POS 6.1 can choose the correct time zone please?

Similar Questions

• The FEP Server alert notifications do not display the correct time zone

  Time stamps FEP report

  When I receive my FEP Server alert notifications timestamps are far away. Nobody knows how to set the correct time zone, so the report will be accurate?  I think that the default time is UTC.

  Hello

  If you are referring to serve Advanced Endpoint Protection, I suggest you to report the issue in the link below:

  http://social.technet.Microsoft.com/forums/en/category/forefront

  I hope this helps.

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• How can I get the clock to show the right time. Will not even when I choose a correct time zone

  I tried Indiana (East), I tried Eastern U.S. & watch still Canada an hour later than it really is.  How can I fix it

  http://www.Microsoft.com/surface/en-GB/support/browse/surface-with-Windows-RT

• Can not keep the correct time on my laptop Dell M4500

  Hi all

  I, ve problem with time on my Dell M4500 laptop a few months. I tried several solutions but not worked. time holds as long as the used laptop however wake up after sleep time shows right from the start of the commissioning (sometimes for seconds, sometimes for a few minutes) and sets then went back to a wrong value. I checked the weather it is time windows or time of bios, actually, it was the time of bios that changes after getting return of mode 'sleep' and windows after the bios later time, and if I want to correct then I have to restart, go to configuration, change time bios and then continue until the next time...

  I, ve tried the following:

  battery 1-i bios modified by a new Dell... unsolved problem
  2 - Dell has provided new motherboard with a new battery (verified) and the last update of the bios > problem unsolved
  3 went to services.msc and turned on/start/stop windows.time service > problem still there
  4 enabled auto-sync > problem unsolved

  y at - it an idea about this problem? in fact I ve called Microsoft but they replied that time BIOS cannot be changed or affected through Windows because windows does not have access to the bios time, however after change of motherboard (changed with a new one) is it a physical cause for this problem?
  any help? Thank you
  Saami

  1. click on the date and the time on the taskbar.

  2. click on change date and time settiings
  3. now check if you have set the correct time zone. If not, click on change the time zone to your local time location and click OK.
  4. now click on the internet time tab.
  5. click on change settings.
  6. then check it in as a "synchronize as internet time server.
  7. then click Update now.
  Try the following steps

• Cannot set the manual time zone on ipad

  IOS is updated. I'm try cnange my time zone manually. Whenever I select a city in new Madrid for example, the time zone remains as Sydney. I am unable to change it. Auto zone has been disabled because it acknowledges that Sydney. Looked far from a solution, but nobody else seems to have this problem.

  I think that 'set automatically' refers to the time, not the time zone. Apple devices are quite picky about having the correct time zone for the location, then you will not be able to change it.

• JRE uses the wrong time zone

  Hello

  I have a problem with the zone in my java application.

  My current/correct timezone is "Europe/Berlin" or it IS.

  When I type the following command as my user I get the correct output:

  $ date "+%Z %z"
  CEST +0200
  

  But when I run my java application uses the time zone GMT + 0100. I've run the following Java code to verify:

  import java.util.Date;
  import java.util.TimeZone;
  
  
  public class TimeTest {
  
  
      public static void main(String args[]) {
          long time = System.currentTimeMillis();
          String millis = Long.toString(time);
          Date date = new Date(time);
          System.out.println("Current time in milliseconds = " + millis + " => " + date.toString());
          System.out.println("Current time zone: " + TimeZone.getDefault().getID());
          System.out.println("useDaylightTime = " + tz.useDaylightTime());
          System.out.println(date);
      }
  }
  

  When I run the following output is generated:

  Current time in milliseconds = 1435319087443 => Fri Jun 26 12:44:47 GMT+01:00 2015
  Current time zone: GMT+01:00
  Fri Jun 26 12:44:47 GMT+01:00 2015
  

  So where java it pulls its zone of? It differs from the default system timezone.

  Im running on Redhat 6.6 with Java 1.7.0_79

  Java version "1.7.0_79".

  Java (TM) SE Runtime Environment (build 1.7.0_79 - b15)

  Java for 64-bit Server VM (build 24, 79 - b02, mixed mode)

  Hello

  Problem was environment variable $TZ. After I unplugged, Java uses the correct time zone

  $ echo $TZ
  :/etc/localtime
  $ date "+%Z %z"
  CEST +0200
  $ java TimeTest
  Current time in milliseconds = 1435322310534 => Fri Jun 26 13:38:30 GMT+01:00 2015
  Current time zone: GMT+01:00
  Fri Jun 26 13:38:30 GMT+01:00 2015
  $ unset TZ
  $ date "+%Z %z"
  CEST +0200
  $ java TimeTest
  Current time in milliseconds = 1435322363525 => Fri Jun 26 14:39:23 CEST 2015
  Current time zone: Europe/Berlin
  

• Clock on Satellite M50D-A - 10 d never shows the correct time

  All the time I have set the clock in, it always goes bad after a short time.
  Even went into Bios and set the clock here very precisely, that it won't always.
  It isn't easy because all the documents that I work for the school are badly dated, changes, do not get sorted correctly and so on...

