Portege M800 is now Satellite U400

Similar Questions

• Satellite U400 rotates much more slowly now

  My laptop Toshiba Satellite U400 running little slow and maybe because I have old drivers for:
  * Intel(r) mobile 45 Express Chipset series controller processor to DRAM - 2A 40

  Yes because it shows that I have the version for this: 8.7.0.1007 * but the * NEW version * is: 9.1.1.1012 *.
  Where can I get these new drivers please?

  BCZ like I said earlier, my laptop is slightly more runing slow now.

  Thank you.

  > Yes because it shows that I have the version for this: 8.7.0.1007 * but the NEW version is: 9.1.1.1012
  > Where can I get these new drivers please?

  You have already posted a similar question here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=176346

  I think you should follow only a single thread to avoid misunderstandings

• Satellite U400-14 b turns off and now it won't start

  Hello

  just got a new Satellite U400 this week.
  Worked perfectly the first days, and then last night, it just turns off and now it won't start.

  I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
  I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

  Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

  The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

  help please...

  Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

  If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

• Satellite U400-131 crashed while the screen of the BIOS udpate - now black

  Bios Update crashed my laptop Satellite U400-131, now I got the black screen and don't know what to do?

  Someone knows how to fix this?

  Thank you

  Vries Matthijs

  This bad s Companion
  It was the worst case that could appear wile BIOS update.

  There is not a lot of things you could try
  In your case the ASP must be contacted in order to check the machine and the module ROM where the BIOS is stored

  If you're lucky, while the ROM module must be flashed again and the laptop should start again if the worst cases the motherboard must be replaced.

• Portege M800 - Exposed sensitive Touchkeys does not work

  I am owner of the Toshiba Portege M800-105. Everything done his work. After 2 months working on it, my sensitive touchkeys exposed next to the POWER button does not work. After that I uninstalled 'Vista-value-added-package' everything works correctly. Why? Now my FN keys do not work or are disabled. Why?
  Before uninstalling the package, the first button next to the power button had to function to turn off the backlight of the Logo, the touchkeys senitive one of my touchpad. NOW he cut the sound! Weired fairy if you aks me. How do I challenge my buttons up to factory settings and make function keys FN?

  I reinstalled the value added package again, and have the backup problem as before: the first two buttons next to the power button does not work!
  Unter the Application: Thoshiba Button supports, for the first two buttons there are no keys depositd/marked so that I can change the configuration here.
  FN keys work after installation of the package, but not the sensitive keys! Please who can help me?

  Value added package has small programs. One of them is the Toshiba button Support. Walker I have uninstall it everything works. When I install it, nothing works.

  Thank you for the help on [email protected]

  Post edited by: Togan_1

  Hello guys

  This is really strange. I put t really know what happen on your laptops. The fact is that these buttons are controlled by the software. If I remember well he called support Button or a button control and she is part of the package of added value.

  VAP contains several different tools and utilities. When you remove the VAP, it will be removed the responsible application of the functionality of FN (Flashcards), and this is the reason why the FN doesn't work anymore.

  So, theoretically everything should be OK when you install PPV again. Again theoretically. Why you still have this problem I put t know and I don t believe that no one can say for sure. Maybe some registry entries are corrupted now? Who knows?

  I presume that you don t want to use a more radical solution and do clean install of the new OS, but it can certainly help. With own OS pre-installed (factory settings) everything works well again.

  In the end, I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all the buttons work correctly. I always use the Vista version and I n t made no changes. It works well.

• Portege M800-105 - output HDMI for XP driver?

  Hello

  I have a question that belongs to the HDMI output.
  I put Windows XP Home on my Portege with all the driver from Toshiba support page but my HDMI output does not work.

  Now, I saw that there is a driver for Vista called output HDMI Toshiba.
  Anyone know a driver called like this for Windows XP?
  Or does anyone have the same problem with XP but the HDMI does not work?

  I hope someone can help me with this problem.

  THX

  dschumacher

  Hello

  As much as I know, that he is a driver Intel High Definition Audio HDMI.
  I m not a M800 owner but I ve got a Satellite U400 with HDMI output and installed XP.

  To be honest I didn t notice any yellow exclamation in my device manager but I installed the page Intel's Intel High Definition Audio HDMI driver
  http://www.Intel.com/support/chipsets/sb/CS-009244.htm

  Maybe this site will help you

  But note; Some features of the laptop not available in Win XP, but only under Vista!

