Possible NB520-108 - increase RAM to 2 GB?

Hello

I don't want to increase the RAM which comes with the NB520-108. I know that one is 1 GB memory DDR3 at 1,066 MHZ. I can't find this speed, and my question is: can I put a 2 GB of DDR3 memory module 1.333 MHZ?

Thanks to everyone in advance.

Kind regards
Ricardo

Hey Buddy,

I checked the specs on official site Web from Toshiba, and Yes, you can upgrade the memory up to 2 GB. That s the maximum capacity for this model of netbook.

Installation of a module DDR3 at 1333 MHz is not a problem that faster because modules are compatible downgrade. This means that the module memory would go with 1066 MHz, but that s, no problem. The laptop will automatically be the clock speed.

Tags: Toshiba

Similar Questions

  • NB520-108: distorted sound on the video in full screen

    Hello

    I have a harman / kardon nb520-108 (I hope I have the right forum!) and when I maximize the screen on youtube or iplayer say I get a sound distortion.

    I read somewhere that the bios needs an update but I need confirmation of this if it's like the side effect is that it means an installation of the sound system.

    Any ideas what this could be?

    Thanks in advance,

    Alex

    Hello

    The distortion of the sound appears only videos streamed from the internet or have you noticed this problem too play videos from the DVD or HARD drive?

    Would it be possible that the distortion of the sound is because of the internet connection is slow?

  • Is it possible to upgrade the RAM on the Aspire One Cloudbook 11?

    I was wondering if it was possible to upgrade the RAM or any which component of memory on my laptop to improve its performance. Currently, my system works fine, I am just worried because it does feel like the system is running close to it's maximum capacity. I don't want to burn it. Thanks in advance for any comments that will be offered to the top.

    Hi usagent86,

    In any case to upgrade memory MEM to 64 GB?

    No 32 GB mem is directly soldered on the motherboard.

    Running out of room after all the updates from microsoft!

    Sorry, but what you mean? MEM is full?

  • is it possible to add more RAM to my Sony Vaio laptop?

    Is it possible to add more RAM to my Sony Vaio laptop.  I have an Intel Core 2 Duo CPU P7450 @2. 13 GHz; 6 GB OF RAM; the 64-bit op system.

    Thank you

    Sally

    SallyBell,

    Please check the specs. to use this device on our esupport maximum RAM allowed... If it's a non American unit, please provide the exact model name.

    If my post answered your question, please mark it as "accept as a Solution.

  • IdeaPad s300 increase ram of 4 GB to 8 GB or 16 GB

    I have 4 GB of ram in my model, it is possible to increase the RAM of this model? How many benches available memory for me? where I had 2 that I need to adapt to a 8 GB or 12 GB in total that I have to take it by force to another 4 GB? Thanks, sorry for my English

    Good day and welcome to the community.

    You can download the manual of your equipment:

    http://download.Lenovo.com/consumer/mobiles_pub/ideapad_s300_hmm_1st_edition_jul_2012.PDF

    Looking at page 37 of the manual, it seems to me that you have only one DIMM connector. I have no personal knowledge whether it is compatible with a 8 GB DIMMS, but there is at least a report that pretend to work here:

    http://forums.Lenovo.com/T5/IdeaPad-S-series-netbooks/S300-RAM-upgrade/TD-p/951675

    I hope this helps a little.

    Kind regards.

  • Is it possible to mix the ram on Satellite M50?

    Hello

    Anyone know if it is possible to mix the densitys of ram in a computer M50-159. It has already installed 512 MB and I want to add 1 G. Would there be problems by doing this, or I have to install two sticks of the same amount (e.g., 2 x 1 G)?

    Thank you
    Oliver

    HI Oliver,.

    There's no problem mixing different modules of your laptop RAM capacity. a combination such as 1 X 512 MB and 1 X 1 GB would be perfectly acceptable. The only time where you would have met problems, is if you try to mix different types of memory modules to live where the speed or other attributes are not compatible.

    Kind regards

  • Satellite L50-A-108 - what RAM modules are compatible?

    Hello!

    I have a C50-A-108 with processor Intel® Core i5 - 3230M (3 m Cache, up to 3.20 GHz) rPGA.
    I want to add a stick of RAM, and I wonder if this specification: DDR3/L /-RS 1333/1600 for my motherboard means that I can use a RAM DDR3L.

    My laptop has already installed a DDR3 RAM (1,600 MHz), so I found a stick DDR3L 1.5V 1,600 MHz with the same timings as my system and I want to buy it. Before that, I want your opinion.

    Thank you.

    Hello

    To my knowledge, the Satellite L50-A-108 was equipped HM70 mobile Intel Express Chipset. Is this correct?

    Express chipset mobile Intel HM70 supports 2 GB modules / 4 GB / 8 GB DDR3 1333 (PC3-10600) SO-DIMM and max 16 GB of RAM

    The Intel Core i5 - 3230 M CPU processor supports DDR3/L /-RS 1333/1600 modules and the speed of the module is related to the speed of the front side bus.
    http://Ark.Intel.com/products/72164/

    In the case where the FSB is limited to 1 333 Mhz, 1600 Mhz modules would be pointing down.

