Post 4000

Similar Questions

• Portege 4000 - upgrade RAM & graphic card driver installation

  I'm having some trouble with my Portege 4000 for the moment. I installed XP on a disk, but will no longer have that I have 256 MB of RAM...

  -Have you tried 2 manufacturers but the PC133 512 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  -Consider the options alternative to XP, 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?

  -J' put another post for .exe drivers related to the display/vga for 98SE and 2000.

  -Just for the record, not all Linux distributions seem to go back on the size of the screen, so it takes some work...

  Thanks much for any help.

  > Tried 2 manufacturers but the 512 PC133 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  The protégé 4000 is compatible with the PC133 modules! AFAIK, you can upgrade RAM of this notebook 1 GB (1024 MB) and you can use these modules;
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  > Considering alternative options to XP, namely 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?
  You can create partitions on the HARD drive using a 3rd party like Partition Magic 8 tool. I use this tool and it's really nice.
  After you create 2 or three partitions on the HARD disk, you could install different OS (operating systems).

• G510 i3 - 4000 M Wifi

  In my new lenevo g510 i3 4000 M, I installed the windows 32 bit 8.1. There is no use of the F7 key with a plane on the keyboard sign. FN + F5 or Fn + F7 worked since the beginning of the day, I bought this model. I've never used the keys. I also tried with win 7, but no positive result. I tried with all the drivers from the supplied DVD and the link of lenevo installtion. Should I change the laptop or I'm wrong somewhere?

  Hi aminduwal,

  Thanks for posting, instead of using the DVD drivers could uninstall you the Lenovo energy management and install the Lenovo energy management from the link below?

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035251

  hope this helps and do post back with your results.

  Concerning

• MC7750 Lenovo Gobi 4000

  I bought a Lenovo Gobi 4000 MC7750 (Lenovo P/N 0B 42409 FRU PN 04W3791)

  The device is labeled "Sierra Wireless | Process ".
  She throws 4 devices in Device Manager.
  Are hardware ID: Vid_114f & Pid_68a2 & MI_00/02/03/08
  I tried to install the driver, it seems no matter what I do
  Since it is a Lenovo brand card and there will seem to have a knack for doing things to work when they are not supposed to I thought I could post it here and see if you have any suggestions.

  Thank you

  1. even once, mc7750 does not work in Etisalat LTE network. Even if the drivers will install correctly with the Etisalat sim card you won't see and do nothing.
  2. what elements related to the mc7750 do you see not in Device Manager? Who is the exclamation point?
  3. what operating system is installed on your laptop? that you install the drivers?
  4. is the large map mobile broadband enabled in the window of control Fn + F5? Lenovo access connections is installed?

• Y580 GTX 660 m & HD 4000 supported Technologies?

  Hi again, I have another question on my new Y580 and his GTX 660 m. NVIDIA posted: support technology: 3D Vision, CUDA, DirectX 11, PhysX, Optimus, OpenCL, DirectCompute.

  When I open the GPU - Z (with my gtx 660 m running) on the bottom, I don't get the DirectCompute box checked, it's normal, I need to download something? Because I have checked on the HD 4000 despite what GPU is currently active.

  Thank you.

  I installed the beta geforce driver and now the box is checked.

• No CD-ROM with ergonomic keyboard 4000, then things do not work

  Hello Allayas!  :-)

  OK, so I recently bought a:
  Microsoft 4000 ergonomic keyboard

  Only problem is that it didn't come with the CD-ROM, which usually has the drivers, other software/freeware and instructions and so on and so forth.

  IE: for example -.

  • I can't use 5 programmable keys at the top of the keyboard, in the Center, and I think ' they are supposed to be the most important because of their location and so on.
  • The Zoom slider in the middle of the keyboard is ab-so-lute-ly, nada! [Samething goes for the key with the big star on this subject.]
  • Almost all the buttons do nothing. Not at all.
  • more there are things written on the front of the keys, I have no idea what to do with them. They have words like: {copy, paste, cut, search, save, all pointed out, new open, print, italics and they also} a few buttons that work, like, on the F12 key, it says 'print', well I say is for printing

  Is it possible that I can get a 'friend' to post, so I can download the contents of their CD, as everything in a folder and let download me, or you can send it to me to.

  Thank you very much

  I'm Brucie, Morano

  E-mail address is removed from the privacy *.

  P.S. - Do not hesitate to write me a note or an email, if you want to help me oout, OK?

  Hello

  Natural Ergonomic Keyboard 4000<- drivers="" and="" other="" help="" -="" set="" to="" your="">
  Windows under the heading downloads

  https://www.Microsoft.com/accessories/en-us/products/keyboards/natural-ergonomic-keyboard-4000/B2M-00012

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

  Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

  the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

  I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

  (tried mousinfo in program files, on the left the button does not)

  I thought to open for cleaning before I found you I can send help or advice...

  What should I do?

  far I could found the exit of microsoft or repair center

  I liked the 5 X zoom option which miss me most...

  Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

  very appreciated

  Hello Rabbi,

  1. you remember to make changes to the computer before this problem?

  2 have you tried the mouse on another computer?

