Post-mortem debugging - dumper utility

Similar Questions

• Cannot get rid of "debug dump files.

  When I 'disk cleanup' results show a list of files to delete and "debug dump files" is unchecked. I then check the debug dump files, but when files are deleted, the debug dump files do not disappear.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Save files, previously called crash dumps, allows you to save the information on the program for debugging later. Dump files can be especially useful when you are testing a program on a computer that does not have source files or a symbol. When an incident occurs, you can save a dump file and later, debug on the build computer or on another computer on which the source files and debugging symbols.

  Try these steps and check:

  Step 1:

  Run the disk cleanup utility should delete these files. You can remove the files if you want to save space on the hard disk.

  Try to delete the files as an administrator. To do this, try the following steps.
  a. Click Start, type disk cleanup, click with the right button on disk cleanup and click Run as administrator.
  b. place a checkmark on "System error memory dump files"
  c. click ok and check if the files are deleted successfully.

  See , delete files using disk cleanup

  Step 2:

  Try to remove the dump files manually and check:

  To do this, follow these steps:

  a. Click Start, type or copy the following command in the start search box and click on enter.

  %SystemRoot%\Minidump

  b. press on ctrl + a to select all files in the minidump and do right click and select Remove, or hit delete key on the keyboard.

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• Cleaning disc does not remove "debug dump and system error memory dump files".

  Original title: clean windows vista disk

  on my drive clean I have 112 mb on the debug dump files and 112 mb on system error memory dump files. My problem is when I try to delete these files from my cleaning disc will not remove these files. could help me with this problem?

  Hello

  1. what happens when you try to delete the files of debugging bump?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start in safe mode and then try to perform a disk cleanup and check if it works.

  Step 1: Start Windows Vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Delete files using Disk Cleanup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Also check the event viewer on the program that is causing the problem.

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Hope the information is useful.

• What is a debug dump file, and do I need?

  When I go to disk cleanup, debugging dump files is one of the options, are files created by windows, will be permanently deleted and do I need?

  Hello

  Those are to help if you are experiencing operating system problems. If there is no
  real problems under Windows and then delete as they will not help in the future
  News and events will be created if a major problem comes up.

  I hope this helps.

• Delete or not; "System error Memory Dump Files" & "Debug dump files" in the Windows 7 disk cleanup program

  I am new to Windows 7, 64-bit OS and making the disk cleanup program. There are 2 unfamiliar topics with boxes to check what are the "Debug Dump Files" and "system error memory dump files.  I'm naïve as to what are these files and whether they contain all files that possibly should not be deleted.  Can anyone say and find out about what are the debug files and system error Memory Dump and if; Should I or not the check their boxes to get rid of all these files in particular type box?  Or could there be some Debug files & system error Memory Dump that might be of some importance and should not be deleted?

  Thank you for your time and any comments on this would be greatly appreciated.  Have a nice weekend.

  Tom R

  One good thing about Windows Disk Clean up is, only offer files delete them it is safe and will not harm your PC. Files of system errors and debugging dump files are created when there is an error in your system, and it creates a dump file that could be used for analyses. That say if you encounter blue screen error, dump file will create and if you find analysis you of cause of this problem. Whether or not you want to remove, you, some people will delete it only while others will keep the Explorer themselves later. But more importantly, it is wise to report them to Microsoft before deleting.

  To do this, open Control Panel and click under Maintenance contract and Action Center, click Check for solutions then it will collect all the information related to the errors and dump files and he could ask permission to send them and if you great permission, they will be sent. Once it was successful you can delete them.

  Sending the Microsoft dump files is a good idea, because there are teams who revisit and they try to find the cause and resolve it through Windows Update, or inform you about the possible solution in the center of the Action.

• Help with a post-mortem

  Hoping to find an overview here.

