ports for ACS

Similar Questions

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• Satellite T130 - 10G: extra port for mini SSD?

  Hi there :)

  I found an empty port in my T130, near the port of hard drive, see also here-> [klick | http://www11.pic-upload.de/08.07.14/3aosd93avlc5.jpg]

  It's a job mSATA-Port for mini-SSD as "ADATA SX300 mSATA SSD 128 GB"
  so I can use both, _and_ SSD HARD drive? *

  Thank you

  (* for example: Partition boot and Windows: SSD, data partitions: HARD drive)

  Hello

  I'm quite sure this isn t mSATA and this series doesn't support the mSATA SSD definitely m.

  Fact is that belonging to the same series models support different hardware specifications.
  For example: some models have been fitted with one: module 3G miniPCI and module Bluetooth Mini-PCI and some models supported only the miniPCI WiFi card.

• WSD port for printers and TCP/IP ports monitor, what is the difference?

  There are a lot of discussions on IP etc. addresses for printer problems. There is no mention of a new feature for the port for printers, WSD port for plug-and-play printers, I assume that the IP addresses have no importance with WSD, my printer is vaguely configured for the WSD port and TCP/IP port, can someone please expain

  Here is a description I found

  The WSD Port Monitor is a new printer port monitor in Windows Vista and Windows Server 2008.  This port monitor supports printing on network devices that are designed to include Web Services for devices (WSD) technology.  Services Web for devices allows devices connected to the IP-based network announce their functionality and to provide these services to customers using the Web Services Protocol.  Clients and devices WSD communicate on the network using a series of SOAP (Simple Object Access Protocol) messages on UDP and HTTP (S).  WSD for devices offers a plug-and-play network experience that is similar to the installation of a USB device.  Services Web for devices also defines a security profile that can be extended to provide additional protection and authentication by using certificates based on the device.

  WSD is not a port, but a port monitor.  A port monitor looks at information from the TCP/IP port and makes routing or changes based on what happens in the port.

  This link has some in the description of the depth of the WSD port monitor:

  http://blogs.technet.com/b/askperf/archive/2008/02/11/WS2008-the-WSD-port-monitor.aspx

  Back to the comparison of the IP address as a P.O. box.  Once the letter arrives in the POST box, someone needs to come empty the box or letters are going no where.

  When the data comes in the TCP/IP port a port monitor is where I look for that to happen.  The WSD port monitor would take over this function from the standard TCP/IP port monitor.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Using the Serial Port for data acquisition Non-Serial

  I searched the forums and can't find anything on this topic.

  I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

  It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

  Thank you all!

  Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

  With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

  Edit: there is no such thing as a visa so I have no idea of what you actually use.

• Set the port for WMI for Windows Server Standard Edition 2003 R2

  Hi guys,.

  Can I know how to solve a static port for WMI using Windows Server Standard Edition 2003 R2?

  Thanks in advance!

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to enable access to a port for my mobile phone application to access. When I try to connect I get error socket is closed.

  I have purchaced an app for my phone android mobile facenate which can access my computer remotely.  When this trys remote app to connect to my computer, I receive an error message that says the socket is closed.  What I need to know, is how to open a port for this app to access my computer.  Also I got an error that I do not have a public IPV4address that may have something to do with it.  I have win 7 64 bit. I would be so happy if someone could help me; I'm really ready to see this app works.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

• Port for uTorrent - WRT54GC

  Hello

  I need further assistance.

  I want to free ports for uTorrent.

  I have a router WRT54GC.

  I successfully logged in and clicked on Applications and games, and I think that there should I typed port in tab Port range forwarding.

  Given that I'm not good at this stuff, and it's my first time there is. I want to know what are the beginning and end for uTorrent port numbers, or where I can find it. I have uTorrent 2.0.3 and I found the current port (for inbound connections) in the installation guide. In the preferences and besides I can't find nothing with 'port' in it.

  As for the Protocol, I would (TCP and UDP), the IP address is the same and will check Enabled. Only, I don't know the start and end port.

  Thank you further and I appreciate the help!

  Thank you

  ALEKS

  I solved it ^^

• USB 0001 virtual port for UsB not found

  When inatalling a Xerox Phaser 8560DN to my laptop HP Win 7 professinal it does not find the virtual USB 0001 port for UsB. I installed the printer even to other laptops and no prblem. When you come to select the port the virtual prot is tehre but not so much in this laptop and HP peole say it is not their problem. Any suggestions on what to do?

  Hello

  You don't see any other virtual ports except USB 0001?

  Follow these steps and check if that helps:

  1. go in Control Panel.
  2 Select all Control Panel items.
  3. open devices and printers.
  4. at the top of the window, select Add a printer.
  5. Select Add a local printer.
  6. If you want to choose a Printer Port, select use an existing port.
  7. in the drop-down list, select USB001 or USB0002 (virtual printer to USB Port).
  8. Select the next button.
  9. in the manufacturers section, select HP.
  10. in the printers section, search for your printer model and select it.

  Note: If your printer does not appear in the list of HP, select nearest LaserJet series model number.

  Click the Windows Update button. WU get the database driver for all HP printers.

  Note: the search may take a while.

  When the search is complete, go back to the HP section and your printer should now appear there. Select it and click the next button.

  Your printer appears in the printer name box, click Next again and the printer will be installed.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to apply for ACS 5.5 Upgrade License

  We bought the license to upgrade ACS 5.5 (R-CSACS-55VMUP-K9 =). I read below the steps of the migration of 4.x to 5.5, I have found anywhere you need a licence. Is it really necessary?

  In fact I intend to reconfigure all about ACS 5.5 from scratch. Can I use the license? or to buy a standard license to download GBA 5.5?

  Since we have already purchased the upgrade license, can I 'pretend' to migrate an ACS 4.x and wipe it and redo the configuration, just to use the Upgrade License?

  What is the best approach to get the job of license with decent cost?

  Thank you

  5.5 Cisco secure access control system migration guide
  Using the Migration utility to migrate data to ACS 4.x for ACS 5.5

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Hello Hujian. The "migration license" is the same as that of "standard". The only difference is that you put on it, since you already have ACS 4.x. If you were buying ACS 5.x today and you have not previously ACS then you would have been ineligible for migration license.

  That being said, there isn't really a direct from 4.x to 5.x migration since the whole system has been rewritten. For example, as you know 4.x ran on Windows and did not require not a vs 5.x license runs on Linux and does not require a license. You can use the utility 'migration' to help you migrate some of the configurations but it does not migrate everything. I personally never liked to use it and always what you plan to do is build the new server from scratch :)

  I hope this helps!

  Thank you for evaluating useful messages!

• Essential tool for ACS 4.1

  Hey guys,.

  could you tell me if there is an essential tool for ACS 4.1? I need to create hundreds of customers AAA!

  Thanks in advance!

  You can try some RDBMS with action codes to add clients through an excel spreadsheet.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/AG.html

• How to open the manual mini port for vpn connection in win7?

  How to open the manual mini port for vpn connection in win7?

  Hi Andrew,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Performance for acs v.5 figures

  Hello

  does anyone know how to get the figures on performance for acs v.5?  I have looked through the documents but could not get really no idea.

  I'm looking for numbers like:

  How many:

  authentications per second per unit

  Especially in a WLAN environment - how many clients can use a device as primary without putting the primary under strong support?

  Thanks for any advice / ideas

  Here are the numbers of the acs 5.3 software performance.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_sys...

  Thank you

  Tarik Admani

  Sent by Cisco Support technique iPad App

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0