POST SCRIPT printer printing Garbage

Similar Questions

• Post Script - static text does not print Documaker (PST) 12.1

  UPDATE *.

  We were able to solve the problem. downloadFAP has been set to no. We turned on! Thank you!

  _________________

  Hello

  During our process of Post Script Print print all sections with static text and fields. However items that have only static text does not print.

  POL files and NA show entries for the Section with (static text + field data and static text ONLY).

  Grateful if someone direct me to look at the resolution of this problem.

  Thank you.

  This is now solved.

• HP that 7520 duplex prints Garbage

  Using Windows XP on Dell Inspiron laptop and printer HP Photosmart 7520 wireless all-in-one

  Whenever I have printed two sides, first page print all others (including back of the first page) print garbage. It looks almost like a different language.

  Any help would be most appreciated!

  Hello mshack,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 7520. How is the printer connected? USB or wireless?

  Please make a copy both sides of your printer. This step will be a test to check a software issue or a hardware issue. If this copy comes out perfect, then it would look like a software problem.

  Also, please make sure you have updated the Firmware on your printer. If you are unsure please click here. Make sure you only select your appropriate operating system.

  Let me know your troubleshooting steps, and I will help you.

• HP laserjet 4100n - printing garbage after upgrade to Windows 8 and can not network

  Hi everyone - I've recently upgraded to a new PC in Windows 8 and I have terrible problems with my printer HP Laserjet 4100, which worked perfectly before XP.

  Question n ° 1

  I had to get a parallel/USB cable to connect the printer and you can see after downloading some drivers of my PC and I can print - but every now and then it prints garbage to half way through a document/print run.  Someone has experienced this problem and if so how to solve?

  2nd edition

  At the time where the printer is a stand-alone but I want this printer to network, but no matter what I try I can't be seen.  I printed the configuration information and it shows me what I need, but I when I try to add it it just can not be detected.  What I am doing wrong?

  I was able to add a Lexmark laser printer at the independent address and I've also linked it with no problems at all.

  Any advice (as simple and in English) would be greatly appreciated.

  Reset the cold of the printer. Turn the power off. Hold down the green button while turning on the printer up to cold appears in the window of the menu. Liberation and the printer will come on loan. Wait about 1 minute after a ready appears, and then print the config page again and see if the address has changed. Even if this is not the case, go to a prompt on the computer and see if you can ping the address.

• Post Script BCH files/PST file - Documaker 12.2

  Hello

  It is with regard to the fsisys, BCH files and PST file over the generation of post script files.

  We use PRTTYPE = PST for the generation of post script files and using BatchingByPageCountPerRecipINI in AFGJOB.

  < BatchingByRecip >

  Batch_Recip_Def = True; "" Client1BCH "; Customer

  Batch_Recip_Def = True; "" Client2BCH "; Customer

  < Client1BCH >

  Printer = CPRINT1

  PageRange = 1.9

  BatchBannerBeginForm =; BANNER; BANNERS; BANNER_PAGE;

  BatchBannerBeginScript = PREP

  < Client2BCH >

  Printer = CPRINT2

  PageRange = 10,99999

  BatchBannerBeginForm =; BANNER; BANNERS; BANNER_PAGE;

  BatchBannerBeginScript = PREP

  Now have 5 different recipients of Documaker, 10 lots for 1 to 9 pages and beyond.

  Issue.

  When GENPRINT is running, I can observe that all transactions are processed and are written in corresponding. BCH files. However, except for Client1BCH, script files to post for the rest of the lots have data written to them forms. When I work with these post script files, the output is as expected.

  For Client1BCH, only - everything that I get from post script files's homepage! I know that the transactions are less than 9 pages for the recipient - customer! However, I don't see any output.

  Appreciate any guidance to resolve the issue.

  Thank you.

  Finally, the problem is solved! That's what I did to debug.

  I went from the recipients for BCBATCH1, instead of BillingClient, I assigned the insurant and see than BC. PRINT1.PS file accompanied data - as expected. This made me think that this might be a little to do with the recipient - BillingClient himself. I went back to the definition file and seen as the 'Code' for BillingClient and banner - two recipients, is the same! I changed the code for banner and tested again out of the lot.  The output is as expected.

  Thanks a lot for spending time in the analysis of the problem and send me tickets!

• Usually the post-Scripts

  Hi guys,.

  I test a lot with vmware Mirage for the deployment of Windows 7.