  I'm new with a small company and an implementation of ESX 2 small vsphere 4.1. I have a background with a significantly bigger vSphere environment.  Yesterday, I made a change to the network configuration from one of the ESX servers that finally overthrew the virtual environment for a period.  I do not understand why it happened, but I would like to offer the facts and see if someone can see what I missed (in addition to first place the ESX Server in maintenance mode).

  The network configuration:

  vSwitch0 is associated with pnic0 and 1.

  Contains groups of ports for network virtual computer and Console of Service.

  No VLAN, is on the 10.1.0.0/24 network.

  vSwitch1 is associated with pnic2 and 3.

  Contains groups of ports for ISCSI1 and ISCSI2.

  No VLAN, is on the 10.1.3.0/16 network.

  vSwitch2 is associated with pnic4.

  Contains a group of ports for vMotion.

  No VLAN, is on the network 10.1.3.0/24.

  SAN is an array of iSCSI Dell Equalogic.  The software initiator is used.

  Changes I made:

  First of all, I noticed on the links of iSCSI subnet mask and changed to 24 believing he was wrong.

  Then, I wanted to add a service on the network of 10.1.3.0/24 console to ensure a certain level of redundancy.  No particular reason, I chose to add a service on vSwitch2 console.  As soon as I did, on the ESX Server guests seem to lose connectivity to the San.  In other words, they seem to be running, would respond to pings, but were inadmissible for something more.  I also lost connectivity to vCenter (which was allowed) and could not use the VI Client to connect directly to the affected ESX host.

  To recover, I had to turn off the ESX host to initiate an HA event to bring guests.  To restart, I was able to delete the new console ESX service console, and then put the ESX Server online.

  After the restoration of connectivity, I attempted a subset of customers back to balance the load of vMotion, but discovered vMotion would timeout.  I don't know if vMotion has already worked in this environment or not.  After investigation, I discovered the pnic4 cable (used for vMotion and my extra service console) was just a crossover cable from one ESX Server to another.  I replaced the crossover with some cables through the SAN switch.  vMotion has always failed.  I changed the IP addresses of vMotion network 10.1.4.0/24, vMotion started working successfully.  I figured then that is the reason for the 16 mask which was originally on the iSCSI ports.

  I think it's all that relevant.  Again, I'd be recognizing any idea and will certainly provide further information as requested.

  Hi Matt,

  Welcome to the forums.

  You must use different subnets for separate networks. Otherwise if for example your ESX must contact with the IP 10.1.3.64 iSCSI storage, how would it decide vmkernel port to use: one on vSwitch1 or vSwitch2?

  When you have changed your ESX configuration perhaps at some point the host has chosen to use the wrong way and lost its connection to the storage.

  It will be useful.

  Concerning

  Franck

• DirectInput8Create() crashes

  Hello

  I have a 32 bit console program that listens to the external USB (sensoriumembedded.com) triggers. To listen to, I initiate a direct entry with DirectInput8Create(). It works very well under the debugger of Visual Studio 2012. However, when the debug version of the program is run without VS2012, it crashes. Call the post-mortem debugging, I find that the accident occurs at DirectInput8Create(), try to read some remote location (such as 0x6AE4FF18), where should not be something.

  Did anyone experience this behavior? Any tips?

  Much appreciated,

  Yuri

  Hi Yuri,

  Thanks for posting your question on the Microsoft community.

  This question fits better to the developers on MSDN forums.

  I suggest you post your question on the MSDN forums for assistance by other developers.

  MSDN forum
  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=vcgeneral

  Thank you

• Files dump debugging and log files to install in the disk cleanup window

  The two points above appear in my disk cleanup window, and I wonder if it is o: k to remove. The first occupies a space of 283 KB and the other 2537 KB. The description of these two files in the disk cleanup window is "files created by Windows.

  I have a second question: I have about 5 GB left as free space on my hard drive of 'C '. If this is considered sufficient, or should I get more? I am a senior retired and only use the computer for basic items.

