Ports disabled on HP desktop computer

Similar Questions

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• I bought a new desktop computer.  Can I disable my 13 items first on my old desk and reactivate on my news desk?

  This past June, I bought the first 13 items that I installed on my laptop and desktop.  Now I bought a new desktop computer.  I need to know if I can disable first 13 on my old desktop items and reactivate on the new. If I can how do you?

  Thank you

  Hi Charles,

  Please see this link: connect and disconnect activate Cloud Creative applications

  Kind regards
  Rahul

• My continuous HP desktop computer to go to sleep more I use my computer. I have disabled the option to sleep on POWER SETTINGS, but he continues to go to mode "Eve".

  For the past 2 weeks my HP desktop computer has begun to enter the mode "sleep" whenever I use it. As soon as I turn on my computer it goes immediately into mode "Eve". I would leave it alone for a day or to and it won't happen again. More I leave it alone is more of my time. I tried to change my settings on the POWER SETTINGS, but he continues to go to mode "Eve". I don't know if it's a question of a hardware problem software. Help, please.

  Hi MakCalixte,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can try to uninstall the graphics card or roll back the graphics card and check if it helps.

  For more information, you can consult the following articles:

  Uninstall a program

  Restore a driver with its previous version

  Method 2:

  You can also consult the following articles and check if the problem occurs in safe mode and let us know the results.

  Start your computer in safe mode

  Hope this information is useful.

• How to restore wifi for a Windows 7 on a foxconn 9657AA desktop computer when he was severely disabled a few years ago by an expert?

  The current network is currently hard wired via Marvell Youon eithernet controller 88E8056PCI-E-Gigabite.

  I know it's possible, but as hardware / software novice now have an idea on how to go about restoring the wifi so I can move the computer far the router that is running successfully wifi laptops and ipads.  I can't find the router or any other networks when I try this method on the desktop.  Please let me know if you need additional information.  Thank you a lot in return for your answer.

  What is a desktop to a laptop computer?

  If this is a desktop computer, it is unlikely ever, there was a wireless installation installed in it.  That being the case, you will need to go into a computer store and buy either a Commission of add-in or a USB wireless device.

• Connect my Iphone HotSpot to windows 7 on a DESKTOP computer via a USB port

  I tried repeatedly connection Hotspot from my Iphone to a desktop computer and it does not appear in my network and sharing icon, as a source available on the internet, I have it plugged into my laptop with windows 7 as well and it automatically sees, what Setup I'm missing to detect network, THKS

  Hello

  1 did you change on your computer?

  2. you receive an error message?

  Method 1:

  I suggest you to follow the links and check out them.

  iPhone: System requirements for Personal Hotspot

  http://support.Apple.com/kb/HT3574

  iPhone: Troubleshooting Personal Hotspot

  http://support.Apple.com/kb/ts2756

  I suggest also, please contact apple support canter and check.

  https://discussions.Apple.com/community/iPhone?CategoryID=201

• Having problems with ports USB 3.0 in computer option H8 - 1010 T

  Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

  I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

  Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

  The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

  USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

  @William

  Check out this thread, seems to be the same problem you are having.

  http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

• New HP desktop, Windows8, Ubuntu, UEFI and a desktop computer that is no longer start

  I have a new HP desktop computer purchased just before Christmas, 2012.  Not realizing the problems with Windows8 and UEFI, I tried to load the version 12.1, Ubuntu, and now the Office does not start.

  Here is the chronology of the events:

  1A tried to install Ubuntu linux 12.1 with dual boot NO

  2 once installed Ubuntu, the system would not start and crashes with an error message

  3. accessed in UEFI menu and security disabled for all boot devices

  4 tried to start again, but the only thing on the screen is a picture of Seattle and the system will not meet any keyboard input

  At this point you can power cycle this machine, everything you want, and it puts just a photo of Seattle.  I can't access BIOS UEFI, or anything like that and the machine will not respond to any keyboard input.

  I did some research and it seems that this new version of the UEFI running on this desktop computer will not allow the machine to run anything other than Windows8?

  Any ideas on how to solve this problem?  I don't want doesn't matter what Microsoft anything running on this PC, and want to dual-boot.  I have not the recovery disc for this desktop computer.

  I think about how to solve this problem first becomes the machine to respond to keyboard entries, enter the UEFI and re - enable security this could allow me boot Windows8 still?

