Position of cursor/Cycle not full resolution

Similar Questions

• Positions the cursor can not extract the subset of waveform

  Hello

  I try to get two positions the cursor on a graph of waveform for the entries for the code below, which will start a process that will analyze a subset of the wave. The two sliders define the start and endpoint for the waveform (cursor 0 is the starting point, slider 1 is the endpoint). However, I have questions as Labview continues to tell me that the values I have chosen are not the integer multiples of dt. I don't know what it takes to avoid this problem. I tried to get cursor plots are of unique land types so they snap to the values x (I guess it's that simple concession means), but it makes no difference. Note that there are 2 slots originally going to this graph of waveform (waveform original and medium), but the selection should be only one of them (single parcel is attributed to original waveform). Help, please!

  Edit - just a quick update. I noticed that if I re - run the VI and activate this part of the VI that supports the subset of waveform, I actually get what I want. So, I guess that I don't put something correctly in another part of the VI where I have a structure of the event that updates the position of the cursor in numerical indicators. Could be the problem?

  I solved the problem. Have the two sliders on the plateau at the only plot on the original waveform should have prevented this problem, but I didn't notice that I was feeding in an another waveform beforehand which automatically changes the assignment of the cursor, causing my problem.

  Now cursors remain set on the only ground I want after a few adjustments.

• Videos and photos full resolution will not download

  My iPhone has the option 'download photos in full resolution' is enabled. I decided to do the same thing for my iPhone but when I went to the photos app on my ipad, he said not "enough space". I had 22 GB of free space on my ipad. My library is only 17 concerts. But it refuses to download videos and photos in full resolution. I even tried turning off iCloud photo library, remove all local copies of my photos and videos, turn it back on and selecting 'download full resolution '. Same question. My next option is to restore my iPad for a clean install, but I rather not do. Any ideas?

  Performing a restore of backup can erase some extra storage space, but...

  Download a library of 17 GB, the memory load to the Photos app, on a device with only 22 GB of free space will leave enough space free work, so the warning is OK - you have not enough free storage.

  Go to settings > general > storage & use iCloud > storage management and see if you can remove some unused documents and apps to create more free space. Otherwise, use an optimized library and full resolution images will be downloaded when you need to view or modify.

  -----

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• U2913WM monitor is not displayed in full resolution

  I just bought a U2913WM monitor. I have a HP Envy 700-050 computer with 1-port DVI - D DVI port and 1 - I have the port. I checked with Intel to see if my advice on graphics Intel HD 4000 would deal with the monitor. It can, but I'm onlt get resolution of 1920 X 1080. I called Dell and they don't have a clue and told me to call Microsoft. Or they won't help me. I paid a lot of money for this monitor and want to work without having to buy a new graphics card. I also plugged on another computer that has a high end graphics card and it pulled the full resolution. So I know that the monitor is good. I tried with a DVI - D to HDMI cable and it has yet to get the full resolution.

  Can someone help me with this problem?

  We know that U2913WM DVI - D port 2560 x 1080 60 Hz. looking at the back of the HP Envy computer 700-050, you should connect to the bottom port DVI - D, DVI not top-fitting =

  

  Your installation must be this =

  HP Envy 700-050 out--> U2913WM, DVI - D cable DVI - D to DVI - D - U2913WM DVI - D, in the port

  By using this configuration, if the Embedded Intel HD 4000 could lead 2560 x 1080, it would work. But it's not. This means that cannot the onboard Intel HD 4000 or its driver cannot do. The first thing to check so if you have the latest video driver Intel HD 4000 GPU installed.

  Run this easy to use Intel Driver Update Utility and it will automatically tell you if you need to update your Intel drivers and if so, you will be prompted to install. Once installed, click on start - Intel driver update utility - Intel Driver Update Utility 2.0. Then click on 'Auto detect... '. ».

  If you already have the latest video driver Intel HD 4000 GPU installed, your only recourse is to add a PCIe x 16 discrete video card that can run with the 300w power computers.

• I turned on optimizing iPhone storage in my iCloud settings is not to do so. I have still the pictures in full resolution on my phone. Please help I don't want to start deleting photos

  I optimize storage iPhone enabled in my iCloud settings but it doesn't seem to work. I still have the full resolution original on my phone. Please help don't want have to delete photos to free up disk space.

  You continue to have images full resolution until you start running out of space. Then the resolution will change accordingly. Leave it alone.

• Has not made when you select "Full resolution", but "Half of the resolution" makes successful

  I'm trying to make a model to the best Quality + full resolution. It starts rendering, but it always fails at 00:00:09. When I visited the best quality + half resolution the whole comp renders successfully - no problem whatsoever.

  
  

  Also when I RAM Preview at full resolution, it only presents in preview the first 9-10 frames. When I saw RAM to half-Res, it presents in preview the model together successfully.

  
  

  I also tried to make a model full resolution of a completely different project file and it works fine on my machine.  So the problem seems to be related to this particular project file.
  
  

  Any help is greatly appreciated!
  
  

  So far, I have tried all these things in order to troubleshoot:

  -on EI, click Edit > purge >, then try to make it.