  Actuall, I write post scripts. If I update a Base Layer "post_bi_update.bat" works really well and calls the "post_core_Update.bat".

  But if I spend an a Win7 XP system or run a provisioning BaseLayer, the message "migration.bat" does not work.

  Any ideas how I can run a post Migration... for Winxp Win7 Migration scrip and a BaseLayer provisioningScript?

  Thanks for your help.

  Concerning

  The post_migration.bat file should work for XP to 7 migration. He runs after the first reboot and after the series of 17 or more steps so that the user is locked. Can you run the file .bat manually after the migration, and it works very well then?

  For the supply of the base layer, using the post_provisioning.bat file. We need to document this better.

  Make sure that both files are a part of the reference machine, while the base layer is captured and placed in the appropriate folder.

• Using Wizard Actions to save 20,000 pdfs as post script

  Hello

  I have a problem when I try to use the wizard of Action to convert 20 k pdf for post script... I work end if I use it on a small number of documents but acrobat crashes if I try to load the entire file.
  I'm using Acrobat XI on an imac OSX yosemite.

  Is it possible to make sure Acrobat opens only a single file at a time?

  Acrobat load only one file at a time. However, it is not very effective at all when it comes to batch and tend to get stuck or crash after several files of hundreds of my experience. So either do it in batches or are looking for a more robust tool for this task.

• true-type compared to the Post script fonts

  Hello
  I need match a font of logo business card, use the navigations buttons. I found the font I want to download but I don't know the difference between a true type font and a font of post script and more specifically what is the best to use on Web sites.
  
  Any help greatly valued!
  
  Shontelle
  
  

  It does not really matter as if your using a non-standard font, you will have
  to save the text as a graphic to use on your website, otherwise it will not
  display correctly.

  While everything seems okay when you have turned it into a chart, is not
  matter if it's true type or postscript, as the behavior of each type
  will be lost.

  Gareth
  http://www.phploginsuite.co.UK/
  PHP Login Suite V2 - 34 server behaviors to build a complete system of connection.

• Script printing error

  Original title: print printer print

  I have a Samsung 1600 printer and when trying to print argument or appeal procedure not valid from 1 to Char message Script error line 2432 appears. I'm unable to find the cause of this error. All connections seem to be ok for the printer. The error occurred just recently. There's bee no power or failures that I am aware of that may have caused this.

  Your message was incorrectly displayed in the Feedback forum.  I moved it to the windows 'Hardware and drivers' forum where it is on the subject.  Quote your version of Windows when you post.

  The symptom you describe is a driver problem.  See if this helps: http://support.microsoft.com/kb/2652062

  What has changed on your PC between when it worked and now?

  Visit the website of Samsung and see if they have a driver written for your version of Windows.

• LaserJet pro 200 color mfp: how to stop printing garbage

  Is there a way to stop the printer from printing waste?  Unfortunately, when you install a new system, the printer was sent to garbage, it would print 1 line of gibberish on each page of what appeared to be hundreds of pages.  I tried cancel documents in win7, restart the computer, turn off the printer, then press cancel.  Nothing seemed to work except by pressing the batch ' button sssssssssssssssssss cancel time.  I'll still put up new system, and fear that this may happen again.  Thanks in advance for the help.

  When you turn off the printer, all documents that are in the memory of the printer get out, however, if the printer has not sent a message to the computer that a document is finished printing it remains in the printq printers and try to print whenever the printer communicates with the computer. On the computer, you will need to go to the printer and click twice on the icon, and click then on what is the impression which will reveal the printq of all elements waiting to be printed. Just right-click on each item and cancel printing until the q is empty.

• 2032 script printing error

  I get script errors in various sites when I try to print a last when 2032 was trying to print a label for shipping through paypal.  I am running Windows 7 and have a canon mp470 printer.  I downloaded the current drivers for my printer and tried to Fix Microsoft program which did not find anything wrong.  Sometimes I can cut and paste the element I want to print a document in a Word, but I could not even to today.

  It is an Internet Explorer error, not a printer problem.  Please visit: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/ba130766-f8c4-49a7-a353-278a629e3a54

• M602: M602 direct PDF prints garbage after firmware update

  We have 18 laser printers HP in society.

  I installed an update of the firmware on three devices M602, and now all the direct PDF files print square characters mixed with the correct charaters on our documents.  PDF files have embedded fonts.