  • Satellite 35DVD - increase RAM

    I want to increase the RAM in my 35DVD, but it is not clear how to access the locations of memory. Can anyone here help with directions please?

    TIA

    Russell

    Hello

    It seems that the memoryslot is located under the keyboard. It must therefore take the machine part to mount a memory module.
    Be aware of the fact that it can take maximum total 192 MB. It has 64 MB fixed on the Board. This means that you can add max 128 MB and if there are already more than 64 MB in your system then you will need to remove this extra memory to be able to achieve a maximum memory capacity.

    Good luck

    Tom

  • Increase ram > battery

    Hello

    increases the speed of the ram decreases the life of the battery of your laptop because mine has been upgraded to 1 GB

    Hello

    I can't imagine that the upgrade memory has much effect on the battery. But anyway, you can try to reduce your memory and look at the battery.

    Good bye

  • increase ram g6 1147sl

    can I increase the ram of 4 GB on my 1147sl? I want 8 or 16 GB
    If so what kind of ram I need to buy? Thank you

    It is likely that you have 2 x 2 GB. Open the door of memory on the bottom of the machine to check. In this case, you need to replace what you have, and you need all of the 8 GB; 2 new modules. If you happen not to have that one module 4 GB (unlikely), you just need one or several people. Look at Page 52 of this manual for instructions.

    Your manual

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Lenovo Z50 - 70 increasing ram for the gpu

    Hello!

    I have Lenovo z50-70 with amd Kaveri 7300 A10 and GPU R6 (all together known as RADEON Jet R6 M255DX). It has 1 GB of ddr3 ram allocated. Since I increased my ram I want to increase the ram on the gpu. How can I do?

    arotex wrote:

    Hello!

    I have Lenovo z50-70 with amd Kaveri 7300 A10 and GPU R6 (all together known as RADEON Jet R6 M255DX). It has 1 GB of ddr3 ram allocated. Since I increased my ram I want to increase the ram on the gpu. How can I do?

    In the old days, I remember that there is such a condition in the bios. However, I can't find in my Z500. Check the bios in your case.

  • How to increase ram on my toshiba c660 - 18 c

    the ram on my toshiba C660 - 18 c is (1 GB) Iam said that ram should be at least (2 GB)

    can you please tell me how I do this increase in ram please

    concerning

    Ron Flynn

    Hello Ron,

    This question would be better directed to Toshiba as they will be more familiar with the hardware architecture and which is compatible with the machine on a hardware level.

    Best regards

    Matthew_Ha

  • increase ram 2 gb 6 GB shared memory does not increase

    I upgraded my ram that 2 GB to 6 GB but shared memory does not increase

    There are limits to the amount of memory can be used for shared graphics.

    Generally, configuring shared memory allocation is done in the BIOS.

  • Possible to add more RAM, maximum allowed on HP - Compaq Presario SR5233WM?

    HP-Compaq Presario SR 5233WM PC, Windows Vista Edition Home Premium, drive HARD 250, 2.8 ghz and 2 GB of RAM now.   (from 2007ish)

    The specification of State HP 2 GB document.  I've read elsewhere in their manual maybe says 4 GB, but I do not.

    I checked the BIOS page and it shows only 2 slots for the Rams.

    And ran scan from Crucial.com showing 2 GB as max.

    Is it possible to add above stated max 2 GB?  This amount feels slow for this type of PC.  Impossible to find anywhere, any information on the website about it.

    Is there a device that can fix somehow, that would take more memory?

    Thank you very much.

    HP, welcome to the forum.

    No, the motherboard is capable of supporting the 2 GB of memory. There is no way to add any device which will add memory, either.

  • Why vector increase RAM plus table double?

    Hello!

    I have an app simple as3 Web that use Vector. < number > to store the numeric value. But it increase double RAM more table. For example:

    Use vector:

    private var myTest:Vector.<Number> = new Vector.<Number>();
    private function Test():void
    {
         for (var i:int = 0; i < 8192000; i++)
         {
              this.myTest.push(1.0);
         }
         trace("Length: " + this.myTest.length);
    }
    
    // Output: Length: 8192000
    // RAM in Task Manager ~ 65Mb
    

    Table use:

    private var myTest:ByteArray = new ByteArray();
    private function Test():void
    {
         for (var i:int = 0; i < 8192000; i++)
         {
              this.myTest.writeFloat(1.0);
         }
         trace("Length: " + this.myTest.length);
    }
    
    // Output: Length: 32768000
    // RAM in Task Manager ~ 32.5Mb
    b
    

    So, why vector increase my RAM double more table. How to fix this?

    Thanks in advance!

    a bytearray is not an array.

    If you compared to your use of vector with the use of ram ram a table, you will find that the vector uses less ram than the table.

    so, the real question is why a bytearray uses so much more efficient than an array and vector ram.  answer from the help files:

    The ByteArray class provides methods and properties to optimize reading, writing and working with binary data.

    Note: The ByteArray class is for experienced developers who need to access the data on the byte level.

    In memory data are a packaged (the most compact representation of the data type) byte array, but an instance of the ByteArray class can be manipulated with standard [] operators (access to a table). It also can be read and written to a file in memory, using methods similar to those in the URLStream and Socket classes.

    PS use scout to the flash profile, not the Task Manager.

Maybe you are looking for