  I have a computer Dell Dimension 4100 with Service Pack 3 for Windows XP - Home Edition Operating System - desktop, 111 Pentium with 930 MHZ, 20 GB hard drive and 512 MB RAM. The file system is FAT 32.

  Thank you very much for your cooperation and your response.

  "Debug dump files" are copies of the contents of your computer's memory.

  When a program crashes, it will sometimes "dump" all or part of the
  contents of the RAM to a file on your hard drive. The file is useful to
  a technical support person who tries to understand why the program
  crashed. (Most of the tech support people have no idea what to do with a dump
  file.)

  Unless you have been asked to submit a dump for inspection file, feel free
  to get rid of them.

  Setup logs files are "log" installation of a program. If you
  Watch a (they are really just text files - open with Notepad) you will have
  see that they give a blow by blow description of how the program has been
  installed, glorious detail.

  If a program does not properly settled, the Setup log will tell you what that
  was wrong. If you have not had a facility wrong, do not hesitate to ditch
  These files as well.

  On the question of how much free space on the disk is enough... There is no
  standards. 15% of your drive must be empty in order for Windows
  The Defragmenter built into the work. In addition, it is to you.
   
  Your processor is another story. It's not easy to find effective security
  software that will work on a P3. Even if you only use the computer
  for the basic elements, an internet connection is pretty basic for a online
  criminal to find you.

  Another response of the community of Windows XP newsgroups

• Authentication http post VI errors

  I am trying to query a web service to third parties non-LabVIEW LabVIEW 2014, using HTTP POST. Using another utility (restclient-ui-3.5-jar-with-dependencies.jar), I checked that URL, user name, password, and query syntax are accurate and are running on the same computer where my VI fails. I must be missing something when translating that to LV, because I get the error 401 (full authentication is required) and also 415 (unsupported media type).

  I have attached the configuration file used for the other utility, my VI and an overview of the response from the Web service for the post of the VI.  I had to make all anonymous, hide url, user, etc., so it can not really be tested as it is, unfortunately. I tried with & without additional authentication header, with & without Config SSL, etc. You can see the different options on the VI.

  Any suggestions?

  Thank you very much.

  Solved my problem with a combination of different required headers and syntax fixes.

• EOS Utility just is not working with Windows 7

  I read a lot of posts on the EOS Utility. Obviously there is a problem with this work with Windows 7. Many many people have the same problem. It worked fine with Windows XP.

  Canon, please take note and please fix this problem.

  I read the posts and tried ALL the patches. None have worked so far.

  So what is my problem.

  I connect my 7 d to my PC and open the EOS Utility. It starts to download my images then WIndows 7 download utility opens as well. I select 'Start downloading images' in the u of EOS. The EOS Utility and then disconnects / fails.

  I downloaded and installed the latest drivers, software etc.

  There is there a problem with the software of Canon, but unfortunately I don't see Canon not do anything to fix it.

  Canon. I can pleeeeeeese have a fix from you.

  Great!  But I will tell you is that you've got things to work.

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Z30 "Does not match debug symbols" 10.3.2.2226

  Updated my device today at 10.3.2.2226, now Momentics shows "cannot find corresponding to debugging symbols.

  they should not be available for the OS version now?

  Thank you

  We are a little behind those posting the debugging symbols.  You can work around this problem for now by the Momentics window menu, choose Preferences, the BlackBerry, the targets and check "allow the debugging and profiling with symbols do not match.  This will allow debugging of code source within your projects, but will be missing information about the classes included in the libraries of the device.

• Connect to the router VPN using PPTP (Ubuntu)

  Hello

  As I mentioned in other post, I try to get the VPN works for my Ubuntu workstation. I'm not an expert of VPN, so I need help.

  So far, people seem to agree that pptp is easier to config that IPSec (under Linux platform). Select the PPTP Protocol and add a user account for the Linksys router.

  Now, the Linux part.

  I have pptp-linux installation (it is the best client for linux pptp seams). I try to set it up, but I missed something relatd to coding or something.