  The version of the firmware in the M602 is 2307851_000040 / 3.7.01 / 20160225

  The same document printed to a P3010 prints correctly, with firmware 07.240.7 / 20151017

  I would like to start working with HP for a fix of the M602 firmware.

  Here's a small segment of the document print correctly before the update of the firmware:

  

  After working hard through the chain of command, I have this escalation with HP and has recently received the new firmware that corrects this problem for one of our many printers with the problem.  This is excellent news.  Thanks HP!

• Jet Office HP 8600: post cards printing

  I CAN'T PRINT ON POSTCARDS.  I CAN PRINT ON EVERYTHING ELSE, BUT I can't GET THE POSTCARD to PRINT CORRECTLY

  SUCCESS! I'VE BEEN TRYING TO PRINT POSTCARDS FOR AS LONG I'VE HAD THIS PRINTER.

  FINALLY I CAN DO.

  THANKS AGAIN

• What is the best way to copy a large poster and print it?

  I am doing a project of great art (about 5 feet by 5 ft), where I'm going to learn things by hand and would like to make a copy of this project by analysing the it in the computer, or to take pictures high resolution project and their compilation together in the computer and then print the image at this size, or larger. So, I'll have the original, 5x5ft and one printed copy.

  What is the best way to achieve this?

  I heard that vector images are ideal for this, so is recommended for Illustrator this?

  I know it is a vector graphics program, but is it possible that I can take a bitmap of a scan or photo and somehow become a vector? If this is not possible, what are the recommendations would you?

  I have Illustrator CS2.

  I do not believe that the scanners large format are flat, if I'm wrong. In my view, they have a mobile head that scans the original bottle then made up the data with the software.

  It is not cheap, if the original can be easily damage they'll probably damage it unless you make sure that beforehand what they know about it
  and that they accept that they can scan without damaging it.

  Photography is a good solution if you know how the art of light and you use a long distance goal.

  The reason is shooting with a normal or wide-angle will give an effect of stretching the edges especially bandwidth due to the proximity of the camera to subject distance. The lens and the longer distance will accomplish the same capture without you stretching effect.

  Now, if you really have a service experience work fine arts or large commercial then scanning might be the way of.

  In both cases, I don't think you want to vectorize the art.

• Post in print, using the burst control file

  Hi all
  
  We use the break control file to print and send. Email option works very well. But when it comes to printing, printing "PDF file not printed. 128 MB of memory is necessary to allow a direct PDF printing"in printing.
  
  We use CUPS and this is the way that we use for printing.
  
  IPP://localhost:631/printers/YG_MAIN
  
  When we try to run the same program manually, giving the name of the printer and the number of copies at 1, then we are able to see the pdf output. Other reports are normal bi publisher also works well, w.r.t. this printer. We face this problem when we run xml program, with the option of printing bursting.
  
  Suggestions please...
  
  ---------------------------------------------------------------
  Here's the full breakdown control file,
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xapi:requestset xmlns:xapi = "http://xmlns.oracle.com/oxp/xapi" >
  < xapi:globalData location = 'stream' >
  < / xapi:globalData >
  < select xapi:request = ' / XX_IMB/LIST_G_PAT/G_PAT ">
  < xapi:delivery >
  < xapi:email id = "123" server = "XXXXXX.com" port = "25" from = "[email protected]" > "
  < xapi:message id = "123" to attachment = "${DESTINATION}" = "true" content-type = "text/html" subject = "Test email" > please find the attachment < / xapi:message >
  < / xapi:email >
  < xapi:print id = "print1" printer = copies "ipp://localhost:631 / printers / ${DESTINATION}" = "1" / >
  < / xapi:delivery >
  < xapi:document - output type = 'pdf' flow '123' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Email"]" > "
  < / xapi:template >
  < / xapi:document >
  < xapi:document - output type = 'pdf' flow 'print1' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Print"]" > "
  < / xapi:template >
  < / xapi:document >
  < / xapi:request >
  < / xapi:requestset >

  BI Publisher burst of CUPS printer uses no PASTA, out don't is converted from PDF to Postscript, it does when it is executed via simultaneous Manager.
  You can put an entry in the next $XDO_TOP/resource/xdodelivery.cfg (replace with your printer):
  

  
  
  
  
  ipp://mycupsserver.mydomain:631/printers/MYPRINTER
  
  /usr/local/bin/pdf2ps -paper A4 {infile} {outfile}
  
  
  
  

  Kind regards
  Gareth