Ports of Rellocate Eth from existing to new vDC vDC
Hello
I have an existing pair of Nexus 7009 with a #1 (except the admin vDC) VDC. Each of them has SUP2, OS 6.1 (2) 5 x 2 - FAB and N7K-M148GT - 11L, linecards N7K-M224XP - 23L.
All the line card ports are currently assigned to the vDC existing #1
I need to create a new #2 vDC and reallocate certain ports in order for use on the new vDC. for example, a couple of ports for the persistent connection to vPC, peerlink and vPC.
My concerns are:
(1) I know that ports reallocated will remove their current config when moved to the new vDC #2 during the process of reallocating the
However I don't know if there is any disruption on the line card ports that will be kept on vDC #1. they suffer any beat or whatever it is?
(2) is there a procedure or an existing configuration guide to reassign ports vDC to an another VCC to follow?
Thank you!
Please find my responses inline: -.
(1) I know that ports reallocated will remove their current config when moved to the new vDC #2 during the process of reallocating the
However I don't know if there is any disruption on the line card ports that will be kept on vDC #1. they suffer any beat or whatever it is?
Answer:-there will be no disruption on the line card. Other ports will work very well.
The only failure you will see when you move ports between the TDC is on the ports themselves. By default - the config they are filled in with on the new VDC is just shutdown. If the devices attached will have their lower links up to that you configure and unshut interface.
(2) is there a procedure or an existing configuration guide to reassign ports vDC to an another VCC to follow?
Answer:- http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/virtual...
Only allocate interface will do the job for you IE spend a vdc interfaces to other vdc.
HTH
concerning
Reem
* Please don't forget to rate if useful post *.
Tags: Cisco DataCenter
Similar Questions
-
Project from existing projects, new installation uninstalls old
I created a new project, which has many of the same features as an existing project, so I copied the old project, renamed and used this as the new project. When I finished the initial version of the new project and created a release, install uninstalled the existing project.
New projects installed under a different name, to different folder, EXE has a different name. They do not have registry entries that I created.
What should I change in the new draft so that they are two completely separate programs?
Change the GUID, as Ian suggested, should do the trick.
If you are looking for a more 'official' and sanctioned, approach you need to do is to create a new distribution for your new project. As you do, rather than create new distribution from the bottom up, you can say CVI isntead to copy the distribution of distribution of your old project:
-
I have some serious issues update to existing and new to download applications.
Hello
I just bought a laptop with w8I have some serious issues update to existing and new to download applications.When I click to download an app it still works but does not settle anything.at this point, I can't click the back (arrow) button to return to the main image of the storethe windows button works and I can continue to use my computerthe new application (or the update for an existing one) is not installed.Here are some useful points:-No installation other than Mc. provided McAfee antivirus preinstalled.-computer is not in a proxy connection-windows update does not work, when I click it works forever without doing anything-J' have tried to run the troubleshooter, but it fixes all the time the same 2 questions and that solves nothing-J' I reset the cache to store without change-without any logical explanation, some updates and downloads have managed at the beginning. then, when the problem started I have reset the cache and I could download a couple more. now everything is blocked and no solution found on this forum does not work.Please help methanxOriginal title: problem with store windowsHello
I suggest to run the following command and check to see if it helps.
To fix Windows Update errors, use Deployment Image Servicing and Management.
1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2 type the following commands. Press ENTER after each command.
o DISM.exe / Online/Cleanup-image /Scanhealth
o DISM.exe / Online/Cleanup-image /Restorehealth
3. close the command prompt, and then run Windows Update again.
-
Creating a new document from existing pages
It must be a feature in InDesign that allows you to create a new document using the selected pages in an existing document without having to remove unwanted, pages as when you create a document "save under". And also the possibility to create existing master pages.
It is already there. At least somehow.
Create a new document of the same dimensions of the former, with a blank page. Then, in the old document, select them pages you want and in the Pages menu, choose move Pages. You can then select the new document to move pages to and make sure to remove Pages after that moving is not selected.
-
New virtual machine on a VLAN different from existing virtual machines
Hello
I am trying to replace one of our physical servers with a virtual machine which must be on its own VIRTUAL local network. This virtual machine will get channelled through our network to a router belonged to the client who resides with us. I created a new group of VM ports for the new virtual machine on the standard vSwitch as the rest of our virtual machines are on with id VLAN by default of 0. I was unable to create an id VLAN for the port group. I have the virtual machine is set to the tag on all ports of the physical switch that the host is connected to the VLAN. With this configuration I still can't even ping to the IP address of the physical switch for this vlan. I feel that I'm missing something simple, but I'm pretty new to networks on vSphere. If any information let me know.
Hello
Have you tried directly to type the VLAN ID in the drop-down list box. This is how to specify the VLAN ID for the virtual machines in a group of ports in the case of Virtual Switch Tagging (VST). By design, you can select a predefined VLAN ID or directly start typing the code.
Best regards
Iliana
-
New table from existing data source
Hi all
M using Essbase Studio to generate the cube (Hyperion 11.1.2)... I imported a few tables in a data source. Later it is possible to import a new table in the data source?