• Defective screen on Portege M800

  I bought a PORTEGE (M800-107) in 2009 and before the expiration of the 3-year-old warranty (2012), the screen went black all the time.
  I sent it to the official service of TOSHIBA in Greece (called "IDEAL his '), who fixed it in about a month (and after two attempts).
  A year and a half later, the screen went black again. Now they ask me 500 euros for the replacement of the screen. Of course I won't give all these money.
  Portege was the 3rd Toshiba laptop, I used. I chose it because I wanted something powerful and professional. The irony is that the more expensive model has exploded sooner than the cheapest.
  However, it was the LAST ONE on your part.

  PS: in order to take my laptop (without attachment), I have to pay 30 euros for check technicians!
  Really, you know someone who goes to the service for fun? Or I am responsible for the failure of your model?

  Hello

  To be honest I m was really asking you this display problem. Portege and Tecra are the best notebooks of Toshiba business line and for years, they are known as products of high quality with the best material.

  Anyway, sometimes the best products have problems and be in trouble. Similar things happen with all technical products. I know that's enough damage and angry, especially in the time when you need your laptop.

  Maybe it sounds stupid now, but maybe you can buy view on your own and find someone who can exchange it for you. I did it for my friend a few years ago. We purchased watch on eBay and we exchanged it alone. Of course on our own risk.

  Bye and good luck

• TrueSuite Access manager needs fingerprints - Satellite U400 driver

  Hello

  Whenever I start my new Satellite U400, TrueSuite Access manager says that the drivers are not installed for the fingerprint reader and try to install them again. Even after I install TrueSuite Access Manager, he asks me to reinstall the driver. I'm currently ignoring this but it bothers me.

  "TrueSuite Access Manager on Portege M700 - 13P"asked the same question and answer. But I did not understand what means TPM.
  > Okay - it just stopped.
  > I installed the TPM secure and the problem disappeared...

  Can someone help me?
  Shinya

  Hello

  On the European driver Toshiba page, you will find a new v-Fingerprint Software 7.10.1.2
  Remove your old software from the system. Then clean the operating system using the CCleaner (it of free). Reboot several times, and then install the new fingerprint software downloaded.

  Work

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.

• Have 4 GB of RAM on Satellite U400 but says OS only have 2 GB

  Have recently downgraded notebook Toshiba Satellite U400 (model PSU44A-00J00C) of original Windows Vista business to Windows XP Pro (pack 3 update service) assistance of the system recovery discs. Have 4 GB of RAM installed on the laptop with 32-bit system and was reading that this amount with Windows Vista, but now the figure has decreased!

  I got the digits in the information system:

  Total physical memory: 4 GB
  Available physical memory: 2 GB
  Total virtual memory: 2Gb
  Available virtual memory: 1.96 GB

  My available physical memory should not read at least 3 GB? BIOS is reading at 4 GB. Have updated the bios and chipset without change.

  Want to tighten a little more memory to the computer, since I installed it - is the best I can get 2 GB?

  Thanks for your interest, look forward to your response.

  Hello

  Start the DirectX using the dxdiag command.
  You will find a few details and the info about the system.
  The news of RAM should be available as well check what it says DirectX.

  PS: Win 32-bit must be present about 3.2 GB of RAM. It's max and limited by the 32 bit OS.

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• How remove "preinstalled" McAfee Internet Security of Satellite U400

  Hi guys

  I just reinstalled Windows XP using the recovery disk if the computer is now as it was when it came from the factory.

  My Satellite U400 native with a free subscription to McAfee Internet Security 30-day. Now that I have reinstalled Windows XP the * McAfee Internet Security Configuration * + icon + has reappeared on my desk.

  My question: * is McAfee Internet Security installed in my notebook? *

  I still have a brochure of McAfee initially provided with the computer that says + Internet Security Suite preinstalled on your Toshiba +. What does that mean? For me + preinstalled means + we + installed by Toshiba before reaching the consumer. However, if McAfee have in fact installed on my laptop, it displays in the list of programs installed under "Add/Remove Programs" in the control panel? I checked that list but McAfee is not there. Is not under 'Programs' in the menu 'start '. So, is it actually on my laptop? Or anything else I have McAfee is little set up the icon on the desktop?

  I need to know if McAfee is actually installed on my laptop (and if it is, how to get rid of her) because the other software I use is not compatible with McAfee - I tried to use both at the same time in the past, but neither worked well.

  Sorry guys, but as you may have noticed, I am not a computer person, so would really appreciate your help.

