google.ca site why?

  login to 74.50.117.107

  appears in firefox at the bottom right or bottom left of the screen as a text overlay when I go to the home page of google.ca why? Google search so that it is not much help.

  Hello, this looks like a problem possibly caused by malicious software on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also go to the windows control panel / programs and remove all toolbars or software potentially unwanted here and made a complete analysis of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• Picking and Portege M400 displacement causes the crash and locking of the

  I have a new problem with Portege M400, which began a few days ago.

  If I pick it up or move it, then it will crash or lock up. I wonder if anyone has any idea as to what may be the cause of this and what can be done?
  My only guess is to replace the hard drive?

  Thank you
  Greg

  > Turn off accelerometer does not help. Internet research indicates that it is possible a motherboard problem. Replacement motherboard solves problems for about 6 months to a year, then it returns.

  I doubt that it could be a motherboard problem, what the gbaniseter say this happens when it pick up or move the m400, then it will crash or lock up.
  This seems to be a problem of HARD drive and it s nothing uncommon who, after a long period of use of the disk HARD start HARD drive malfunction is a sensitive device and can die because of the physical restraint
  Replace the HARD drive and check if the problem would happen!

• Portege M400 - cannot install OS or restore an old image

  I have a portege M400 and im hardly set any operating system of windows on them. When it gets to the stage where he asks what hard drive to put in place the windows files to, it does not detect the drives.

  I also have an image on a hard drive that I use a universal driver restore program to restore to any laptop regardless of the make and model and which also blue screens after the logo of windows xp when it starts up. The toshiba is the first laptop that I fell on this issue.

  The BIOS is currently 1.8 I think, I can't even put the hard drive in compatibility mode or AHCI.

  im a little confused about restrictions of this laptop.

  Can someone guide me on what I need to do to install windows on this machine please?

  Timox is right: the RAID driver must be added during the installation of Windows XP.
  During installation, you will be asked to add 3rd third-party drivers. As I m not wrong not you must press F6 to add the RAID driver.

  Very important note: do not format the HARD drive once the RAID driver has been added because this would remove the RAID driver from the HARD drive and installing Windows XP will fail again.

• Need driver Win XP LAN for my Portege M400 network

  I have a Toshiba Portege M400 PPM40E, I managed to install Windows XP on the computer.
  I can't access my cable network.
  The wireless works well.

  What is the driver.
  We're talking about Gigabyte Intel 10/100 network documentation

  You can find the LAN driver on Toshiba download page-
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Very important is that you are looking for your old model Portege to archive, in order to choose option Archive under product type.
  I checked, and version 9.2.24 is available for download.
  Can find you it?

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• Portege M400 - Windows XP cannot find the hard drive

  Hello

  Ive got a Portege M400 who im looking to get a new one, I never had the Tablet XP CD so im trying to install using an XP Pro disk, but whenever I get no hard drive can be detected and I tried another disc of publishing house also.

  Ive looked for SCSI / SATA drivers but can only find RAID drivers which are not good for me.

  I hope someone can help me

  Thank you

  Hi wacksonjackson,

  Why these RAID drivers are not good for you? Windows XP requires RAID drivers if your laptop is RAID controller and there is no other choice to install XP from a normal Windows XP disc. Then download the RAID drivers on the official website of Toshiba. Either you create a new installation with the RAID drivers disc using nLite freeware tool or you copy the drivers on an external USB FDD and load them during the installation of XP.

  Also check similar topics here in the forum. You will find hundreds of similar topics on SATA and RAID drivers.

  Check this box!