Ports required by the update ThinkVantage Retriever (TVUR) and ThinkVantage System Update (TVSU)

Similar Questions

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• Hotfix required for the update install error Code: 0x800F0100

  Hello

  Ive tried installing updated KB2562937 nine times, whenever the installation fails with the error Code 0x800F0100, can someone help me solve this problem.

  XP Pro SP3 operating system.

  Thanks in advance.

  otev

  Hi otev,.

  Before windows updates, follow these methods.

  Method 1: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Put the computer in a clean boot State prior to update installation to see if there are any software conflict as the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://support.microsoft.com/kb/906602

• Approach required for the updating of the PF of region

  Need to approach for below usecase-
  
  Taskflow T2 has also a pagefragment having table TBL2
  There's a taskflow T1 with a pagefragment a taskflow T2 and a table TBL1.
  I want to update based on the selection in the TBL2 TBL1 passing the parameter for the selected line.
  
  contextual event is a way I know... Can you suggest something else?
  
  Thank you
  Rajdeep

  Hello

  It's the solution documented in your use case

  http://www.Oracle.com/technetwork/issue-archive/2013/13-may/o33adf-1920483.html

  You only need to adapt the sample which, instead of showing the region, selection, you use this information to perform an action on the table T1

  Frank

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Windows cannot connect to the updates server. & Rise of Legends

  When I try to update the game by clicking on "check online updates" I get the "Rise of Legends cannot connect to the Internet.  A firewall is probably blocking it.  to continue, network access, and then click OK. "error.

  Game has been installed on the clean Windows 7 install Service Pack 1 on a Compaq Pressario CQ5814.
  System AMD E-350 a / 1.6GHz processor
  8 GB Ram
  64-bit operating system installed.

  Rise of Legends has been installed fresh
  Version: 0.0704.1001.0000.13.0

  Checked the settings of Internet Explorer and the proxy is set to automatically detect settings.

  Trend Micro Titanium Security - legends on the exceptions list.

  Without checking all the settings for all programs associated with access to the internet for upgrades.  No restrictions occur with other programs.

  The program is on the Windows Firewall exceptions list.

  Troubleshooting of Windows Firewall detects no problem.

  System File Checker detects any missing or damaged file.

  Any help would be appreciated.

  Hello

  Run the Internet connectivity evaluation tool and check the status.

  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx

  In addition, if you connect to the Internet using a router, it can be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem.

• Each PC with the Update icon will install Windows 10

  I have the Update icon on my laptop and I even booked my copy of windows 10, but when I go to 'check pc', it shows that my pc is not compatible, can anyone tell me the conditions required for the update

  The reservation application indicates that I have incompatible hardware (IE. CPU, Bluetooth, video card, printer) or software, what do I do?

  You can check the software developer and supplier of equipment for the latest updates before performing the upgrade.

  UPDATE: Please see the following article by Barb Bowman (Microsoft MVP) solutions to this problem.

  Is that what my display graphic or peripheral Bluetooth compatible with Windows 10? Pre-trial showed that it was not.

  

  Microsoft compatibility database is continually updated with new data. What you can do is to regularly run another scanner to see if the database has updated the information about your hardware. Even if you get this message, you can still run Windows Update after installing Windows 10 and download the latest driver too.

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• After running Thinkvantage System Update, unable to connect the wireless access point

  I've recently performed Thinkvantage System update for updating various programs/drivers on my T61p.  I've updated the V5.12 access connections.  In addition to this I was required to update driver V1.52 power management and functionality of the shortcut key for

  V2.10.0002 (two of them were the most recent available).

  After these updates, I can connect is no longer to any access point wireless that worked before this update.  I have tried to reinstall earlier versions of Access Connections, but still couldn't connect to wireless access points.

  ANY help would be appreciated.

  OK, problem solved.  I found that when I ran last weekend system update downloaded and installed an incorrect driver for my wireless hardware.  I installed the correct driver and now the connection to a wireless access point works.

  Certainly, I don't understand how/why not update system would be to download and install an incorrect driver.  VERY FRUSTRANT and TEDIOUS!

