Portege Z30 - B - Toshiba picture after change for Linux installation

Hello.

I just bought Portege Z30 - b.

I want to replace windows with linux (fedora I think), I did the windows image by using Recovery Media creator on USB.

So if now I will install linux I delete all the files on the SSD.
Maybe futture I want to reuse windows, can I return to original state by using this USB?

If I install this linux, what happens with toshiba tools accessed through the BIOS/UEFI?

Where can I get windows CDkey?

Thanks for the help!

BTW: great laptop!

can I go back to original state using this USB?

Yes, recovery would fix the laptop back to factory settings.

If I install this Linux, what happens with Toshiba tools accessed through the BIOS/UEFI?

I'm afraid that I'm not sure what you mean exactly with Toshiba tools accessed through the BIOS...

Toshiba tools do not support Linux... you can install Linux but Toshiba software wouldn't. But you can still access the F2 BIOS support and turn the device

Tags: Toshiba

Similar Questions

  • Weak signal after changing for Z3

    Hello

    I noticed that my signal to the SIM 2 location is low after changing to the Z3. My previous phone was fine.

    Can you advise if there are parameters that I can do?

    Thank you

    Macrox

    You should try to contact the Support of Sony Xperia.
    http://support.sonymobile.com/global-en/contactus/

  • Stuck at 50% after battery saver mode have changed for Linux.

    Hello

    When I had installed on my X 1/2 G W7P, I turned on the battery saver mode.

    Later, I decided to change the Linux operating system and has not changed this back to normal

    operating on battery and Linux (Debian) seems only to charge the battery at 50%.

    First of all, it is in fact a matter of strives Windows and second, is there a command

    or option in the BIOS that resets the battery to full charge mode?

    TIA.

    Additional...

    TLP do not work on systems with sandtbridge or newer.

    Which, I believe, includes the 1/2 G X. However, another

    Manager power exists that can work.

  • Toshiba drivers after installing for all users available

    Hello

    does anyone know if the drivers of Toshiba (value added Package, utilities, HWSetup) are available for all users of Windows 7 and not only for the user who installed the drivers. I configured both users on the laptop and the second user has no record of program with the Toshiba Utilities.

    John

    >... and the second user has no record of program with the Toshiba Utilities.
    Is it so important? I mean when the laptop is configured correctly, both users can use all the tools of Toshiba pre-installed and utilities.

    The two users to have the same status (Administrator / standard user)?

  • No iTunes for Linux installation?

    I just recently got a pi raspberry zero and wised up to see if there was a version Linux to iTunes... I see none, there is only Windows and Mac. I was hoping that I would use it to stream my iTunes one of my MacBook through the pi Raspberry library while I practice on code, because I have decent sound on the screen/TV, HDMI, which is currently connected to my main Macbook when I'm at home, but when I use the Pi, my macbook uses only the lid of laptop screen. I hope Apple realizes a version Linux to iTunes soon, because since windows 8, Windows has become a piece of unwanted software, not worth as games, to make productivity that the Mac does best.

    Tell iTunes comments.

    TT2

  • Portege Z30-A-1FL no longer lights

    Hello world

    My Portege Z30 almost nine no longer starts. There is only a single flashing bright white - one for DC/battery - but other than that: nothing happens :(

    What can I do?
    Thanks for your help and your support.
    BA

    Sorry to hear that

    Portege Z30 is very nice, good looking for Ultrabook and as far as I know the laptop battery isn't removable t s. So the work around common that remove battery and pressing/holding the power button 30 sec long isn t possible.

    In any case, I guess that s portable began to hurt function and localization of the fault will not be very easy. The mobile engineer would generally use a special and software diagnostic test to know what could be the problem exactly.

    From my point of view the question could be linked to the memory problem or malfunction of the motherboard and I guess that both parties should be checked for possible problems.

  • drive has chosen for the installation of softwate

    How can you change the default C: Yup Windows player.

    My C drive is a SSD and I would like to install on another drive, but the creative cloud

    Looks like it still installs on the C: drive

    Looks like the fuse is very large

    Dave.

