The FEP Server alert notifications do not display the correct time zone

Similar Questions

• POS 6.1 can choose the correct time zone please?

  Hello.

  IM at the stage of configuration VDP now (...:8543/vdp-configure) and I can't find the good zone time (I need UTC + 7). I use usually Asia/Krasnoyarsk tz, there are a lot of UTC + 7 areas here invalid time zone values and in the SLES itself BUT without these areas at the POS configure the web interface. Can someone tell me why? May be I can complete the configuration with wrong time zone and change later recreating the link/etc/localtime or in the console vm POS? Or should I choose correct time zone during the initial Setup?

  OK, I got a solution. Initial configuration of POS has been completed with the incorrect time zone. Then I changed timzone in the vm console VDP (define-> Asia-> Russia-> Krasnoyarsk time zone), but the bad timzone was still in the POS-configure page. However after the restart of the POS POS-configure vm page indicates the correct time zone (Asia/Krasnoyarsk). Unfortunately, I still can not choose this area to POS - configure-> time zone.

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• Can not keep the correct time on my laptop Dell M4500

  Hi all

  I, ve problem with time on my Dell M4500 laptop a few months. I tried several solutions but not worked. time holds as long as the used laptop however wake up after sleep time shows right from the start of the commissioning (sometimes for seconds, sometimes for a few minutes) and sets then went back to a wrong value. I checked the weather it is time windows or time of bios, actually, it was the time of bios that changes after getting return of mode 'sleep' and windows after the bios later time, and if I want to correct then I have to restart, go to configuration, change time bios and then continue until the next time...

  I, ve tried the following:

  battery 1-i bios modified by a new Dell... unsolved problem
  2 - Dell has provided new motherboard with a new battery (verified) and the last update of the bios > problem unsolved
  3 went to services.msc and turned on/start/stop windows.time service > problem still there
  4 enabled auto-sync > problem unsolved

  y at - it an idea about this problem? in fact I ve called Microsoft but they replied that time BIOS cannot be changed or affected through Windows because windows does not have access to the bios time, however after change of motherboard (changed with a new one) is it a physical cause for this problem?
  any help? Thank you
  Saami

  1. click on the date and the time on the taskbar.

  2. click on change date and time settiings
  3. now check if you have set the correct time zone. If not, click on change the time zone to your local time location and click OK.
  4. now click on the internet time tab.
  5. click on change settings.
  6. then check it in as a "synchronize as internet time server.
  7. then click Update now.
  Try the following steps

• Cannot set the manual time zone on ipad

  IOS is updated. I'm try cnange my time zone manually. Whenever I select a city in new Madrid for example, the time zone remains as Sydney. I am unable to change it. Auto zone has been disabled because it acknowledges that Sydney. Looked far from a solution, but nobody else seems to have this problem.

  I think that 'set automatically' refers to the time, not the time zone. Apple devices are quite picky about having the correct time zone for the location, then you will not be able to change it.

• JRE uses the wrong time zone

  Hello

  I have a problem with the zone in my java application.

  My current/correct timezone is "Europe/Berlin" or it IS.

  When I type the following command as my user I get the correct output:

  $ date "+%Z %z"
  CEST +0200
  

  But when I run my java application uses the time zone GMT + 0100. I've run the following Java code to verify:

  import java.util.Date;
  import java.util.TimeZone;
  
  
  public class TimeTest {
  
  
      public static void main(String args[]) {
          long time = System.currentTimeMillis();
          String millis = Long.toString(time);
          Date date = new Date(time);
          System.out.println("Current time in milliseconds = " + millis + " => " + date.toString());
          System.out.println("Current time zone: " + TimeZone.getDefault().getID());
          System.out.println("useDaylightTime = " + tz.useDaylightTime());
          System.out.println(date);
      }
  }
  

  When I run the following output is generated:

  Current time in milliseconds = 1435319087443 => Fri Jun 26 12:44:47 GMT+01:00 2015
  Current time zone: GMT+01:00
  Fri Jun 26 12:44:47 GMT+01:00 2015
  

  So where java it pulls its zone of? It differs from the default system timezone.

  Im running on Redhat 6.6 with Java 1.7.0_79

  Java version "1.7.0_79".