  Thank you!

  I finally got the machine to respond to the keyboard.  I found the solution on a linux Web site

  1. turn off the machine by pulling the power cord

  2. remove the battery

  3. press and hold the Power Off button for 60 seconds

  4 replace the battery

  5. start and hold down the ESC key

  BTW, I will update this thing with some notes as this can help someone else.

  The machine is a brand new HP P2-1310.  It comes with Windows 8.

  Try to wipe the hard drive and install linux has been in vain due to the new implementation of UEFI.  At best, I could install linux on a new partition, but the machine does never start the linux OS.  It will start only Windows8 successfully.

  As near as I can tell, UEFI will prevent any OS other than Windows8 currently running on this computer.  See linux UEFI as a kind of security attack and simply prevents the machine to use.  The Open Source community works now this last attempt of MS and PC manufacturers to prevent consumers who buy a new PC to install anything other than Windows8.  Run a search on this issue and you can get more information on the latest status.

  My guess is that sometime in 2013 different versions of linux Open Source will receive the digital signature required to interact with UEFI and load their OS on the new PC, or they will develop a workaround solution.  My suggestion for anyone considering buying a new PC that intends to install linux, immediately after that purchase should consider carefully what is not possible.  Right now I still can't do and I'm stuck now with Windows8.  If I had to do it again, I will not buy a new PC, but rather just go online and buy something.  After this experience I discovered used PCs with fast processors and a lot of memory can be purchased for $100 or less (craigs list), and because they are pre-UEFI, they will be easily load linux.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• My Acer desktop computer (approx. 1 year) ignores the key when entering. It got so bad that I am ready to t

  My Acer desktop computer (about 1 year) X1420G-U5832 ignores the letters when typing. He got one so bad that I'm ready to throw on this computer and try again. I replaced the acer with a logitech keyboard and it does the same thing. Is there a cure for this. Help, please!

  Have you tried to plug it into another USB port?

  May be a corrupted driver. Can be a good download and reinstall.

  Edit: Pilot would be looking for drivers on whatever OS you have installed the site.

• TV VGA port - port of the DVI - D computer - help!

  I'm trying to connect my TV to my desktop computer. The TV has a VGA port (checked the works of port). The computer has a DVI - D port. I have a DVI - I to VGA cable and a DVI - I to DVI - D adapter. But the connection is not recognized by the computer.

  3 possibilities. (1) connection is faulty; (2) DVI port is defective; or (3) DVI port is not enabled.

  Asuming 1 & 2 discover fine options, how to activate the DVI port?

  You're right... it has a HDMI port on the back labeled ""HDMI / DVI 1"... you must use this port." You must also use a stereo cable separated from 3.5 mm to the sound. If you please see this Insignia 32 '' HDTV manual of your TV. Pay attention to the instructions for DVI sat. TV - box on page 10 and DVD/BluRay on page 13. You want to use these instructions but apply them to your computer as shown on page 8.

  "You can use the 1/DVI HDMI on your TV to connect a DVI device to your TV. You will need to attach a HDMI-DVI adapter at the end of the HDMI cable (or a HDMI-DVI cable-all-in-one) that will connect to the DVI device. "Precision added by me.

  Please send Bravo

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said that there is no i

  I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Why the boss moves on a laptop, but seems normal on a desktop computer?

  I have a problem with this site where the filling of the model (the initial size value) fills the yellow area as it should on a desktop iMac, then on a laptop (Powerbook Mac) that same model shifts to the left instead of appear centered. Both use the layout of office, is that this a field of the different layout. Muse a portable browser slightly differently than a regular desktop browser? How can I keep the picture fill to move on the laptop?

  This is the site:

  http://www.cherdonna.com/BUILD6/

  Scroll down to this area of the page...

  

  This is a screen shot from a desktop computer. This is how it should look like on a laptop, but rather the model change to the left and leaves an empty space of yellow on the right side.

  Yes, I did.  But I correct the problem by disabling the scrolling animation fill. It seems now the same on the computer desktop and laptop, but I have more neat Parallax scrolling effect in this part of the page.

• I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  I need activate and install the Prime Minister on a new desktop computer and take it off my laptop that someone else uses at present. How can I do this?

  You can simply disable the activation of the laptop by signing out or Deactivate option: it is not necessary to uninstall.

  Learn how to enable or disable Adobe applications.