Porting MIDlet: pauseApp resets the members of the class

Similar Questions

• What port bulk charge and reset the field data, using SSL?  Are there more ports beyond 7002 just?

  Hi, we have short components configuration problems in an implementation of SSL Linux 64.  The rest of the components work, but not the load mass and reset the data domain.  We believe that this could be a problem to port because the environment is locked by defalut.  7003-8000 ports will not be open by default.

  On the side of the design, we have the arguments defined VM as below, which appear correct.

  Djavax.net.ssl.keyStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerClientCert.ks-Djavax.net.ssl.keyStorePassword=***-Djavax.net.ssl.trustStore=/disk1/Oracle/Middleware/user_projects/domains/endeca_integrator_service_domain/security/ssh/endecaServerTrustStore.ks-Djavax.net.ssl.trustStorePassword=***

  any thoughts?

  You can configure the port ranges that short Server will use.  This applies to both ports of the primary for web services (usually 7001/7002 for Non-SSL/SSL) as well as the underlying ports that are listening on the areas of individual data.

  Almost everything is going through the ports of short primary server (7001/7002) to lock things should not be a problem, as the "traffic" would come from the local computer.  That said, by exploiting the essential ingest functionality requires a direct contact between Integrator (or Integrator Server) connection and the data domain.  If the ports are not open and inclusive tent ingestion of a different area, you'll get failures.

  As with anything related to SSL, I recommend always get your sorted environment (open ports, firewall, etc.), then activation of SSL.  If you are not sure about ports AND you are not entirely sure of the configuration of SSL, it can be very difficult to solve the two simulanteously.

  Patrick Rafferty

  Branchbird

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• How to reset the password forgotten for the Airport express

  I hid says on my airport express and I don't remember the password for it. How to reset the password

  If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.

  AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.

  If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express

  Click Edit in the window that appears

  Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.

  Click Show passwords and you will see your forgotten password

  

  If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.

  Airport - access to forgotten passwords

• How to reset the BIOS to the factory for a H8-1110 office setting?

  Hi, I would like to reset the BIOS to the factory setting on my Desktop-H8-1110 and could ' t find the reboot of the system BIOS by pressing the keys PF1, PF2, PF10, PF12, DEL or ESC, and would appreciate your help to advise me what I have to do to reset / restore BIOS to factory settings?

  At any time.

  I am pleased to have been of assistance.

  I read your post on the issue of the mouse, and I don't have a lot of experience troubleshooting hardware non-pilots.

  If I had to have this problem, and after trying the suggestions offered without results, I would be backing up my files and do a factory reset from the PC.

  Who would set operating system of software problems /, and I expect my usb mouse to work.

  If defective remedy the problem, I must say that there is a problem of motherboard of a certain type.

  Have you tried to install the update of the USB3 driver (if it's usb ports 3, giving you problems)?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0006

• Reset the Web GUI on the M600 iDRAC

  Hello

  I have problems of access to the iDRAC web gui on a couple of blades M600 (needed to get the console and re - install the operating system).

  I read on Google that racadm racreset running can solve the problem, but this seems to be only available on of m610?

  When I ssh into the M600 blade I gives me a prompt SMASH CLP Console (v1.08) and can not find everything related to actually reset the interface itself idrac.

  Is it still possible on a M600?  Otherwise, how can we reset the iDRAC interface?  It does not fundamentally on port 80 - unlike our other blades, also M600s.

  Thank you very much in advance for any pointers or direction.

  Thank you

  SoC

  Rob,

  An option to rest iDRAC on M600 is with the CMC. You can connect to the CMC and perform iDRAC reset page "Overview-> troubleshooting-> Reset chassis components. Select iDRAC reset for the corresponding housing option. You can also do CMC Racadm. Run "racadm racreset m - Server -" of SSH or using remote racadm and CMC IP.

  What iDRAC firmware you have on M600? 1.65 is the last FW for iDRAC M600. If you do not have this FW on iDRAC can you update and check the same. You can download the same from

  www.Dell.com/.../PowerEdge-M600

• reset the password on a Dell PowerConnect M6220

  Hello, I'm trying to reset the password on a Dell PowerConnect M6220.  Can connect to the CMC via the https Web page, I don't see how to do it from there.

  Then I'll try to plug a USB serial cable into the console port and reset the password via a console session using teraterm but when I do that all I get is a white screen.