  -Restart ae, and then try again

  -preferably from memory and caches, clear all caches, and then try to make it.

  -restart the computer, and then try to ae.

  -Run disk utility (applications/utilities) and repair permissions.

  -remove the ae file (Users/username/Library/Preferences/adobe/after effects / version #/ adobe after effects (worm) Pref.)

  -restart the computer, and then try to ae.

  
  

  Æ make Specs:

  Model size: 768 x 1366

  Best quality, full resolution,

  Disk cache: read-only

  Frame of merger on checked layers

  Field rendering: power off

  Motion blur: on for checked layers

  : Duration Comp
  Frame rate: 30

  
  Layer effects used:

  Depth of field FL

  Glow

  CC light sweep

  Starglow

  Tint

  CC Vector Blur

  Curves

  Colorista II

  Vibrance

  Gradient ramp

  System Specs:

  iMac (27 inch, mid 2011)

  Intel Core i5 at 2.7 GHz

  32 GB at 1333 MHz DDR3

  AMD Radeon HD 6770 M 512 MB

  It turns out that FL depth of field is the culprit! I have to recreate the look with a different blurring effect. Thanks for the quick replies guys!

• Determine if the full resolution pictures Srored on computer.

  I've been using my Mac with "Mac storage optimization" for storing photos in iCloud. I want these pictures to the iCloud for my wife, a different Apple ID account. My underetanding is that the photos can be trasmet to an iCloud to another account on the back-end iCloud. So the best optoon seems to be to connect to her iCloud on my Mac account and upload photos to her iCloud by using Photo account. My question is how can I now that the upload will be pictures full resolution and not the photos low-resolution bit bulky?

  Hello D.Pass.

  Thank you for using communities Support from Apple. I understand that you want to export all or part of your photos in the Photos app from your iMac to an other iCloud account. I'm happy to give you advice on how to achieve this.

  There are two ways this could happen.

  First option is to disconnect from iCloud in your user account in the iMac, and then sign in with your wife iCloud account.

  Since you currently have the "optimize Mac storage" turned on, you will have all of your photos and original videos on your iMac. To download the pictures and videos on your original iMac, make sure you have enough storage in your iMac to upload all your pictures, open the Photos app, choose Photos > Preferences, and select to download the originals of this Mac. Wait until all photos have been uploaded. Then log on your iCloud account in system preferences > iCloud.

  Now, you can connect with your wife iCloud account. And configuring iCloud photo library in the iCloud in system preferences options panel > iCloud.

  Second option is to export all your photos from the Photos app in your user account. Then add them too account app picture of your wife to its user, if his account is in the same iMac, or another Mac or PC.

  Here is an article with detailed instructions on how to export photos from the photos app:

  Photos for export of OS x: photos, videos and slideshows

  Kind regards.

• After restart some apps not full screen more

  Hello

  Why did after a reboot and by selecting the check box which says reopened windows after restart open before restarting applications are open, but many of them have lost being mode full screen, even if they were before the reboot.  Any ideas?

  A reboot opens only the previous windows in the default position, not full-screen.

  Control-command + F after reboot will change the view Mode to full screen.

• Enough storage but still no full resolution Photos Please HELP me GUYS! : ()

  so here's my problem.

  in my iCloud, I got about 29, 7 GB of photos. 4640 pictures and 517 videos.

  on my phone it says 30, 4660 535 1 GB photos and videos.

  so first of all, I got 10 GB of storage in my iCloud left, why he isn't back from the photos a vids upward?

  but the biggest problem is the following. I got about 9 GB of free storage on my iPhone 6. The settings are on "full Resolution of store.

  But if I'm turning the icloud photoservice die (because it is * terryfiing and I want to go back to the classic backup) it says "500 coulnd't photos and videos stored on the device.» va overview of low resolution should be deleted. WTH? Is there enough storage on my freakin device? Please help me guys.

  I can just reset my phone cause there a photos not ok icloud and I can't coast round it out because there is a picture not ok on the phone. and every time I want to look for a picture of a few weeks, that it loads icloud is so boring. I curse the day I activated the function...

  Have you checked the album "recently deleted?  You may have items there are still in need of storage. Try, if empty this album will allow to download all items. If you can free storage in this way, try again to turn pff iCloud photo library.

  Before you turn off the iCloud service, disable 'Optimize storage', it is now possible and wait for the items to download to your iPhone.

  If it still does not work, you have a computer as well?

  Then connect to your iCloud to www.icloud.com web page on your computer and launch the Photos.app it.

  The Photos.app allows you to download all the photos and videos in a folder on your computer to back up everything on your computer.   Once you are sure you have copies of work of all the photos and videos remove some of the pictures that you don't need on your iPhone using the web interface.  Delete enough information to be able to disable 'optimization of the storage.

• How to export a full size, full resolution Photos photo?

  Background:

  I am a very literate Mac user, but have NEVER used iPhotos or Photos - initially because I didn't like how they seized my photos and hid in a place where it took an expert user to show me where they were.