  Java (TM) SE Runtime Environment (build 1.7.0_79 - b15)

  Java for 64-bit Server VM (build 24, 79 - b02, mixed mode)

  Hello

  Problem was environment variable $TZ. After I unplugged, Java uses the correct time zone

  $ echo $TZ
  :/etc/localtime
  $ date "+%Z %z"
  CEST +0200
  $ java TimeTest
  Current time in milliseconds = 1435322310534 => Fri Jun 26 13:38:30 GMT+01:00 2015
  Current time zone: GMT+01:00
  Fri Jun 26 13:38:30 GMT+01:00 2015
  $ unset TZ
  $ date "+%Z %z"
  CEST +0200
  $ java TimeTest
  Current time in milliseconds = 1435322363525 => Fri Jun 26 14:39:23 CEST 2015
  Current time zone: Europe/Berlin
  

• Low battery notification is not displayed

  Even if the low battery notification is defined as 'ON' notification is not displayed when the battery goes down

  Hello

  Turn on the battery icon in the notification area.

  a. right click on the taskbar and then click Properties.

  b. click the Notification area.

  c. under the system icons, check in "Power".

  d. click the button apply or OK.

  See also: http://windows.microsoft.com/en-US/windows-vista/Battery-meter-frequently-asked-questions

• Display data DateTime Fields in the local time zone

  I have a table defined as follows:
  
  create table TimeTest
  (
  DATETIME TIMESTAMP (0) WITH TIME ZONE
  )
  
  I insert two lines where the time zone changes to a date given in the spring:
  insert into timetest values (datetime) (to_timestamp_tz (' 08/Mar/2009:01:59:55-0500 ',' DD/my/YYYY:HH24:MI:SS TZHTZM ""));
  insert into timetest values (datetime) (to_timestamp_tz (' 08/Mar/2009:03:00:00-0400 ',' DD/my/YYYY:HH24:MI:SS TZHTZM ""));
  
  How can I select the datetime field in the time zone of my choice? If my session time zone is - 0400, should not 01:59:55-0500 displayed as time 02:59:55?
  
  The session time zone is:
  Select double sessiontimezone;
  -04:00
  
  So why do I get this:
  Select to_char (datetime, ' DD/my/YYYY:HH24:MI:SS TZHTZM "") of timetest;
  08/Mar / 2009:01:59:55-0500
  08/Mar / 2009:03:00:00-0400
  
  I thought I would get this result instead:
  08/Mar / 2009:02:59:55-0400
  08/Mar / 2009:03:00:00-0400
  
  Thank you
  Troy
  
  Published by: cforasun on April 8, 2010 17:36

  It is stored as a timestamp with time zone, so you must cast in the local time zone for your database:

  Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  Connected as fsitja
  
  SQL>
  SQL> create table TimeTest (DATETIME TIMESTAMP(0) WITH TIME ZONE);
  
  Table created
  SQL> insert into timetest(datetime) values (to_timestamp_tz('08/Mar/2009:01:59:55 -0500', 'DD/Mon/YYYY:HH24:MI:SS TZHTZM'));
  
  1 row inserted
  SQL> insert into timetest(datetime) values (to_timestamp_tz('08/Mar/2009:03:00:00 -0400', 'DD/Mon/YYYY:HH24:MI:SS TZHTZM'));
  
  1 row inserted
  SQL> commit;
  
  Commit complete
  SQL> select datetime, cast(datetime as timestamp(0) with local time zone) from timetest;
  
  DATETIME                                          CAST(DATETIMEASTIMESTAMP(0)WIT
  ------------------------------------------------- --------------------------------
  08/03/09 01:59:55 -05:00                          08/03/09 03:59:55
  08/03/09 03:00:00 -04:00                          08/03/09 04:00:00
  
  SQL> 
  

• PDM Viewer do not display data with time stamp

  Need help with the timestamp of the data in a PDM file generated by the DAQ Assistant.

  When I use the PDM Viewer, with x the value absolute time scale, the date starts in 1903. If I use Excel to look at the file that the start time is correct (i.e. 2013).

  Bo_Xie, I simplified my VI and now able to display the correct time stamp. Thanks for your time!

• My out going to send show a slow time - when the I send email it displays the correct time

  Hello

  I have a vista home Prieum system... .the problem is that email when time which is recorded on the email before it is sent a slow time... shows when the e-mail is received, it displays the correct time... How can I recrify it, you can

  Jeff Matthews

  Hi Jeff Matthews.

  Thanks for posting in the Microsoft Community.

  I understand that outgoing emails are incorrect time, he would be grateful if you could answer this question more answering the question.

  1. this happens with a specific e-mail program?

  2. are you faced with the question of the webmail like Hotmail or Yahoo, or with any client e-mail like Outlook?

  3. have you made a recent software or hardware changes to the system?

  It seems that you have to change some settings in the email program itself to change the time.