Kind regards
LolitaYes is was possible in all versions to add a table/view to a data source, just right click on the data source and select incremental update. 11.1.2 you can also remove or update the sources of existing data with new and changed columns.
-
I work on a site I want to make some pages in templates for reuse... I have an existing designed outside of DW which was beautiful in IE6, IE7, FF, Opera, and Netscape, but at the time I saved as a model and then created a new page and look at the new page in IE6 css is disabled... Not so off that CSS is not used but simply not good, but if I look in any other browser that's good... Is DW 'fix' my code for me?
I looked in the settings and all Code rewriting options are deselected or is it a bug and I can around her...
You must have an error code in the page.
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
=================="WhittleOne" wrote in message
News:f6ljvs$Jac$1@forums. Macromedia.com...
> Thanks for the quick reply... 2 problems.
> 1) I made sure that the options are not selected and re-created the model
> and
> always the same problem.
(> 2) the site is not available but it is in development and the server, it is
> is
> not accessible from outside the intranet...
> -
Import files from iPod to new iTunes
I want to synchronize the music that is on my iPod in my iTunes library on my new macbook. the only option I can see will delete all my music on my iPod. The only thing I could do is to sync the purchased music, but not the rest.
By design, iTunes sync is generally in one direction, from iTunes to iPod library. You can't use iTunes to transfer files from iPod to computer song (except that you noted). However, you can use a method of third-party or a utility to transfer files from iPod to computer song. If you do an Internet search on something like 'ipod music transfer', you should get a few useful links, including a CNET article on the subject.
If your old computer is always accessible, with its iTunes library intact, the well best way to transfer your iTunes complete library, with all media and data to support (for example playlists, play account, ratings, date added, etc), is to copy your iTunes directly folder from your old computer to your new MacBook. If possible, you can post back for further information.
-
I have my old Mac book pro 2007, which I'm trying to retire. I bought a used 2011 Mac book pro and a tb sshd to put in it. Can I clone my old 2007 Snow Leopard - place on the 1 TB sshd, then put it in the used Mac 2011 & update?
Depends on. If it is a model of end 2011, then it cannot be started by a system of Snow Leopard. If it is before the end of 2011, so it can be started from Snow Leopard 10.6.8 or from the original installation DVD program that accompanies new. You must put the old drive in an external enclosure to clone the most recent disc or be able to connect the two using a Firewire cable. Cloning could be done using target disk Mode.
Otherwise, do not clone anything. Install the original OS on the newest disc in the newer computer. Then simply transfer the user account with the Migration Wizard.
How to use the Migration Assistant to transfer files from another Mac
-
How can I prevent iTunes from bad put new music in a new folder?
I have a new Windows computer and moved all my music stored in iTunes, which went well. I had to re-rip CDs (missing songs from a long - ago migration) and I noticed that instead of putting the songs in c:\users\username\music\itunes\itunesmedia, it is now declining these newly ripped songs in a subfolder in iTunes Media appointed, in addition, 'Music' (c:\users\username\music\itunes\itunesmedia\music). I discovered this when I right click
Display in Windows Explorer and sees all the music from a CD in a folder. Records are organized just like in iTunes Media, by artist name and that the mere fact that I know, they are not in one place, they play well. Still, I would an album to be all in one folder, however.Here are my settings/preferences:
location of iTunes Media is: c:\users\username\music\itunes\itunesmedia
Maintain organized the iTunes Media folder is not checked
Copy the files in the iTunes folder when adding to Library Media is verified.
"I assumed that once when adding new songs, the: copy files to iTunes Media folder" would be my songs on behalf of the artist suitable in iTunes Media, but rather he loses music newly added in a new folder confusingly also named 'music' in iTunes Media.
Looking for suggestions on setting changes (a computer expert suggested I not check keep iTunes folder Media to keep the best control of my collection, but I wonder if this would solve everything.) In addition, it is a new computer and Windows music player ever has been implemented, so I don't think that there is a problem with both programs clashing.)
Thx for helping me, Roberta
I think it's the way iTunes he did for awhile now.
iTunes 9 [and later]: understanding iTunes Media organization - http://support.apple.com/HT201979 - more information on the Organization of the new structure https://discussions.apple.com/message/26404702#26404702
-
import bookmarks from mozilla to new computer
Already transferred the files & folders of old laptop to new, but Firefox & associated bookmarks did not transfer. I downloaded Firefox on the new laptop computer, but impossible to find useful info on how to import bookmarks.
https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile
Your old profile is located here in Win XP and W2K:
drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name -
Phoenix HP 860st: buzzing/crackling noise from inside Phoenix new office 860 st
I bought this PC in March and there has always been a low buzzing/crackling sound eminating from the appliance. I recently hooked up a Rift Oculus and the sound amplified by ten or more. Here is link to a video from my phone showing the sound with the computer idle.
https://DL.dropboxusercontent.com/u/28074518/IMG_1993.m4v
The sound is extremely boring and unbearable when hooked to the Rift. It seems to be a problem with the graphics card. The graphics card is an Nvidia GeForce GTX 970. The phone is supposed to be compatible VR.