  Meanwhile, my cousin, who is 77, has all his pictures in Photos.  They were originally in iPhoto, but after that its database has become corrupted and all the photos that have been "disappeared": she spent several hundred $$ to Apple store for them to create a new database and search and restore all the pictures, (of course all its manifestations and albums "disappeared" in the process) she ended up with 6 or 7 duplicates of many of his photos and told to go home and remove duplicates that she tried to fol (its 3000 original photos became 15 000 pictures after the "repair")

  During this time, she would be now as export a couple of full-size, full resolution photos on his desk so that she can download them to print.  Could someone guide me please for a quick and simple tutorial on how to achieve?  I may go beyond helping him do this tomorrow and could probably figure it out - but it would be great if a kind person could tell me how to do this for her.

  Thank you and happy holidays to you all.

  Hi Pariseau,

  That's what I do, there are probably other ways.

  (1) in the Photos, click on the image to select it, click the 'invisible' box below and type a recognizable title:

  

  (2) press ENTER, leave the selected image and pull down the file menu:

  

  (3) choose export > export then 1 Photo... (or to the Unmodified Original export... If you have changed the original and that you want to export an unedited version.)

  You will get this window:

  

  You can switch between different file formats, but by selecting a JPEG quality and size will give you the biggest and least file compressed.

  Under file naming, choose use title so that your exported file will have the name you gave it in step 1. Click Export.

  (4) you will then get a dialog box that allows you to choose the folder in which you want to export to, but crucially (and wrongly IMHO) does not allow you to name the file at this stage:

  

  But you are good to go because you gave the image of a title in step 1, then choose a folder (office here) and go ahead and click Export.

  This is where your photo will end up, and it should be the same size as the original:

  

  Hope this helps, happy holidays to you too.

  H

• Lightroom Mobile downloads the full resolution, but I still need web access to display?

  I have a catalog, Lightroom together to synchronize with the clouds and the Mobile Adobe Lightroom on my iPad Pro. The pictures are on my iPad, and it says there is no change to sync. I have the ability to download all of the files full resolution. When I click on a photo, however, the points on the clouds appear for a few (sometimes several) seconds while I wait for the smart preview for rendering. If I disable the WiFi function, it will not be rendered.

  What is the point of downloading images full resolution if I have to still wait for the app to talk in the cloud? How can I get photos on my iPad I can quickly browse and rate, reject, etc.. ?

  You have activated the edition offline for this collection?

• shows different images on the same chassis with half and full resolution

  In the same framework, don't know why I'm using half resolution or high resolution, the same show different picture frame

  sometimes half resolution shows the picture right on some frames, but sometimes not, and vice versa.

  for example.

  at 02:00 I put picture called "pic5" on the chassis, but full resolution shows the photo of "pic6", and although I use half of the resolution to see a preview, it shows "pic5.

  but at 03:00 I put picture called "pic4" on the chassis, full resolution shows the 'pic4' photo, but half resolution to preview, it shows "pic5.

  and while I'm making, it uses the result of full resolution

  I had used Edition > purge > all memory and hidden, to address this problem sometimes, but not everytime.

  How do I do with it?

  I had used edit > purge > all memory and hidden, to address this problem sometimes, but not everytime.

  How do I do with it?

  Well Yes, it is a cache problem. You should try to remove all your cache completely-> memory and disk cache preferences

  

• How to export Images in full resolution on CD/HD or

  I noticed that when I transferred RAW images on a CD that JPEGs are considerably reduced.

  The setting I used were the following:
  Burn JPEG files full size

  Quality 100

  Resolution 300

  I have the Nikon D750 which is a 24.3 Mp and only shoot in RAW.
  Transferring the images (those not cropped significantly) (in JPEG format) around 8-9 pm

  What should I do to get the transfer in full resolution on a CD, office computer or a file?

  Thank you

  Greg

  If you uncheck "Resize to fit", you will get a file full resolution.

  Jpg is believed to be smaller than the original RAW. Jpg is compressed. If you mean that the export is 8-9 megabytes (not megapixels), that's probably correct, it's a file full resolution.

• Is it possible to draw pixel and the SNES on top a picture full resolution in Photoshop or any other program?

  Hello. I was wondering if it is possible to set a picture (at full resolution) as a background and draw on it with pixels. For example, if I have a picture of a mountain. Could I add that in Photoshop and shoot to make 8-bit?

  It is an interesting question.

  You can do several strategies:

  1. If you want to go in the artistic sense, make a square using the tool brush pen, not the Brush tool.
     Then always change the color and the tool selector pen to color and put the color in the photo.
     As an aid, you can use the raster leaders who have the same distance as the size of the enclosure.
  2. The next strategy is the Pixelate filter (Mosaic): How Pixelate in Photoshop - YouTube
  3. Another strategy is to resize the image. Firstly the scale down, to create the actual pixels. And then scale upwards, but with the option of the nearest neighbor.

  Have fun.

• The mouse cursor is not where is the entrance?

  In the text boxes in websites like Codecademy my cursor is not here where I give input keyboard!

  Is this a new issue after upgrading Windows 10?

  40 Firefox, scheduled to be released soon, will contain several fixes compatibility for Windows 10, so I hope it helps if there is no other explanation or fix for Firefox 39.