  What can I do to get the exact time? (and Yes, it is supposed to be set automatically by windows)

  Return the laptop and the set?

  concerning

  Hugo

  Could you please provide some essential info on the laptop model, the system and the version of the BIOS?
  Is the laptop connected to the internet or you are working offline.

  If the laptop is connected to internet, it synchronizes automatically time with server time of Windows and sometimes the clock doesn't see the good due to some problems.

  Probably you have already tried to change the time manually by clicking the change data and time settings. Right?

  Well, in the window of the Date and time you have 3 tabs. The last tab called time Internet provides sync settings. It displays information about the last synchronization and when happens the next synchronization. You will also see the server time is synchronized automatically. The current server should be time.windows.com.

  To change the current server, click the Change settings button. Here you can choose the server. Click on move down and the list of servers.

• I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

  NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

  Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

  Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

• Satellite Pro P100 chronometric fails to keep the correct time

  On the web, there was some good number of reports that the P100 timestamp fails to keep the correct time.
  Mine did this for a few months now.

  I tried all the online recommendations such as bios update, etc with no luck and then also of changing the battery of the CCF.
  I disassembled the laptop, (very easy if you use the instructions in "www.irisvista.com"), however I found unable to buy a new battery (battery ' green with plug-in lead and marked 0706).

  I unplugged the battery for a few minutes and then plugged back, then re-assembled the laptop so I can use it until maybe I could get a new battery.

  HOWEVER, the clock now works perfectly.

  I remember reading on another post somewhere that battery temporariliy uplugging solves the problem, AND IT DOES.
  If this happens again I will extend the battery leads to RTC outside in a place easy to access under a blanket where I can disconnect and reconnect the battery in a minute or two.

  Hello

  Thank you for this information buddy.
  I also read the thread on the topic P100 and clock.
  Someone said that the technician ASP removed the CMOS battery and plugged again.
  This helped!

  PS: I would not recommend disassembling the laptop, even if you have found some guidelines in the internet in my opinion, the risk of damage is too high. However, it s just my personal opinion.

  Greetings mate

• My out going to send show a slow time - when the I send email it displays the correct time

  Hello

  I have a vista home Prieum system... .the problem is that email when time which is recorded on the email before it is sent a slow time... shows when the e-mail is received, it displays the correct time... How can I recrify it, you can

  Jeff Matthews

  Hi Jeff Matthews.

  Thanks for posting in the Microsoft Community.

  I understand that outgoing emails are incorrect time, he would be grateful if you could answer this question more answering the question.

  1. this happens with a specific e-mail program?

  2. are you faced with the question of the webmail like Hotmail or Yahoo, or with any client e-mail like Outlook?

  3. have you made a recent software or hardware changes to the system?

  It seems that you have to change some settings in the email program itself to change the time.

  You must get in touch with the email service provider for assistance.

  If you use Hotmail or Outlook, you can post your query in Windows Live or Office Outlook Forum to get help.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• help choose the correct color settings

  Hello everyone, its been a long time that I installed Photoshop and do not remember the appropriate parameters for the work in Photoshop CS6.  I had a problem with my computer and had to reinstall and now my mind is a blank. I tried browsing here and on the net and came up with a large number of ions of conflict.  I know I have to use Adobe 1998, but alternatives escape me. I do know that if I should change the gray space, I was told to use gray gamma 2.2. I don't know if I should Desaturate monitor 20% etc.

  What conversion options? What should those be?  And what about the advanced controls and what must be those defined for better photographic needs.

  I hope that's not too redundant, if it has already please send me to her.

  Judging by your screenshot I guess you run Photoshop on a PC and I hesitate to make any recommendation beyond the ones I listed. I think that. other than the installer, I suggested, all of the default settings are a safe bet.

  If my answer your request solved the problem, you can mark the correct answer. Thank you.         normftb

• Is it possible that I can choose the photos I want to synchronize to dropbox?

  Original title: SYNC DROPBOX

  Is it possible that I can choose the photos I want to synchronize to dropbox.  Currently, every picture I take is automatically synchronize.  I don't want to share all my photos through dropbox.

  You must ask the support help with their software.

• does anyone know how to number the photos when they are exported so someone can choose the peak of number

  Anyone know how to number the photos when they are exported from LR, so someone can choose the photo they like with a number

  Sorry took with the last answer.

  More simple form used something like-Sequence_Filename number suffix

  If an image as _ABC0987.nef will become 0001_0987.nef and 0002_0988.nef, etc.

  Ask your customer to give you the full file name. The suffix indicates the original file.

  (I hope that you only need to search in a folder and do not have a bunch of images named the same that would cause problems!)

• I exported my Premium Pro movie to a .m2v file.  When I try to open a new project so that I can create a DVD file and I can choose the .m2v file, it is grayed out.  Also, if I double click on the .m2v file, it will open s toward the top, but w

  I exported my Premium Pro movie to a .m2v file. When I try to open a new project so that I can create a DVD file and I can choose the .m2v file, it is grayed out. Also, if I double click on the .m2v file, it opens, but will not play and seems to be locked or frozen. What can I do?

  Again, you use "import as" assets or timeline?