• Because the update for FF30 always get TypeError: XMLHttpRequest constructor requires 'nine', before no problem. What has changed?

  Since the update this morning to FF30, I get the errormessage of the js

  TypeError: XMLHttpRequest constructor requires 'nine ';

  Code:

  function ajaxManager() {}
  the var request;
  var version = new Array('MSXML2.) XMLHTTP.7.0 ',' MSXML2. XMLHTTP.6.0 ',' MSXML2. XMLHTTP.5.0 ',' MSXML2. XMLHTTP.4.0 ',' MSXML2. XMLHTTP.3.0 ',' MSXML2. XMLHTTP ',' Microsoft.XMLHTTP');
  {if (document.getElementById)}
  If (Window. {XMLHttpRequest())}
  request = new XMLHttpRequest();
  }
  If (Window. ActiveXObject) {}
  for (var I = 0; I < versions.length; i ++) < = "" activexobject (versions [i]); " "=" "catch (exception) =" "p =" "request ="new";" "=" "return =" "try {=" "{=" ' "} =" "(> < / versions.length; i ++) >"}

  I hope someone knows what has changed or what I missed.

  Now found a job by myself:

  "if (window. XMLHttpRequest()) {'}

  changed to

  "if (window. XMLHttpRequest) {'}

  Seems the old way I used now no longer works

• When I change albums on my site of Porta Firefox does not update the site well as do other browsers.

  I have a site of Porta by using 'bystander' and when I update the albums he is generally very good, but today I changed the content in 2 albums and even if they are updates on other browsers, the changes are not displayed in my Firefox. I deleted history etc in the case that was originally a delay in updating the browser, but it made no difference. Anyone has any ideas please?

  This has happened

  Just once or twice

  == I changed the content of my Web site.

  Try to clear the browser cache.
  Tools > Options-> advanced > > tab network - storage offline = clear now button.

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• ThinkPad t440p - how to change the language of "Thinkvantage System Update" from Japanese to English?

  Goodday

  Is - it possible to change the installed language on "Thinkvantage System Update" from Japanese to English?

  Thank you! \m/

  I think that something about configuration is left behind after uninstalling the existing version. I would try this:

  New update uninstall in Control Panel.
  Restart the PC.

  Then go into the folders SWTools, Program Files, Program Files (x 86) and the program data. Look for folders named "Lenovo" and related to the update system subfolders. You are looking for stuff that was left of the uninstall. Delete the subfolders.

  Note, deleting stuff in the program data will probably take place in the system update, when you then run it, showing you all the stuff you've already seen and chosen to hide. The storage folder it is the record of all the things that the program sought on the Lenovo download site. So you'll have to decide again on all lists.

  Once you have removed the remains, did not hurt to reboot once again and then go to the support page for the United States and the download system update it. Run the executable file and hope that it asks you the preferred language. See what's happening.

  Good luck.

  WARNING: I'm just here improvise with that. The steps above are what I'd do.

  There could also be that something flying in the Windows registry that is not removed, in which case you will have to search for it, too, but who knows how they are appointed. I don't.

  Finally, you can always reinstall Windows and then load only these desired Lenovo applications. You can install the update system by itself - I do that - and not as a part of the whole of the suite of ThinkVantage tools and all that much more. I'm sure a reinstall of Windows and the applications manually should solve your problem, but it's a bit of work to do.

• can someone please confirm the THinkvantage system update is functional or not right now?

  I'm updating this T42 with the VER 3.14 thinkvantage system update and all I get is 'system update server is temporarily unavailable.

  is there someone willing to try an update and to confirm or deny that the server works or not?

  then after results here please?

  If this is not the server, its my machine, I just need to know what is at fault

  Thanks in advance for anyone wishing to spend 5 seconds of their life to help me x

  I'm not near my Thinkpad, but have you tried to go to another site? It's may be down for maintenance Sunday AM.

• When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution.

  When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution

  Hello

  This should help you:

  "Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall.

  http://support.Microsoft.com/kb/968002

  See you soon.