Post Crash issues and Questions

Similar Questions

• I want to change your security questions and do not know the old issues and thank you

  I want to change your security questions and do not know the old issues and thank you

  If you have an emergency email address you can use to reset your questions. This option of rescue should be on https://id.apple.com after connection and asked for security issues. If this is not leading to a solution, call Apple: Apple for support and service - Apple Support Contact

  Be prepared to identify you as the account holder. They will ask you some things, I can't predict what, but usually the serial numbers or credit card.

• How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  [Profanity removed... MOD]

  Hello

  I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Little help General and question about layout theory

  Hello... any help appreciated:

  I am a photographer who has always been a person DIY.  I built a Web site for my work on my own using Dreamweaver and some tutorials online.  He comes back, it works (although a little slow), but the code would, I imagine, most of you take your computers and whiten your knuckles.  In short: it works on the tape, Staples and ideas of jerry-rigged.

  I've watched more tutorials and am rebuiding the site, trying to clean up the code and the site.

  I have a number of questions and issues that I have not been able to solve on my own and so I turn to this site.  I'll post a few initial questions here and even more in the following days.

  I sincerely appreciate the time and help you would be willing to offer.

  1. when I try to preview in Firefox, my computer switches to Firefox, but the site is not displayed.  All that appears is what was the last page I looked at Firefox.  This does not happen for Safari, Opera, etc..

  2 I watched videos on the site, built the site largely with a layout of the Tables and then a page turns with the Table in a template for the pages that follow.  I guess it's a frequently asked question: most people set out sites this way to make... or with the ApDiv?  I feel I'm learning a foreign language by the book... now I wondering how people REALLY speak.  My site is www.tomgriggs.net (look at the code at your own risk).  I provided that in the hope that, if you take a look, you might see a way to layout would work for me better than the other.

  3. What is recommend for my table, wide... I'm focusing on the photogarphers and others who usually have large screens and I want to maximize the space I have for my pictures, but I also want to most people when they visit my site to get the site on their screen.  The solution would only be a percentage based tabular presentation?

  I'll save the other for another day or post questions.  I appreciate any response you have!

  1. There is a known issue with Firefox 3.6.x and preview based on the browser.  It is noted in the Mozilla bug database and has been approved for publication in the next version.  I got the bug number in an old post, but I don't know off the top of my head.

  2 tables are a deprecated feature in Dreamweaver and have been removed from CS4.  So I recommend against learning in this way.  Œuvres of absolute positioning for some cases, but if you want a layout pass little matter that someone has the resolution you will end up with an elastic layout using percentages.  You can use div tags PA in it to achieve some effects.  But most of the time it should be used in some sort of container because otherwise your site will have different appearances according to the resolution.

  That your site is concerned, many will run your site through a validator: http://validator.w3.org/ - HTML, http://jigsaw.w3.org/css-validator/ - CSS.  At the moment your site validates 100% with CSS and has only a single error in HTML format (other errors are related).  Your "and must end with a ' / > '."  Apart from that, everything is in order.  Personally, I like the simplicity of your Web site, although I think you could add a little more to the grey background by integrating one of your images in the background.

  3. return to the table.  Closer look at your code and I see that you have a table around your content with a width of 1134.  Personally I trash and follow these steps:

  Here, all the power to the table remains

  If you get away from the table and move to div and layers, so you can make your more elastic page mentioned in the #2 response.  This code inside the body tag would give you a width of 90% of the visible area and auto margin: 0 would set the margin at the top and bottom of the page to 0 while the auto Center the page horizontally in the window of the browser.  As stated previously, layout tables are obsolete and will be not available in the latest versions of DW from CS4.  So I highly recommend moving ahead of them if you can.  The following resource is a good starting point for CSS ( http://www.w3schools.com/css/ ).  Think about the design of web sites in this way, just said HTML what should appear, CSS says what it should look like when it appears. Based on your current layout, it wouldn't be hard to reproduce this with fewer lines of code using basic CSS layout compared to the current table layout.  If you need an example, I could try to stick something together.  It may take a few days if.

  And if you have any other questions, feel free to post them.   Most of the users here are more than willing to lend a hand.

• NDA issues and copyright?

  Hi Oracle
  
  It seems that some Chinese sites distributing training Oracle that is legal? Or is it a NOA issues and copyright?
  
  the site in question is www.xxx.xxx/ shouldn\t this site closed or at least the materials removed?
  
  I would like to know if I should update this post by removing the site after Brian or another responsible for certification read the site name.
  
  Thank you.
  
