Portege R400 - A2DP profile does not work using BT Stack 5.10.12

Similar Questions

• Smartphones BlackBerry of RIM blackBerry 9220 curve - vibrate profile does not work.

  Hello RIM! :

  I have my Curve RIM 9220 for a month half and suddenly vibrate profile does not work.

  I tried the soft reset, Double Soft Reset and finally what I hated the most, is the Hard Reset.

  This phone is ideal, but with this question, I might think twice. Please help RIM. Helpsmilie::

  Hi PinoyAkoBakit,

  Welcome to the support community!

  Can you please clarify what you mean by rebooting to hot, double soft reset and hard reset?

  I would say that your database of sounds/profiles of compensation and set up your notifications again manually, without restoring these settings from a backup file. This article provides the steps to do this. 'How to clear data from the BlackBerry Smartphone user' http://bbry.lv/JtQKcw

  If this does not resolve the problem, try to back up your data and perform a clean reload of your BlackBerry® Device Software. For additional instructions, see the following KB articles.
  For Windows®: "how to perform a clean reload of the BlackBerry Device Software for Windows' http://bbry.lv/GI9beY
  For Mac: "Perform a clean reload of the BlackBerry smartphone application software on a Mac using BlackBerry Desktop Software" http://bbry.lv/J0UN1U

  Please test to make sure that the problem has been resolved before restoring all the data from your backup file.

  I hope this helps.

• Drawing a custom profile does not work for me. It works for you?

  Drawing a custom profile does not work for me. It works for you?

  I can only apply on an existing line, but cannot make a new one with the selected profile. In fact if I change the profile other than the default uniform I also can't draw a new stroke with any other width than the default 1 point. This does not seem normal.

  Use the SC5 on a PC.

  You have "Art has basic appearance nine" checked in the appearance Panel Menu? If Yes... Clear the check box, and then try again.

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• Portege M800 - Chicony Webcam does not work

  I have a Portege M800 and the Camera Assistant Software simply does not work.

  I upgraded my Vista 64-bit Service Pack 2, I reinstalled the driver several times and I downloaded the latest version of the Camera Assistant Software from the Web from Toshiba site and nothing worked.

  I get a 'preview of no.' when I load first it and 'Graph making Fail' when I go to the video.
  However, the only thing is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  Please help me!

  Hello

  > The only thing however is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  This means that more different applications have access to this camera. Is this good?
  I think that is the question!

  In your case, I recommend you to disable the webcam software in msconfig-> Startup tab.
  In addition, you must disable the MSN also in msconfig. The point is that only an application that uses and sharing the webcam should run in the background of the OS.
  I think that this would avoid problems with other software

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• For Portege 3490 AC adapter does not work with the Satellite A100-159

  I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

  Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

  Thanks in advance!

  Hello

  I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
  I think that the card for Portege 3490 adapter is not compatible with Satellite A100

  That the two car/truck/Air 120W laptop charger must be compatible:
  PX1237E-1NPO
  PX1235E-1NPO

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Portege 3500: FN key does not work

  the FN key is not working and when you start get the recovery of the thotkey failed

  What function of the FN key doesn't work?
  If the switch show FN + F5 n t work buttons you need to install utility for display devices access keys. If the wireless shortcut key does not work, you need to install Wireless hotkey.
  As you can see, different applications and drivers are required to use different Fn keys.

  But common modules must be installed always, because this driver is important for every application from Toshiba. Also, be sure to reinstall the utilities.
  Visit the Toshiba for the necessary drivers.

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• Popup JavaScript does not work using global variables?

  I have a menu region "References" which contains links to several pages pop up indicating the access codes of valid data filtered for the location of the user. I tried to make this work in another page by changing the references page to global variables variables / application, but it does not work. Can anyone suggest a work around? Here is the code I use:
  
  Target URL in link

  javascript:callEmpPopup('P1050_ORG_ID')

  JavaScript

    function callMyPopup (formItem1,formRow1) {
      var formVal1 = document.getElementById(formItem1).value;
      var formVal2 = 1;
      var url;
    url = 'f?p=&APP_ID.:1056:&APP_SESSION.::::P1056_FACTORY_ID,P1056_ROW:' + formVal1 + ',' + formVal2;
    w = open(url,"winLov","Scrollbars=1,resizable=1,width=1000,height=600");
    if (w.opener == null)
    w.opener = self;
    w.focus();
    }

  Blair:

  Use a "Hidden" type page element defined on page 0 instead of a part of the application.

  CITY

• FIFA11 does not work using the ATI GPU on Satellite S70 - B

  I have a portable Satellite S70 - B. with amd fifa 11 video card does not work, but with the video card intel it works.
  Why?

  Despite the solution/solution posted by above user, an update of the graphics card driver could also be an option for you to my knowledge, that a lot of games does not start because of the incompatibility between the game and the graphics card driver