  Parameters of the series are:

  Cable: The Null Modem

  Bits per second: 115200

  Data bits: 8

  Parity: None

  Stop bits: 1

  Flow control: no

  Any ideas on how I can access telnet access to the device to reset the DDT successfully

  Thank you

  Kevin

  You can connect to the console port internal to the switch via the CLI of CMC

  Telnet to the CMC, then connect switch-a1 (a2 or b1 etc. etc.)

  This will give you the > invites, so either delet the startupconfig and recharge it, or put into you own username and password - remember that you can set on the schema of the interface of the band or band in slecting the appropriate interface

• Port of native queue, the AA and the voice call

  Hi all

  Recently, I met a challenge problem, the customer got a busy tone when they called the number of hunting. We have AA 9 connection of the unit-based, we also have the queue of the native call (Hunt). When the client calls the DID number that we published, the number called will be translated to 100 on H.323 voice gateway, and then click CUCM and directly forward to voicemail (primarily to computer virtual in DN 100). Then the call will be forwarded to CUCM hunting through the connection of the unit to call manager after time control.

  Call routing as follows.

  Dial the number DID of PSTN--> voice gateway (translate PSTN number to 100)--> CUCM--> connection of the unit (call handler)--> native CUCM call queue

  We have a PRI dedicated to hunting, there are a large number of channels available when the question that's happened. In order to avoid congestion caused by the voice port. I added Subscriber connection of the unit so that the cluster CUC for 48-Port voice. Whenever I have reset the port in UC Group, the problem disappeared. Sometimes, there are only 3-5 calls for hunting, but the question is yet. I was wondering is there something wrong with the voice port settings?

  Thanks in advance,

  Eric

  I see, holiday would be difficult, but you can set the static days in the periods of time in CUCM, which is technically the same as in UCXN.

  I guess I see your description of what your question is exactly, are calls arriving is no longer the hunt group of?

• WiFi radio adapter off, the USB ports does not and the Bluetooth adapter is no longer visible... Please help!

  I had my laptop Dell Vostro repaired under insurance in January 2013 after a spill of liquid.  HAAC Ltd. has replaced most of the laptop - but the return, the SD card did not work.  This seems to be due to the engineer he connects not properly and the company recommended it and returned it to me again.  A couple of months, I found my USB was temperamental - so is my built in Bluetooth adapter.   Last month - the wifi does not work for most of the time either so I have to connect to my router by wire.

  This could be a problem in windows 7 - all my problems seem to be related to network adapters.  If it's a hardware problem - does anyone know if it could be another loose connection?  HAAC Ltd. only give a 3 month warranty on parts that seems just a little.  But if this anomaly is due to the production of poor quality - that is not properly connect the laptop then I'll go back their again if they are responsible.

  By the way – there's a switch wifi on the front of the laptop - but is not currently be recognized.

  If anyone has settings that I could check that can help - especially if some inhibit the use of wifi.

  Thank you very much

  Hello

  Your wifi switch not recognized is probably a hardware problem. The rest could be a hardware or software problem.

  Method 1:

  Lets start by doing a reset to coercive. Follow these steps:

  1. Unplug the notebook (remove power cord), then remove the battery.
  2. Disconnect all USB devices and the connections between the USB ports.
  3. Let the laptop only for several minutes.
  4. Then plug the power cord without connecting the USB devices. Then replace the battery.
  5. Plug each device in turn, allowing them to load the drivers of devices one at a time (plug in the appliance and wait its loading all its drivers before installing the next USB).

  The computer recognizes the USB ports? All of them or none of them?

  Method 2:

  Open Control Panel, Manager of design. Click the view tab, and then click Show all devices. From there, you can remove all instances of USB devices and restart the computer to see if the problem resolves. Repeat this procedure with the wireless adapter (uninstall and reinstall, ensuring that there is only one instance of the wireless adapter).

  Method 3:

  Create a new user account by following the instructions in this article:   http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem?  If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.

  Try these methods and post your results here. I'll be here waiting for the results!

  Kind regards

  BearPup

• How to reset the Cisco WRV210 admin password?

  I forgot my admin WRV210 password and I try to hold the reset for 15 seconds button, but it's not as work.how can I do?

  I read this on another post:

  Start by checking the connections, the port - internet on router - modem to the computer 1.

  Reset the router - hold the reset for 30 sec button - unplug the power supply and now the reset - Plug and then release the reset button.

  Now click on start - run - cmd - ipconfig, the default gateway address is the IP address of your router. This IP address to access the router configuration page.

• BlackBerry Smartphones how reset the password in the password Keeper 6.0.0

  Dear members,

  I recently updated my software to device to v6.0.0. After installation, I can't open my password Keeper 6.0.0. I did not have any password set in the application. Now, I want to reset the password. I'm not worth losing data in the application.

