Can not keep the correct time on my laptop Dell M4500

Similar Questions

• Satellite Pro P100 chronometric fails to keep the correct time

  On the web, there was some good number of reports that the P100 timestamp fails to keep the correct time.
  Mine did this for a few months now.

  I tried all the online recommendations such as bios update, etc with no luck and then also of changing the battery of the CCF.
  I disassembled the laptop, (very easy if you use the instructions in "www.irisvista.com"), however I found unable to buy a new battery (battery ' green with plug-in lead and marked 0706).

  I unplugged the battery for a few minutes and then plugged back, then re-assembled the laptop so I can use it until maybe I could get a new battery.

  HOWEVER, the clock now works perfectly.

  I remember reading on another post somewhere that battery temporariliy uplugging solves the problem, AND IT DOES.
  If this happens again I will extend the battery leads to RTC outside in a place easy to access under a blanket where I can disconnect and reconnect the battery in a minute or two.

  Hello

  Thank you for this information buddy.
  I also read the thread on the topic P100 and clock.
  Someone said that the technician ASP removed the CMOS battery and plugged again.
  This helped!

  PS: I would not recommend disassembling the laptop, even if you have found some guidelines in the internet in my opinion, the risk of damage is too high. However, it s just my personal opinion.

  Greetings mate

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• Can not find the correct driver in Macbook - J4680c

  Hello!

  just install a print server on the network from my boss - netgearPS121v2.  everything is great with 2 Mac and a PC - everything can print, etc.

  all the macs print to print IP assistance and the appropriate driver.  for some reason, my boss pro macbook did not have the correct driver installed and all that is available to him is "HP Officejet J4680 series - Fax" that does not work.  I use the same macbook pro with the same system (10.6) and did not have a problem.  his machine was the Guinea pig for his assistant try to set up while on the phone with HP tech support.  (I was out of town and unable to install).  I have a feeling that this was an inadequate installation and hampered by technical support, try to fix it.

  any suggestions on how to completely uninstall the HP software so I can't completely re - install?

  Thank you!

  Steve

  Well Yes,.

  I guess that someone loaded the HP from the CD for the printer software (which is only 10.5 or earlier version).  Here's how to correct:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• The FEP Server alert notifications do not display the correct time zone

  Time stamps FEP report

  When I receive my FEP Server alert notifications timestamps are far away. Nobody knows how to set the correct time zone, so the report will be accurate?  I think that the default time is UTC.

  Hello

  If you are referring to serve Advanced Endpoint Protection, I suggest you to report the issue in the link below:

  http://social.technet.Microsoft.com/forums/en/category/forefront

  I hope this helps.

• Where can I access the webcam integrated on my laptop Dell Studio 1500?

  Where can I find the webcam on my laptop Dell Studio 1500?

  Thank you.

  You must have a webcam icon in the notification bar, double click on it then click on center of Webcam.

  If you do not see the icon click Start, all programs, Dell Webcam Dell Webcam Center.

• Can not get the correct message eject the USB mass storage device

  I get a message saying "Windows cannot stop the 'Generic Volume' device because it is in use."  Close any programs or windows that might be using the device, and then try again later.  As far as I know, everything is closed.

  Try using Unlocker:
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

  Read CNET Editors note': Unlocker includes the software provided option. The provided software are installed by default, you can choose not not to install them by unchecking the boxes during the installation.

  After installation, you can right click on the drive, choose Unlocker from the context menu, you will see which locks your drive then you can click on the "Kill process", "Unlock" or "Unlock all" buttons. You can then use the Safely Remove Hardware.

• Problem 201: I can not install the second time Adobe Creative Cloud. Can someone help me?

  I can't install Adobe Creative Cloud twice. Can someone help me?

  Hello

  Please see the help document that below that explains the error Code 201:

  Download error, installation or update of Cloud Creative applications

  You can also see the thread below where this issue has been addressed:

  Error 201

  Error 201; CC constantly disconnected desktop application, will not download again

  I hope that helps you!

• Can not find the drivers for my HP laptop

  Hello

  I have my HP DV4 2140us, simply stoped working and HP support diagnosed a card problem which can not be repaired locally, and I can't afford to have shipped it, so I got the form changed the default to a processor AMD Board onboard intel, now all my drivers are clearly does not ,

  but for some reason I can't find the drivers.

  HP Web site seem to identify my phone like HP dv4-1200, the display is faulty, the USB drivers do not work, or no webcam and other stuffs.

  Is there anyway to fix this?

  System Recovery allows to solve the problem?

  You are the very welcome.

  You have installed the video driver Intel Mobile 4 series and it did not work?

  I don't know what to say because it would be the video driver based on the hardware ID you have posted.