  Published by: Hub on November 18, 2009 09:06

  Hub,
  You can send the information to [email protected]. Unfortunately, when we try to close these sites, they still operate within hours under a different name. Be specific in your complaint for fraud of OCP. They will also send some info on legal ORGANIZATIONAL unit to deal with.

  Thank you
  Brandye Barrington

• Firefox crashes randomly and without warning

  Hello

  I have a problem with my Firefox crashing constantly, any Web page I'm on. Sometimes it crashes after I've been online for a few minutes, sometimes it crashes immediately on startup. I just never know when it's going down, but he always does. I completed all the steps listed on the Web site of your support:

     Update your software
         Update Firefox
         Update your plugins
         Update Windows
         Update your drivers
         Update your Internet Security software
     Check for viruses or spyware
     Check to see if the crash happens in safe mode.
  

  I did all that, and the crash always happens in Mode without failure. I am still able to connect for a few minutes between the accidents, but as you can imagine is pretty boring. Your help would be greatly appreciated.

  Sara

  Of course, you have already read Try Firefox plant - troubleshoot and prevent assistance fixing crashes , creating and using a new profile.

  1. While in the questions to troubleshoot Firefox in Safe Mode also disable all plugins
  2. See troubleshoot and diagnose problems of Firefox_8-make-a-new-profile
     • backup your bookmarks and your profile (all folders and files) so that the information is not lost see also
       Restore backup bookmarks or move them to another computer
       Backup and restore Firefox profiles information
  • Your report for CrashID 378ad0fd-2553-4e86-a94b-5ebe22120414
  • Signature of Crash: memcpy | assemblePage

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• Hide: I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now!

  I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now! Anyone know where are the hidden files?

  Go to start / Control Panel / folder Options / view and check the box to show the hidden files and folders and uncheck to hide extensions of known file types.  Only the first is required for this problem, but the other may be useful later and you might as well do it while you're already here.

  Now, you will be able to see the folder.  It will be in the same place, it has always been (it has not been assigned) - it was just hidden and now that you can see hidden files and folders you can see again.  You may notice that it deteriorated a little bit lighter that other records - it is a sign that it is a hidden file or folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have windows 8 and my husband has win8. Can we post appts etc and then be able to view the calendar of each and others without it going throug mail?

  I have windows 8 and my husband has win8. Can we post appts etc and then be able to view the calendar of each and others without it going throug mail? If I post an apt for one or two of us on the calendar, it is possible for him to see and vice versa?

  Hi Candy,

  Thanks for the reply.

  Yes, of course, there is a way to put the appointment both of your calendars. When you use the same account Microsoft to connect both computers, the changes made in the calendar by a user is looking at another user's calendar. So, if your husband books calendar for an opportunity, then you will be able to see it.

  Feel free to get back to us any time for other issues related to Windows.

• Lines and questions of keyframe in CC 2015.3?

  Hello

  I'm working on a project in first Pro CC 2015.3 in which I'm masking text to make a character to pass in front of it, but I have two problems:

  (1) the text contains lines going through it. These lines appear in the dialog box export and rendered files, but not in the Premiere Pro project.

  (2) in the export the rendered files and settings dialog box, there is also an additional framework which is part of the text to reappear suddenly. It does not match what I've hidden and is not in the project overview.

  The screenshots below to view the issue:

  Premiere Pro project Preview (planned)

  Export settings

  Rendered file

  I hope you can help because it's very frustrating.

  Thank you!

  Good, if someone happens to fall on this issue and it is as big an idiot that I am, here is how to solve this problem:

  (1) I had additional keyframes beyond the end point of my text (a remnant of the follow-up) clip, which has been morphing my mask. Remove these keyframes solved the problem.

  (2) I had my export settings value "Source Match", which included a configuration of the field of "Superior" first order, so it has export an interlaced. I changed the setting of the export in progressive and now everything works as expected.

  It was hours of grief for what turned out to be a simple question... Sigh.

• X 99 SATA issues and more

  Good evening everyone,

  I'm about to embark on my new build and I need some advice and clarification.

  Here is the final list of the pieces sitting in my office:

  ASUS	Mobo	x 99 Deluxe
  Intel	CENTRAL PROCESSING UNIT	5820K
  G.Skill	DIMMs	F4-2666C16Q2-64GRB
  Samsung	O/s disc	MZ-7KE256BW 850Pro
  Samsung	Project reader	MZ-V5P512BW 950Pro NVMe
  CoolerMaster	CPU Cooler	Hyper 212 x DF
  Gigabyte	GPU	GV-N970XTREME-4GD
  EVGA	POWER SUPPLY	220 G2-0850-XR
  Star Tech	IEEE 1394	PEX1394B3 PCI Express

  Issues related to the:

  1. the desired position of the TPU switch? Offshore, or CPU Ratio Boost or BCLK CPU + report thrust? I want to o/c after that I know that everything works and is stable. That's why I chose the cpu 5820.