  Thank you

  Hello

  I guess this will be installed automatically by Microsoft.
  It s called McAfee Security Scan Plus.
  I updated the OS to the window, and this appeared on my laptop as well.
  You can uninstall it if you want, but I wouldn't recommend it because it was such good protection to new malware and spy from the internet.

  But if you want to remove it, then you can find the uninstall exe in all programs-> McAfee Security Scan Plus-> uninstall

• Satellite U400 will not usually start upward

  Hi all

  I have a Toshiba Satellite U400-217 (PSU44E) running Windows 8.

  Worked fine until a week ago. Now, when I turn it on, the lights are, there is a memory hard drive spin (1 second) - and then nothing. Above the keyboard lights stay on, but the screen remains black.

  I read a use Reset where you take the battery and the power cable on and press and hold power for 30 seconds, then plug the power cable in, starting at the top, stop, reinsert the battery and start again.

  However, the machine still primer not after 30 seconds the hold button. I always get just the lights and nothing else.

  However, the machine will start usually fine on an attempt to out all 30 or more.

  It's boring - ideas or suggestions very welcome.

  Thank you very much

  KaiBosh

  > However, the machine will start usually fine on an attempt to out every 30 or more.

  In my opinion, you should first check the HARD drive
  A friend of mine installed Win 8 on the new computer laptop from another manufacturer
  After a while that the laptop will not start I thought its something wrong with the card mother, but in the end it was just a HARD drive failure

  To be honest I n don't know if his only problem disk HARD but in my opinion, the HARD drive is one of the first pieces that need to be checked
  OK, in the worst case, it could be possible that dysfunction of this mobo.

• Satellite U400 - big noise from cooling modules

  Hello

  bought a few months ago Toshiba Satellite U400 and everything was perfect, and I bought it just because I don't like the sounds.
  When I surf the net I love that he's quite, but these last 5 days he began to ring.

  Toshiba U400 works and it should be for many 'Air' on the side and its just all the time, even if I open IE or MSN or anything like that either, and before she just made some time, but now he often does.

  Please help me because it's very embarrassing and it sounds too, and I don't like it, why this departure to East happened now and not before? and what I can do about it?

  thnx.

  Hello

  What you can do?
  Well, first you must make sure your modules cooling holes are free of dust.
  I recommend to use the jet of compressed air to remove dust of grids and cooling fans.
  In most cases the dust prevents the flow of air that causes a higher temperature and therefore the propellers would turn faster.

  Secondly, you can change the settings to more battery as energy saver.
  If you are using Win XP, then you should check the Toshiba Power Saver.
  Here, you can assign the CPU, the speed of treatment and performance at a lower level of cooling

• Satellite U400-135 overheating

  Hello

  A few weeks back I bought the new Toshiba Satellite U400-138 and now I feel it is a lower design due to numerous complains that I found one here in the forum support or by people who have tried to deal with this series.

  Fist of all the overheating problem becomes not affordable as I'm about to lose my fingers due to the extreme heat comes from the lower level of touch pad! In addition it usually takes more than 7 minutes to get the login screen of windows while beginning to the top of the window and when you access the window continues to display the CPU usage almost 100% long just by clicking the internet explorer, so I can't do anything except wait (it's killing slow) and when I compare with my old P4 desktop , according to me, how I was wrong when I decided to go to the U-400!

  Today I've decided to take the laptop to the Toshiba dealer and when I was there, I tried to touch the lower part of the availbel for similar in the showroom model and it was very hot and when I asked the sales man there he informed me that there are many customers reported the same complain so I referred me to their service center for inspection and I'm so annoying now because my new laptop will be served after only two weeks and I think that this model is a design of lower quality and the only way to get rid of this problem to get the same replaced by something else?

  your valuable comments is highly apprciated.

  Salvation will be

  I have a U400 too. It s a U400 which belongs to the series of PSU40E.
  I use two BONES; Vista and XP.

  Initially the Vista started slowly, it was not too slow but slower than Win XP.

  I studied a bit and found a solution;
  First of all, I discovered that many background processes and apps have loaded early in the boot process in MSCONFIG, you can find these applications.

  I disabled some unnecessary programs (for me) and the notebook starts up much faster.

  Moreover, I noticed that Tempro update tool helped me a lot.

  So please check these two proposals.
  I don't know that it could help you...

  Regarding the temperature more high touchpad;
  Well, my touchpad is also hotter than the rest of the cover of the laptop but is nothing unusual because cooling modules are placed under the touchpad and the left side is warmer due to the dissipation of the heat of this side of the laptop

  If you shouldn't be worried; It is not unusual

  Bye & have a nice day