  You must get in touch with the email service provider for assistance.

  If you use Hotmail or Outlook, you can post your query in Windows Live or Office Outlook Forum to get help.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• Satellite Pro P100 chronometric fails to keep the correct time

  On the web, there was some good number of reports that the P100 timestamp fails to keep the correct time.
  Mine did this for a few months now.

  I tried all the online recommendations such as bios update, etc with no luck and then also of changing the battery of the CCF.
  I disassembled the laptop, (very easy if you use the instructions in "www.irisvista.com"), however I found unable to buy a new battery (battery ' green with plug-in lead and marked 0706).

  I unplugged the battery for a few minutes and then plugged back, then re-assembled the laptop so I can use it until maybe I could get a new battery.

  HOWEVER, the clock now works perfectly.

  I remember reading on another post somewhere that battery temporariliy uplugging solves the problem, AND IT DOES.
  If this happens again I will extend the battery leads to RTC outside in a place easy to access under a blanket where I can disconnect and reconnect the battery in a minute or two.

  Hello

  Thank you for this information buddy.
  I also read the thread on the topic P100 and clock.
  Someone said that the technician ASP removed the CMOS battery and plugged again.
  This helped!

  PS: I would not recommend disassembling the laptop, even if you have found some guidelines in the internet in my opinion, the risk of damage is too high. However, it s just my personal opinion.

  Greetings mate

• Missing time zone - cannot see the India time zone in the list of time zones

  Hello

  I have a Windows 7 Home Premium 64-bit edition installed on my Dell Studio laptop. As I lived
  in the United Kingdom, I had setup my timezone UTC (Dublin, Edinburgh, Lisbon, London).

  Now, I have reinstalled in India. I want to change the time zone UTC + 5:30 (Delhi, Mumbai, Calcutta).
  However, this time zone is not listed in the drop-down list. So I can't set the time zone.

  I read on the site of Microsoft Support that Microsoft has released an update to resolve the problem of the time zones (Windows6 1 - KB2779562 - x 64).
  I have applied this update, but I don't see the India time zone in the list.

  Please can someone help me? All tracks will be appreciated.

  Thanks in advance.

  See you soon

  How to reset the zone list in Windows 7...

  http://www.SevenForums.com/tutorials/100925-time-zones-restore-missing-default-time-zones.html

• Why my iPhone showing the wrong time zone?

  Why my iPhone showing the wrong time zone when it is set to automatic? When I put it manually, it is fine. Is this a bug in the iOS 9?

  Try to activate your iPhone location service before

• Notifications is not displayed

  I had this question yesterday, which I marked him replied here too soon: pushed to display Notifications.

  The problem persists. After 24 hours using the Apple Watch, I had received notifications, they appear on the screen nor I had any notification haptic. These are defined to the maximum level of vibrations.

  I saw the red dot, my iPhone was locked and outside and the watch does not inform what either. I read a lot of posts here and other sources mentioning the same problem, recommending the closing of the iPhone, iPad and look down and turn then turn on again. I tested several combinations of parameters with no joy. If I turn off the watch, they get well like they did in the iPhone or Mac.

  Some of the things I've tried:

  • Affecting the mirror custom apps and specify notifications it
  • With regard to the coverage of Mute turn off/on (I did)
  • Restart the iPhone, iPad, Mac and Watch
  • Shooting/disable detection of wrist

  The only thing I can think is that I use a Mac I use applications that should be sending notifications, Messages, Slack, phone, calendar, or telegram, but not using these applications at the same time, so notifications obtained thanks to the iPhone but using a Mac may be the cause for not having to the monitor?

  Some of the threads I checked:

  I don't get notifications on my Apple Watch

  Haptic works is not on Apple Watch messages

  Is this all that I am obviously missing?

  Hello

  You have not matched then repaired your Apple Watch an iPhone remains to be seen if that helps?

  Cancel the match your iPhone and Apple Watch

  Doubtful that one if this has something to do with your Mac. Your Apple Watch is synchronized to your iPhone only.

• I Z320 smartphone, flashing light notification is not displayed.

  I have not my phone lights up all the time, I am very new to this technology, and just recently, I bought this phone.  Before when there are notifications, including emails, for several days now, it gives me this alert to activate my phone and check that it is this green light flashing.  I'm not always on this smartphone, and it is very useful to have this warning that I am not always connected to the wifi.  I'd appreciate your help.

  AFAIK, you can receive notifications by e-mail only when you are connected to a network connection or data.

  so it is the correct behavior.