Portege R600-4201 - t - it work properly with Windows 7?
My R600 is on XP Pro SP3 since new and works very well. However, there are features of Windows 7 that I would use.
Has anyone here been through? What were the problems? Face recognition has worked? Fingerprint reader?
How is above all performance on Windows 7?
Thank you
Thanks for the comments
Tags: Toshiba
Similar Questions
-
I click on the game icon and the game window and page layouts start charging. But the process of loading stops at halfway and I get the following message: "Mahjong Towers Eternity has encountered a problem. Please make sure that you have the latest version of the game. I have the only version of the game. In addition, once I have delete the message I can't delete the game window unless I'm using the Task Manager.
Hi martham
Thanks for posting in the Microsoft answers site!
It is a standard error message coded in the game that occurs when MTE there is a mistake, for all sorts of reasons. It is a game crash, not a drive failure. You don't need to upgrade to a new version of the game. If you have downloaded a lot of tilesets and backgrounds, clean those out of your game directory. And if you have a large number of layouts in your Favorites list, delete the 'my' file that is located in your game directory
In addition, check the compatibility of the game with Windows 7 from the link below:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Try to install the game in compatibility mode and check if this solves the problem.
See the link below for more details:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsFor more assistance, please visit our Bigfishgames forum:
http://forums.bigfishgames.com/games/list.page
I hope this helps!
Kind regards
Gokul - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
economy on screen display timeout monitor energy function doesn't work properly with windows 7
running Windows 7 ultimate 64 bit RC. When I connect my new LCD Acer X 223 that just built system I have a question. on the function of delay display the screen of the monitor is a feature that goes to a black screen after awhile... to save energy which is adjustable up to 2 hours via the menu of the monitor. The time-out period is supposed to restore the screen a few seconds after a mouse is moved or a key. Is not... restart only restores the display on the screen. Support of Acer said that it is a bug in windows 7. Is it possible to control or to disable this feature of the operating system? It is the first day after the building of the system with the Intel DG45ID motherboard and Intel Quad processor. I found that running a webcast in the background keeps the system of locking me... when a web show is still active, the screen turns off after a certain time (time determined by osd menu timeout on screen) but function returns normally when a key is pressed or the mouse moved. Without this or something else running the keyboard or mouse cannot return to the screen.
If it's a bug, Acer will repair before Oct22nt. I would look to Windows Update for the news about the availability of driver for the Acer chipset.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.
Thank you, and I take back what I said about Firefox getting worse.
-
arise pro working properly with the Quicken Premier
I plan to do a surface pro but unable to learn if Quicken will work correctly on this subject. Microsoft may know, but they of course don't tell you much about many programs other than their compatibility.
I guess it's good marketing, but it is very bad customer relations.
I remember with W95 how I had to prove all the few weeks that I had bought my program and that it was not a pirate. After several checks, I started next with thieves and hackers.
MS provides an easy to find a place to my simple question: will arise pro working properly with Quicken home Prime Minister.Henry
I plan to do a surface pro but unable to learn if Quicken will work correctly on this subject. Microsoft may know, but they of course don't tell you much about many programs other than their compatibility.
I guess it's good marketing, but it is very bad customer relations.
I remember with W95 how I had to prove all the few weeks that I had bought my program and that it was not a pirate. After several checks, I started next with thieves and hackers.
MS provides an easy to find a place to my simple question: will arise pro working properly with Quicken home Prime Minister.Henry
Hello
You did not mention what version of Quicken Premium you use.
Windows compatibility for any third-party software product is the responsibility of the developer of this product.
See the following links.
Support - Intuit Quicken
http://Quicken.Intuit.com/support/Windows.jsp
Quicken Community Forums
https://qlc.Intuit.com/app/full_page
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT and Windows 7:
http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=quicken%2Bhome%2Bpremier&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14Concerning
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?
RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
How do I know if a site Web Builder software work well with Windows
I create websites in My spare time for a little extra income I wanted to know how do I know if a software will be safe and work Weel with Windows.i ask because I am thinking to buy a new one from the site Builder that's Coming Out and the last thing I need is a computer crashing here is the software in Question self build product review can someone tell a way to ensure that its windows compatible? and if not how to know? Thank you
You'd better post this question in the Forum of Windows answers to the following address
http://answers.Microsoft.com/en-us/Windows
In any case, for compatibility with Windows 7, you can use the Windows 7 Compatibility Center website at the following address
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Good bye.
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7
I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?
Hello Chad,
Thanks for posting your query on Microsoft Community forum.
According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.
Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.
I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.
Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.
Thank you.
Maybe you are looking for
-
On all non-secure Web sites that I visit, it is has unsolicited adds or games if looked at, seems to be in the right place, but have a small "ads not by this site" below. If I hover over the announcement, he will lead me to a site. Firefox is my defa
-
Is there anyone who tries to use the iron with VeriStand Python scripting language? My problem is that VeriStand has not its own interpreter and I have not found a way to run scripts. Thank you all
-
is it safe to delete the temporary files?
a game on MSN games froze the screen. The solution I got was to remove & reinstall Java, delete cookies, temp internet files. I will lose any important data if I delete temporary files?
-
Repeatedly, to a crash program, (different programs), Windows 7 responds with a box dialog error that says "xyz program has stopped working, windows is looking for a solution to the problem." This continues for a while, finally, the error dialog box
-
A little box comes up saying that uxtheme.dll is missing.
Original title: HELP! my computer is a small box appear saying that I'm missing a UXTheme.dll How can I reinstall it? and how has he lost it? Well how he will be missed