  Method 1:

  Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

  a. Click Start, point to settings and then click Control Panel.

  b. double-click system click on hardware and then click Device Manager.

  c. click on the PLUS SIGN to expand unit

  d. double-click on the mouse driver.

  e. tab driver, click on uninstall

  f. restart the computer and check

  See the following article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Method 2:

  If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

  See the following article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LaserJet 4000 printing error with USB/parallel interface and DATA light on at all TIMES

  Laptop Dell Vostro 3700, Windows 7/32, Laserjet 4000, connected via the USB interface cable / parallel on USB001. Interface drivers and printer installed automatically after starting the update of Windows PC.

  Single document print OK.

  Document of several pages: printer data LED flashes then REMAINS ON permanently. Printed front page sometimes, sometimes not.

  After some time, box status Control Panel/print poster printer fault and a yellow exclamation point appears on the printer icon.

  No possible mistake OK with MS print Fixit. No other printing possible before initialization of the PC and then to new as shown above.

  Same printer connected via a parallel cable that is normal for old PC Windows 2000 print OK.

  Help, please!

  SOLUTION FOUND!

  A SOLUTION THAT WORKS: add only DC powered USB hub and connect the printer to one of the ports of the hub-s. Let Windows install the drivers for the USB cable and printer and printing is perfect!

  It is that the laptop USB ports do not have enough current or voltage, especially if some other USB devices are connected to the laptop...

• Slow download speed of RVS 4000

  I use a Cisco RVS 4000 to test a new internet connection of 10 M / 10 M.  I'm having a little problem, the test of speed of PSI (speedtest.cavtel.net).  Download test always gives me 10Mbit/s, maximum for the connection speed, but the download speed is usually about 5.5 Mbps. My ISP has been on site and checked the lines and tested directly, and we determined that if connected directly we can test to complete download speeds, but when the RVS is connected, we can get full speed.

  We tried different cables, reset to factory settings, update firmware, change the port settings and toggling the majority of the other setting on the router. Some settings have a minor effect on the speed of download, but nothing that gets me back up to 10 Mbps.

  I noticed that there seems to be no way to set parameters of speed and trading on the WAN port. Perhaps miss me him, because this seems like a possible culprit.

  Otherwise, the only one I can think of is a guarantee of return to determine if the device is defective.

  Any ideas would be appreciated.

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  * Do not forget to give a 'congratulations '. Thank you!

• Error when you try to run 4000 NCLEX-RN: The Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

  ' Microsoft.Jet OLEDB.4.0 error

  I'm running the NCLEX - RN 4000 and get the error message:

  The 'Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

  Someone at - it a link that will allow me to view the program NCLEX - RN 4000 that I installed on my laptop?

  Take a look on...

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/17efa13d-2d16-4F1D-9EA1-302b7a054ecf

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• the usb is stuck on the usb plug on the underside of the mouse, microsoft 4000 wireless mobile mouse

  Well I was being a fool and pasted my usb key to connect the mouse to the computer in a hole and he is now stuck I tried it out and after a little research I discovered that I stuck the USB to the USB jack on the bottom of the mouse, but why didn't he come?

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Microsoft Wireless Mobile Mouse 4000, being stuck on the USB. It must be hard when something that is important to you does not work as expected. I appreciate any effort that would put you in all. I will guide you in the right direction.

  To help you with the hardware components of the mouse, I wish that you contact Microsoft Hardware Support for assistance.

  Check out the link-

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Back to us for any questions related to Products from Microsoft or the Windows operating system. We will be happy to help you.

• Natural Ergonomic keyboard 4000 zoom does nothing

  I installed correctly, the driver began to use the keyboard, it installed more things, then restart Windows. The keyboard and all functions work except the zoom does not have anything in any program. I don't want to scroll or do something unusual, that I just want to exercise the zoom feature that exists in many menus of windows program.

  Hello

  -Have you tried the steps mentioned in the post above?

  If this isn't the case, I suggest you try the steps mentioned in the above post. If the problem persists, follow the steps mentioned below and check if this solves the problem.

  Method 1: I suggest you to follow the steps from the link and check if it helps.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2: Also, I suggest you to install the drivers from the link and check if the problem persists.
  Natural Ergonomic Keyboard 4000
  http://www.Microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000#support

  If the problem persists, I suggest you to contact Microsoft Support for assistance.
  http://support.Microsoft.com/hardware

  Hope this information helps.

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• dedicated on microsoft 4000 keyboard back button does not work with firefox

  Hello-

  I have a microsoft 4000 keyboard.

  He dedicated the buttons back and next to the navigation of the browser: http://xahlee.info/kbd/ms_keyboard/i/ms_n4000_keyboard_LED.jpg

  the back button does not work with firefox

  other info: the next button does not work with firefox. buttons next and previous works with IE, tor and chrome. the keyboard shortcut for back in firefox (alt + left arrow) does not work.

  I've tried clearing cache and cookies and start firefox in safe mode.

  advice?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions only by using the back button in the Firefox browser.

  But I would like more information on this topic in order to help you.

  (1) the back button worked before with Firefox?

  (2) don't you make changes before this problem?

  According to your description, there is no problem with the material since it works with Internet Explorer and Google Chrome. Previous key does not only work with Firefox. Therefore, I would advice you to check with Firefox and see if that helps, because they have more expertise on products here to help you better.

  Support for Firefox

  https://support.Mozilla.org/en-us/products/Firefox

  Hope this information is useful. Please write us back for assistance.