Portege M800-108 - LAN does not

Similar Questions

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• Portege M800 - Chicony Webcam does not work

  I have a Portege M800 and the Camera Assistant Software simply does not work.

  I upgraded my Vista 64-bit Service Pack 2, I reinstalled the driver several times and I downloaded the latest version of the Camera Assistant Software from the Web from Toshiba site and nothing worked.

  I get a 'preview of no.' when I load first it and 'Graph making Fail' when I go to the video.
  However, the only thing is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  Please help me!

  Hello

  > The only thing however is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  This means that more different applications have access to this camera. Is this good?
  I think that is the question!

  In your case, I recommend you to disable the webcam software in msconfig-> Startup tab.
  In addition, you must disable the MSN also in msconfig. The point is that only an application that uses and sharing the webcam should run in the background of the OS.
  I think that this would avoid problems with other software

• Re: Portege M800: driver WebCam does not support the internal mic on the 64 bit OS

  Hi all!

  I have the problem that the internal mic in the webcam (Chicony) does not work in 64-bit (Vista or Windows7).
  Does anyone have a solution for this?

  Best regards
  Sven

  Hello

  How did you test it?
  Have you checked the settings in the software assistant webcam?

• LAN does not work

  Hi all
  I'm having a R61i...
  I have downgraded to Windows XP, Vista...
  After the full and running the Windows XP installation my LAN does not work...
  Someone please help me out of this situation.
  Thanks in advance...
  Neila

  To solve the problem of the LAN...
  Installed ora9ww.exe of pc.ibm.com Web site...
  Thanks for the help everyone...

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Portege M800 - multimedia keys do not work

  A week ago, my laptop M800 multimedia keys stopped working. They does not light either. I tried the fix Package of added value and that doesn't seem to work for me. I downloaded TAVP but nothing happened.

  Anyone have any suggestions on how to make the buttons still works? Thank you. I run on a 32 bit OS (if you need to know).

  Hi l_vasic,

  Have you checked the BIOS? AFAIK you can also enable or disable these keys to enlightenment. It must be enabled

  Otherwise, it would be interesting to know what operating system you are using.
  Have you downloaded package of added value for Portege M800?

• Portege M780 finger touch does not

  Hello

  I have a Portege M780 and Windows 7 x 64.

  My laptop recognizes the pen and a point of contact devices.

  Can I use the pen is fine, no problem with that. But finger touch screen doesn´t of work. I go to the control panel and finger touch is enabled.

  I have download Wacom touch dual drivers for W7x64 web technical support Toshiba´s, but I can´t install it because when I try it says '' unsupported '' platform.

  Could someone please help?

  I have download Wacom touch dual drivers for W7x64 support Toshiba´s web

  Where did you find this 64-bit driver?
  The Toshiba European driver page does not touch Dual driver for Win 7 64 bit, but only for Win 7 32 bit

  

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Cannot register Portege 205 - serial number does not exist

  I can't access path by recording my Portege 205 on Russian site as my second notebook.
  Serial number does not exist has been the answer.
  What can I do to fix this?

  Hello

  Has used the right serial number?
  Please recheck the number on the label that you will find at the bottom of the unit.
  Please don t mix letters and numbers. Sometimes people mix the 0 and o for example.

  But if you think you typed a number and recording not work so I would recommend contacting the Toshiba service will partner in Russia. Technicians can finish the registration process.

  PS: I hope that you bought from the computer store and not somewhere in the dark backyard ;)

• Satellite U500 - 11G - wireless LAN does not work

  Please could some help me because I have a problem with the Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  Whenever I turn on my laptop in the seem to do not to work. You put the laptop restarting and it works I tried to talk to the pc world, where I had the laptop but I seem to be hitting a brick wall with them.

  I had some other Toshiba laptops and never had this problem. I also will not download the date is

  Sometimes every reboot of the router can help. ;)

  Can you detect some other router in your area?
  Do not forget that the same protocol is enabled on the router and laptop.
  Often the small error in the WLAN settings is responsible for connecting Wireless does not.

• LAN does not work on my Satellite C50D-B1017

  Hello

  I have a C50D - B1017 AMD 2100 E1 Satellite
  It allows to work very well with the wired connection, but now it doesn't show even the Ethernet driver in Device Manager and it is set on in bios
  I have ' tried to reinstall the operating system is windows 7, I tried both x 86 and x 64 still the same problem, I tried default and nothing has changed
  still does not feel the integrated lan
  PS: the WiFi is fine

  I hope someone could help me

  Best test you can do is to set the BIOS to default settings and install the original version of OS that you got with your machine (recovery).
  If the LAN doesn't work yet (not recognized in Device Manager) it is possible that there is little material related issue.

  The warranty is still valid?

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site