  I try to follow this documentation: https://help.ubuntu.com/community/VPNClient#PPTP

  When I run this command: pon myvpn nodetach

  I get the following error:

  Using interface ppp0
  Connect: ppp0 <-->/dev/pts/2
  MPPE required, but not executed [v2] MS-CHAP authentication.
  Connection down.

  Here is the log of the router:

  15 Oct 21:51:02 2008 Client Remote System Log [] disconnect PPTP server.

  Kind regards

  Hello

  Thanks for your help and this useful link.

  I have change my configuration file and I managed to set up the pptp connection.

  Here the configuration file that I use (for people with the same problem):

  RemoteName until-vpn
  LinkName until-vpn
  ipparam entmd-vpn
  Pty "pptp exemple.dyndns.org - nolaunchpppd.
  name budderball
  usepeerdns
  require mppe
  garbage-eap
  /noauth
  file /etc/ppp/options.pptp

  Also, I change the contents of/etc/ppp/chap-secrets:

  Budderball until vpn-based *.

  With this configuration, I can launch the tunnel and communicate with the gateway and LAN.

  Here the command line I use to establish the connection and than create road so that any request for 192.168.1.0/24 use the ppp0 interface.

  sudo pon entmd-cpn debug dump logfd 2 nodetach

  sudo route add - net 192.168.1.0 netmask 255.255.255.0 dev ppp0

  Finally, by reading the documentation, I found a plugin for Network Manager. It's a work like a charm.

  For ubuntu: sudo apt - get install network-manager-pptp

  An installation, you must restart to 'activate' the plugin. (this is a bug)

  You can use the network - manager to configure your pptp connection. I intend to post a wikiw on the Ubuntu Wiki page.

• Can I delete these files with disk cleanup?

  Original title: "disk cleanup windows 7 '

  I did a disk cleanup in windows 7, gives the option of removing the debug dump files, 331 MB can I delete this? also has an option of deletion by the user in the 903 MB windows error reporting queue I can remove this? I don't really know if I can delete them.
  Thank you

  Hello

  If you encounter any problem with your computer, such as bluescreens and unexpected restarts you
  must delete them at any time.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  You all - leave only check the minidump files if you have had serious failures.
  as bluescreens, or blocks - these contain no actual useful data unless the system has been
  strange problems.

  Good 3rd party free utilities to help:

  CCleaner - free
  http://www.CCleaner.com/

  Forums for CCleaner
  http://Forum.Piriform.com/

  Wise Disk Cleaner - free
  http://free-disk-cleaner.WiseCleaner.com/disk-cleaner.htm

  ===========================================================

  These utilities can read the Minidump and another error collection files if you need to see what
  in them there.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What is referred to in the documentation of 11 GR 2 .rpt file troubleshooting section?

  Hello

  
  I'm looking through the FMW Forms Services Deployment Guide, section A.4.1 (diagnostic customer breaks down) 11 GR 2 documentation.

  It is a .rpt file but it is not clear to me where to look for it. He also said that the root of the name of the file must match the name of the executable. What executable do? Does this mean the browser, the form that was underway, the forms runtime, what exactly?

  Thank you

  I shouldn't be answering my own question, but... I found a paper troubleshooting for 9i and it does not necessarily mean that the .rpt file is actually the crash dump to the executable that is likely to be the browser (iexplore or netscape - old document).

  As we use clients windows 7 2012 windows servers, then this information, in my opinion would be really wrong.  On windows, if there is a picture of the kernel, the file is probably memory.dmp, but if it a user mode dump, then you can configure a number of tools a post mortem debugger.  I do not know the exact details, but I guess that the user can specify the name of the dump file or perhaps the name of the dump file is dependent on the tool. In any case, I don't think it will be necessesarily or probably even be a file ending with. RPT.

  This bit of oracle documentation should be updated, I think.

  Good bye.