  2. the position of the switch of the desired UPR? On - Off or moderate consumption? Why ASUS gives the option?

  3 desired switch EZ XMP? Disabled or enabled? Is this related to the choice of the position of the TPU switch?

  4. CPU Over rider? By default (pin 2-3) or the increased tension (pins 1-2) is the decision somehow related to the software ASUS o/c?

  5. is it recommended to install "way 5 optimization" software "Intelligent two 5 '? That would seem to have a relative to the position of the TPU, UPR switch but the document never does this connection so to speak.

  6.I am struggling to wrap your head around the different SATA connections. We have SATA6g, SATA Express, ASMedia SATA Express. I read the posts where Eric and Bill, others have said where to establish the connection of the HARD disk, but I would like to understand the difference. In addition, I noticed that two of the SATA connectors are different than others.

  7. should I I anticipate possible problems of implementation is 950Pro?

  I appreciate the efforts of the group to help clarify so that I can learn. Maybe others have had the same or similar issues.

  These switches are intended to allow firmware frequency setting boards and ratios. I turn them off and use the bios settings. The software is to control the parameters of the bios of Windows compared to their definition in the bios. The software on average is fine but will cause problems with the audio editing software if you record and edit audio projects as well.  You want to connect Sata drives on the Intel controller, which is the primary controller. The m2 will connect the controller Asmedia Sata Express without worrying. The Pro 950 will work as a normal drive since you not put the operating system on it. Just the format in Windows.

  Eric

  ADK

• What are the issues and how can I put the documents in the files?

  As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

  I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

  I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

  I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

  What are the issues and how can I put the documents in the files?

  I created a few files like this:

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
     <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="FLD_CREATE_FOLDER">
  <Document>
  <Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
  <Field name="fPath">/RAFT/Appraisals/</Field>
  <Field name="fFolderName">0111234567</Field>
  <Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
  </Document>
  </Service>
  </GenericRequest>
     </soapenv:Body>
  </soapenv:Envelope>
  

  Here's a sample call:

  The virtual path is/Appraisals/0111234567 /.

  The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

  I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

  When I run this it stores the file but the file does not appear in the folder.

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
       <soapenv:Header/>
  <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="CHECKIN_UNIVERSAL">
  <Document>
  <Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
  <Field name="dDocType">Document</Field>
  <Field name="dSecurityGroup">Public</Field>
  <Field name="dDocAccount"/>
  <Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
  <Field name="xFHACaseNumber">0111234567</Field>
  <Field name="xFHADocumentType">Appraisal</Field>
  <Field name="dDocTitle">tuesday2document.txt</Field>
  <File name="primaryFile" href="whereami.txt">
  <Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
  </File>
  </Document>
  </Service>
  </GenericRequest>
  </soapenv:Body>
  </soapenv:Envelope>
  

  Returns:

  <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header/>
     <env:Body>
        <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
           <ns2:Service IdcService="CHECKIN_UNIVERSAL">
              <ns2:Document>
                 <ns2:Field name="reserveLocation">false</ns2:Field>
                 <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
                 <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
                 <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
                 <ns2:Field name="dDocType">Document</ns2:Field>
                 <ns2:Field name="scriptableActionErr"/>
                 <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xWebFlag"/>
                 <ns2:Field name="dDocCreator">C03999</ns2:Field>
                 <ns2:Field name="dDocAccount"/>
                 <ns2:Field name="xClbraUserList"/>
                 <ns2:Field name="dLocation"/>
                 <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWebExtension">txt</ns2:Field>
                 <ns2:Field name="isNew">1</ns2:Field>
                 <ns2:Field name="IsQueryObjectPersistent"/>
                 <ns2:Field name="xWCTags"/>
                 <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
                 <ns2:Field name="dClbraName"/>
                 <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xClbraAliasList"/>
                 <ns2:Field name="dActionMillis">72487502</ns2:Field>
                 <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
                 <ns2:Field name="dIsPrimary">1</ns2:Field>
                 <ns2:Field name="isInfoOnly"/>
                 <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xWCPageId"/>
                 <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocID">1216</ns2:Field>
                 <ns2:Field name="dPublishState"/>
                 <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
                 <ns2:Field name="doSorting">0</ns2:Field>
                 <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevisionID">1</ns2:Field>
                 <ns2:Field name="xExternalDataSet"/>
                 <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
                 <ns2:Field name="UseForwardOnlyCursor"/>
                 <ns2:Field name="noDocLock">1</ns2:Field>
                 <ns2:Field name="dID">1208</ns2:Field>
                 <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xPartitionId"/>
                 <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="dDocOwner">C03999</ns2:Field>
                 <ns2:Field name="dUser">C03999</ns2:Field>
                 <ns2:Field name="isDocProfileUsed">true</ns2:Field>
                 <ns2:Field name="scriptableActionParams"/>
                 <ns2:Field name="dpEvent">OnImport</ns2:Field>
                 <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
                 <ns2:Field name="DocExists"/>
                 <ns2:Field name="dConversion">PassThru</ns2:Field>
                 <ns2:Field name="StatusCode">0</ns2:Field>
                 <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dStatus">DONE</ns2:Field>
                 <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevClassID">1208</ns2:Field>
                 <ns2:Field name="idcToken"/>
                 <ns2:Field name="dRevLabel">1</ns2:Field>
                 <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xStorageRule">webasset</ns2:Field>
                 <ns2:Field name="localizedForResponse">1</ns2:Field>
                 <ns2:Field name="dPublishType"/>
                 <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
                 <ns2:Field name="dFormat">text/plain</ns2:Field>
                 <ns2:Field name="scriptableActionType">3</ns2:Field>
                 <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
                 <ns2:Field name="dpAction">CheckinNew</ns2:Field>
                 <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="refreshMonikers"/>
                 <ns2:Field name="xWCWorkflowAssignment"/>
                 <ns2:Field name="isEditMode">1</ns2:Field>
                 <ns2:Field name="refreshSubMonikers"/>
                 <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
                 <ns2:Field name="changedMonikers"/>
                 <ns2:Field name="dRevRank">0</ns2:Field>
                 <ns2:Field name="StorageRule">webasset</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList"/>
                 <ns2:Field name="xComments"/>
                 <ns2:Field name="dAction">Checkin</ns2:Field>
                 <ns2:Field name="isDocProfileDone">1</ns2:Field>
                 <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dRawDocID">1215</ns2:Field>
                 <ns2:Field name="xLibraryGUID"/>
                 <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWorkflowState"/>
                 <ns2:Field name="dProcessingState">Y</ns2:Field>
                 <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dDocAuthor">C03999</ns2:Field>
                 <ns2:Field name="dOutDate"/>
                 <ns2:Field name="dIsWebFormat">0</ns2:Field>
                 <ns2:Field name="scriptableActionFlags">12</ns2:Field>
                 <ns2:Field name="isCheckin">1</ns2:Field>
                 <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
                 <ns2:Field name="dExtension">txt</ns2:Field>
                 <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="prevReleaseState"/>
                 <ns2:Field name="isStatusChanged">1</ns2:Field>
                 <ns2:Field name="dReleaseState">N</ns2:Field>
                 <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
                 <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dFileSize">19</ns2:Field>
                 <ns2:Field name="xIdcProfile"/>
              </ns2:Document>
           </ns2:Service>
        </ns2:GenericResponse>
     </env:Body>
  </env:Envelope>
  

  CBF8EF9C59F8A6C84EB31C68F0903399

  Replace fFolderGUID by fParentGUID

• I have FF8.0.1 and adobe 11 still Flash Player crashes again and again

  I have adobe flash player 11.55 and firefox 8.0.1 that both are up to date but when I try to veiw video flash player continues to crash over and repeatedly tried to reinstall FF8 and reinstall flashplayer yet always does the same thing

  He never gave me any id crash but so bad, I had to uninstall and reinstall FF8 and Flash Player to run (never had any problems with FF5 - 7, what happened?) 8 seems to have some problems

• Computer crashes constantly and now videos take forever to load and play.

  When I look at where they come from, my computer hangs like a madman and half the time, I just videos, case is not giving up the video.  My computer freezes constantly, and yet everything is updated and functioning.  I could be reading a news article and all of a sudden the whole system goes black and white and then after about 30 seconds the computer turns off.  I cleaned it with canned air and everything recommended.  Can I go back to Windows 8 and abandon 8.1?  I need assistance with these issues and in other words please.  Why this keep happening?  What are the viable alternatives are there for all these problems?  Nothing started happening until my computer updated automatically with 8.1 and now has been a year of nightmares constantly.  Help, please.

  Helpless and needs fixing

  I'm no expert, but I think that there is a problem with the Windows updates for 8.1 and HP desktop computers, dragged my mouse, its has been staticy with snoring and crackling and video would freeze intermittently. What finally fixed my machine was a complete restoration and blocking the windows updates. Now my machine is perfect except for the fact that the heartbeat sounds terrible. The beats are working fine now, they sound just terrible.

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.