We use the Dell PC at work, running of Nvidia GeForce GTX 980. They are quiet as can be. No buzz or Hum at all even when hooked to the Rift. I may have been a mistake by opting for the HP for my system at home.
After a long review and negotiation with HP, my system was completely replaced. I said that it is actually coolant system and that it could not be repaired due to the unavailability of the part. The new system works pretty well.
-
SSD upgrade - clone OS + part HP_TOOLS. from old to new ssd hd
I have a hp elitebook 8740w
I changed my old hd with an ssd.How can I keep the partition with HP_TOOLS?
I've already tried
I used the software SSD for migration - perfect copy, the operating system works, copy partition HP TOOLS, but does not start with the f11
I used "migrated easy" - perfect, the operating system works, copy the partition HP TOOLS, but does not start with f11
I use the shell "Macrium Reflect" - perfect copy, the operating system works, copy the partition HP TOOLS, but does not start with f11.is there a way to clone the partition HP TOOLS and make it work with f11 at startup?
Thank you
hpSuperwork wrote:
I already have the recovery dvd... but I have no ' here with me. Is there another method?
If I use windows DVD to intall Os directly on the new ssd hd, download hp sowtware? (es. assistant hp?)
Perfect, now you can simply install the ssd and run drives. The optical drive in the BIOS as first boot and reboot, it will start the recovery without F11 etc...
Yes, I actually prefer a clean install of Windows instead of using the recovery discs. This means a new pure system and I can not install anything (from HP or elsewhere), I want because applications such as HP Support Assistant do more harm than good. However, I always use the HP Wireless Assistant. Make sure you have saved all the necessary drivers (it is in a folder called SWSETUP) or at least you know which device is real and download the drivers later the site of home of HP laptop.
-
Hello
In a bit of an affair with my Dv7. The laptop started to meet a load of startup error. Try using the recovery in Start menu tool led to a blank screen. You try to start windows normally flashed a blue screen too fast to read and then started the boot sequence all over again. I made a recovery from USB on my HP m6 s SO. However try to boot from the drive did nothing to change the way the computer tries to start.
I decided to simply upgrade to a 1 TB Toshiba HD and 16 GB of RAM. Everything installed with ease by making sure that I was not on the carpet and have myself grounded to the metal structure of the laptop while working on it. However, starting with the new HD, I get the error SMART 301. If I try to run a diagnosis of HD happens "Not available" as the result of INTELLIGENT analysis and short-and long-term. I don't get then the no display device bootable detected. I tried to play with all the settings of the BIOS without changing boot.
I don't know what to do now any guide I found said to use the recovery disk/drive in the boot menu. All of the guides I found for the creation and verification of a recovery device assumes that you have access to a functional desktop.
Could I really have gotten a bad HD or s it showing not available because it is not configured for the SMART test?
Any help is appreciated. I really enjoyed the two Dv7 I've owned and do not want it to turn into a paperweight.
Although he remained until about 03:00, I had actually work on my own after few more search.
I found a discussion saying that USB flash drives created using the Recovery Manager contains the recovery tool, but not a copy of windows for the restoration of the system. Given that I made a copy of the recovery media with my m6 SO, I was out of luck.
Do some research more I found an article from a reputable site which links to a mirror of the files digitalriver. I don't link or discuss much more I know most of the forums do not like the word 't'.
I however checked checksum SHA1 file against the official registration of the ISO file windows.
Formatted the USB stick which was the Manager of recovery on it and turned it into a bootable USB key. Downloaded the drivers listed on the site of HP to get my WiFi market to download the rest of them directly on the Dv7. All checks very well now. The 1 TB HD no longer displays the 301 error.
I tried to reset the BIOS and make also a BIOS for emergency return to zero. Not more than anything.
Thanks for the reply it would have been interesting to see what we could have done.
Can you confirm what I've read about the creation of recovery media regarding the USB is different from a CD?
-
Data transfer from XP to new computer running Windows 8
What is the best method to transfer the data from my old computer with XP to my new computer Windows 8?
What is the best method to transfer the data from my old computer with XP to my new computer Windows 8?
Copy and paste the files files you need.
To copy the profile data you can use, windows Easy Transfer Wizard
Maybe you are looking for
-
Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tri
-
Play a voice message before receiving faxes
I have a HP 6500 has connected to my desktop computer that is connected to a telephone VoIP (MagicJack) system. Through the MJ I can receive faxes, that part works fine. My question is: Is it possible to have the HP (or my computer) answer the call
-
How to select the signals from the output of a DAQ assistant
Hello! I am a new user of Labview 8.5 and I work with a USB-6210. I have two different instruments connected to the same USB device, half of the channels are used for the transducers of pressure where I only need reed and record data, while the other
-
the necessary operating system for Pavilion dv6646us disk
Hi, have a Pavilion dv6646us laptop entertainment and made a total deletion. My bad, as in oops. Now I need a disk to the operating system. System has Vista Home Premium and I guess only 32-bit. Someone at - it a disc or can I download on a USB?
-
How to check my product was authentic or not?
How to check my product was authentic or not?