  Best regards.

  Pasha

  Just type an incorrect password ten times... it will reset the password for wipe again, goalie all the data ONLY in the password keeper... If you have lost nothing.

• Is it possible to recover the password or to reset the password on a system of 7 Windors?

  I have a system of windows 7 that we do not have the password. He belonged to a frind who was killés in a motorcycle accident. There is no hint on the password and only one account on the system. Is it possible to recover the password or reset the password. We have not been able to locate a password reset disk. We do not know if it has already created a. ! His wife needs to get and to locate information such as a will or accounting information
  Any help would be appreciated.

  Hello Alfred.

  While I'm not the final authority on Windows passwords, I don't think there is a way to reset the password. I think your best bet is to hope he kept important documents on a separate partition. If possible, I would consider doing the following.

  (1) depending on your level of comfort and expertise, remove the hard drive from her computer and hook it up as an external drive to a second computer that already has a functioning Windows 7 operating system. You could then read files on his now "external hard drive' and the search for all relevant documents.

  (2) If you are not comfortable doing this, or it's a phone that you do not have a service manual for, take it to a computer repair shop and ask them to carry out the extraction of hard disk and install as an external drive.

  Its hard disk can be configured as an external drive by plugging into an available USB port, either directly by the use of a hard drive to a USB connector cable, or by inserting the drive into an external hard drive enclosure which in turn plugs into the USB port.

  In both cases, the reader must be able to be read as its not used as a disk operating system, but rather as a simple data reader, for example, D:\Data disk. Sorry its not better.

  Kind regards

  BearPup

• How change/reset the passwords of admin of the auditor and Manager

  I have request Express the listener in a stand-alone installation on Oracle 11 g R2, how do I reset the passwords of Admin and feeder access the listenerAdmin.
  Listener already configured.
  
  Currently when I try to access apex/listenerAdmin I get requests for leave (by default / user/passwords username provided does not work).
  
  Thank you

  Hello

  "The xxxxx in XDB server requires username and password." (if I fill password user XDB) query appears:
  "The server at the APEX xxxxx requires username and password"

  It sounds like you still have active and configured listener APEX XDB HTTP Server to use the same TCP port. Unfortunately, the listener and Server HTTP XDB APEX use port 8080 by default. Configure a service to use a different port or disable XDB HTTP server completely, if you don't need otherwise, to resolve the conflict of port.
  To leave the APEX listener to use a different port, simply start with the apex.port parameter, for example

  java -jar -Dapex.port=8081 apex.war
  

  To change the port of XDBs, you need your user name sys (for example connection with sqlplus under sys as sysdba) and run the corresponding API command, for example

  sqlplus / as sysdba
  exec dbms_xdb.sethttpport(0);
  commit;
  

  where 0 is the value to disable the service completely. Use another port if you rather want to use it and don't want to not use APEX listens on a different port than 8080.

  -Udo

  Published by: Udo on 15.02.2012 15:38

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Is it possible to reinstall or reset the internal microphone of an iMac?

  Some background information:

  27 "iMac 5K (end of 2015) running OS X El Capitan (when the problem started), to give birth to Sierra of MacOS. Also have a Bootcamp with Windows installed 10 partition.

  A month ago, when under OS X, I noticed the internal mic produced some static when you try to use it. Audio messages in voicemails would be static instead of my voice. The weird part? If I switched to Windows 10, the internal microphone works without any problem. I can ask questions of Cortana, I can record voice messages and they read without static electricity. In fact, no matter what I use the microphone internal to in Windows, it works perfectly.

  Sierra of MacOS is out, so I hope that this update may be a BONE would settle the matter. Nope. Internal microphone still does not work on MacOS, but still works perfectly in Windows 10. It is because of this that I am positive the internal MIC is not broken or have a loose wire.

  I went through a few steps to try and fix the internal microphone, such as resetting the SMC... but nothing has worked. Any help or ideas on how to solve this problem would be greatly greeted.

  Hello dear user

  Thank you to use Apple support communities

  My recommendation would be to take it to an official Apple store, workers are espceialists, they might be able to fix, make sure also that you have never removed the water on top of the mic. In my iPad, a drop of water directed the music video of speaker if she never exceeds 30% volume of the music.

  But if you don't have a store nearby, uninstall malware and unnecessary software, make sure that you don't have a program that allows you to change your sound (like Skype) systems, if you don't do that this program has no impact on your microphone. (I used to have Skype but it also makes audio cut so terrible, piano music sounded like heavy metal music, so heavy metal music was like to...) I don't know what to say.)