  I don't know how far along you are in the process, but now that you have the page good driver to install the drivers, you can try to install W7 from the start and install the drivers in this order (which is of the order, they must be installed in) and restart after each installation of the following items:

  1 driver Chipset

  2. graphics driver

  3. audio driver

  Paul

• I can not put the correct date, time, or whatever it is on the LCD on my HANDYCAM DCR-HC30

  I had not used my cHandycam for quite awhile for the date and the time is shown in the January 1, 2004, at 12: 00 and I was not able to change using the LCD screen. I'm fairly certain that the remote control battery is no good because I never changed it. The camera still records both Ribbon and the memory card, but I would like to be able to set the date and time. Has anyone else had the same problem with this Handycam or know how to fix. I charge the internal battery by pluging in there for more than 24 hours. The internal battery is bad and if so, is it replaceable by me? Thank you.

  If you can access the MENU of the Handycam, please follow the steps below to set the date and time.

  1. turn on your camcorder and open the LCD.

  2. press on P-MENU then MENU.

  3. Select CLOCK SET by pressing the HIGH or arrow DOWN found at the upper and lower part of the screen, then press OK in the lower right corner.

  4 set the YEAR by pressing the HIGH or DOWN arrow found at top and bottom of the screen, and then tap OK in the lower right. Follow the same procedure with the MONTH, DAY, HOUR and MINUTE, and then tap OK.

  NOTE: To midnight, set at 12:00 AM. For lunch, set for 12:00

  You can also view page 22 operations here Guide: https://docs.sony.com/release/DCRHC30.pdf

  If my post answered your question, please mark it as "accept as a Solution.

• Satellite C855 - 12K - can not install the correct display driver

  I have a Satellite C855 - 12K for the Croatian market. Recently, I noticed a loss of performance in games, even on settings low that I used to play normally high or ultra. So I decided to reinstall windows and get the latest drivers.

  All drivers installed correctly the display one, when I install and reboot the system and the laptop BSOD out restores.
  I tried to manually install the driver without any catalyst, but that does not work either.
  NET framework 4.5, directx 11 and vcredist are all installed in front of the pilot.
  Does anyone have an idea what this topic?
  Graphics card is the Radeon HD7610M.

  Update on this:
  I just managed to find the old CCC software (version 2012.0120.420.7502) and it installed fine.
  I am still concerned why the new driver does not work?

  Post edited by: markov

  Hi Markov

  According to the specifications of the laptop this model was delivered without BONES. Can you please tell us what OS you use and don't you try to install the driver on the Toshiba download page?

• Do not indicate the correct time to countdown

  I changed my Nouvelle_date to see where the problem lies, but can't match my time at 19:00 22/02/2012

  this.onEnterFrame = function() {}

  var today = new Date();

  Those of var = today.getFullYear ();

  currentTime var = today.getTime ();

  var Date_cible = new Date (2012, 2, 31, 7);

  var Date_cible = targetDate.getTime ();

  var timeLeft = Date_cible-currentTime;

  timeLeft var = 900000000000;

  var s = Math.floor (timeLeft/1000);

  var min = Math.floor (sec/60);

  var h = Math.floor (minutes/60);

  var days = Math.floor (hrs/24);

  s = String(sec%60);

  If (sec.length < 2) {}

  s = '0' + seconds;

  }

  min = String (min % 60);

  If (min.length < 2) {}

  min = "0" + min;

  }

  h = String (hrs % 24);

  If (hrs.length < 2) {}

  h = "0" + hrs;

  }

  days = String (days);

  var counter = String (days + ":" + h + ":" + min + ":" + dry);

  time_days. Text = day-31

  time_hrs. Text = h

  time_mins. Text = min

  s = time_secs.text

  };

  I'm pointing out that Date_cible is not 22/02/12 at 19:00.  If it were, it would look like:

  var Date_cible = new Date (2012, 1, 22, 19);

• Satellite C870 - 19L can not set the correct resolution

  I have a new laptop and my problem is that the maximum resolution that can be adjusted is 1366 x 768, although the screen has a resolution of 1600 x 900. The problem is, that only 80% of the desktop is displayed, the area to the right is not displayed.

  I couldn't find an .inf file in the download section.

  What can I do?

  In Notepad, specification is clearly written that your laptop comes with preinstalled Win8 64 bit and this preinstalled OS (recovery image) contains the right display driver. Default factory settings resolution must be set to the native display resolution.

  The question is: you use this original preinstalled operating system and if not what exactly do you do?

• My printer HP PhotosmartC-4180 is disconmected from my computer. I can not connect the correct printer.

  my computer is the shot of my devices for scanning and printing, and I can't reconnect.

  I had this problem also.

  This seems to happen when you connect your printer / HP multifunction peripheral to Ethernet network as opposed to via a USB connector.
  What I found that works so far:

  Start-> programs-> HP-> [Look for your device]-> add device

  The above should get your unit added in.
  Once your printer is added in, go to the screen of 'Services' (start-> Run-> "services.msc")...
  and look for an entry that starts: «HP CUE...» ».  Double-click it, and then click on "Stop".  And then change the Startup Type of "Automatic" to "disabled".  So far, which prevented my printer to disappear again.

  HTH,
  JW