    Change for Applications installation location

    With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

  • New Bios for Portege Z30 - has Changelog

    Hello
    If someone has tested the new bios (4.20 - WIN (ECB1.40)) for the Toshiba Portege Z30 - A or is it an official change log?
    Toshiba did not alter the fan behavior? The fan isn't fort/boring, but he could kick a little later.

    Concerning

    Someone has already installed the new bios?

  • Toshiba Portege Z30 - A - Accupoint does not work

    Hey there!

    I had a problem with the Accupoint, he moved alone, so I disabled it.
    But the problem is that I have also disabled the two buttons above the key.

    A is it possible to repair the Acupoint or disable without disabling the buttons?

    I have a Toshiba Portege Z30 - A with Windows 10

    Thank you!

    AccuPoint or Trackpoint

    I think it's a touchpad cable problem. Send in for repair.

  • What is the number of keyboard for Portege Z30-A-1E5 part?

    Hello
    I want the Toshiba Portege Z30 A 1E5, but is apparently available for purchase of the German and Austrian sellers with the QWERTZ keyboard. I would like to buy an and Exchange on the keyboard AZERTY or QWERTY (UK).

    However, I spoke with a company that and they can't confirm that they can get a part unless I can provide a reference number of keyboard (they also cannot give me a quote without it), but this number does not seem to be easy to get their hands on without actually having the computer and take off the keyboard and research under! I feel a little nervous about spending so much money when there's a chance that I won't be able to reverse the keyboard.

    So my question is, can someone tell me what the part number of the keyboard is for the a-z30-1e5 portege?

    Any help would be appreciated!

    Kate

    Hi, Kate

    I m wondering why you want to buy a Portege Z30-A-1E5 that isn't available in the United Kingdom?
    The notebooks are pre-installed with a Windows system in different languages. In the case of Portege Z30-A-1E5 available in Germany, the system language would be German.
    The keyboard also supports a different layout.

    Portege Z30-A-1E5 was equipped with a processor i7, SSD 512 GB and 16 GB of RAM disk.
    Very similar Portege laptop, Z30 - has - 1 6 was released in the United Kingdom. Its preinstalled with the Windows system in the English language and English keyboard layout.
    Of course, the hardware specs are a little bit lower (256 GB SSD drive and 8 GB of RAM) but I think that this could be improved is much easier to replace the keyboard.

    However, where you can buy the Portege Z30-A-1E5, I recommend contacting the maintainer authorized Toshiba in your country for replacement keyboard. Guys could control the keyboard of Toshiba law and could perform the replacement.

    Just a note: the replacement must be performed by service provider authorized because of the validity of the guarantee. The replacement must be performed by an approved engineer to keep the warranty valid.

  • Mail does not ask for new password after change

    I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

    This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

    OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

    I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

    So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

    / end of rant

  • Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

    Hello

    I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
    However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

    The SSD 512 that I use is
    http://www.crucial.com/USA/en/storage-SSD-M550

    and according to the
    http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

    It is compatible with the Toshiba portege-z30-a-10w
    I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
    http://www.Toshiba.co.UK/innovation/...jsp?service=UK
    Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
    MU02 version
    http://www.crucial.com/USA/en/support-SSD
    However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

    All ideas

    Thank you
    David

    I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

    I have no why, but install Windows 8 seems to allow the 512 SSD to use

    Hope it will be useful.

    David

  • Generation of recovery media after changing Windows 8 for Windows 8.1

    How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

    Hi @john_f_g ,

    Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

    Software recovery of HP and Microsoft allows you to make only a backup recovery.

    You can order new media disc or USB flash device of here.

    Thank you.

  • XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

    XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

    Hello

    Let us perform the steps below and check out them.

    a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
    b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
    c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
    d. restart your computer.
    e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have toshiba laptop that missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all the other themes are greyed out so you cannot select them,

    I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?

    My laptop will also not me do a backup.

    Try these:
    METHOD 1:
    Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.
    -------------------------------------------------------------
    METHOD 2:

    Try partitioning your hard drive and put your files there.

    1. Start menu search: 'drive '.
    2. click on create and format hard disk partitions
    3 right-click the Local Disk (C) and select shrink.
    4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)
    5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)
    6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)
    DO NOT select the Partition you you saved on files.
    Hope that these answers are useful.

Maybe you are looking for