Posture of the ISE - check a specific MS KB

Similar Questions

• Check the ISE for the VPN Cisco posture

  Hello community,

  first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

  Thank you!

  The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

  The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

• How to activate the spell checker on a specific site?

  I disable by spelling error on site and now I can't enable it, because he can't find the settings for that he
  Please tell me how I can enable it back
  the site is a forum

  The current versions of Firefox hide spelling in the context of a text box menu if the web page disables the spell checking via a spellcheck = "false" attribute of this element.

  You can click right in the area of the text editor and use "Inspect element" to see if this text box has a spell checker attribute = "false".
  
  Remove this spellcheck = "false" attribute by selecting it via double click and using the BACKSPACE or DELETE key should reappear the item check spelling from the context menu.

  • [971758/questions/971758] Where is the option to spell check in Firefox 24.0

• 1.3 of the ISE and NAC

  I have a client that 5508 WLCs runs through the area, and I'm catching IEEE802.1x authentication for the enterprise WLAN and WebAuth for WLAN of comments... they PSK now :(

  They have ad and ISE and NAC great interest, so my immediate thoughts are to integrate ISE AD and use ISE as RADIUS server for .1x on the WLC. Then use the WLC and ISE do WebAuth for comments... It's all of the standard stuff, but it gives the background.

  Now, we come to the interesting bit... they want to run BYOD. They are involved in the financial markets, so the BYOD must be tightly controlled. They ask on ISE coupled with the NAC, but I am not convinced that I need the NAC since the arrival of the ISE1.3. Of course, I will examine three (min) SSID, corporate knowledge, comments and BYOD, just logically distinct. I have nothing that ISE 1.2 cannot press the company and comments but BYOD must full profiling and reclamation prohibition or device before access to the net.

  Someone at - he comments or suggestions? Is ISE 1.3 enough NAC-like that I don't need more, or if this is not the case, what additional benefits does that ISE can support

  Thanks for your advice/comments/experiences

  Jim

  Hi Jim -.

  Version 1.3 offers an integrated PKI and a significantly improved services reviews experience. The internal PKI is nice if the customer does not have a PKI solution in place. Don't forget however that the PKI ISE internal can only issue certificates to BYOD devices which have boarded through the ISE BYOD "flow", you cannot use the ISE PKI to issue certificates to computers in the domain.

  With regard to the NAC: you need to specify exactly what is needed here. If you were to make "posture assessment" then ISE can do for machines based on Windows and OSX. You can check for things like: A / V, a/s, status of the firewall, Windows hotfixes. If you want to make the posture on mobile devices, so you will need to integrate ISE with MDM (mobile device management) solution such as: Airwatch, Mobile, Extend360 iron, etc. ISE may question the MDM for things like: the device is protected with a PIN, is the rooted device, is the encrypted device, etc.

  I hope this helps!

  Thank you for evaluating useful messages!

• 1.2 of the ISE and iPEP required certificates

  Hello

  For version 1.1.x of ISE, there are a few constraints on the certificates used for iPEP and Admin:

  Both EKU attributes must be disabled, if the two attributes, EKU are disabled in the certificate of Inline Posture, or the two attributes, EKU must be activated, if the server attribute is enabled in the certificate Postur Inline.

  • [http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bea904.shtml]
  • The same applies for iPEP ISE 1.2? For ISE 1.2 User Guide and Setup Guide material does not mention anything about EKU and the attributes of specific certificate...
  • Any thoughts?
  • Thank you
  • Octavian

  Validation of EKU has been removed in version 1.2

  "If you configure ISE for services like Inline Policy Enforcement Point (iPEP), the model used to generate the ISE server identity certificate must contain attributes to authenticate client and server if you use ISE Version 1.1.x or earlier." This allows the admin and inline nodes to mutually authenticate each other. The validation of the EKU for iPEP was removed in ISE Version 1.2, which makes this less relevant requirement. »

  Source:

  http://www.Cisco.com/en/us/products/ps11640/products_tech_note09186a0080bff108.shtml

• COA and Clarification of the ISE

  Can someone clarify exactly what COA (change permission) is?

  From my understanding, ISE can make an initial authentication and using the configured authorization policy but it is not considered COSTS.

  If subsequently a posture or profiling check is performed for this authenticated, authorized session and a new policy applies to this existing session then this would be considered in COST.

  This is why COA is feasible with advanced license because of the posture and profiling.

  Thank you very much.

  Graham

  Hello

  CoA is a feature that allows two-way communication in the radius Protocol. Before the scenario you had when the clients connect to the network, the n intiates a radius authentication session, and then you have received either an accept or reject.

  With this agreement, after you receive reject it or accept. You can now put an end to an existing session, authenticate a user if their session information change and correspond to a different access policy (must as in the example if a customer makes inconsistent to consistent).

  CoA, which is not entirely used for the advanced features of license. There are a few scenarios where cost can be committed, for example, if an administrator removes any end point of the database of the ISE. ISE will then interview the internal session cache to see if there is an active session and then will issue a certificate of authenticity.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  1. put the image files you want in the slide show in an album and genre as you want. Follow the Apple document to prepare images for iDVD: iDVD ' 09 (7.x): preparing images for iDVD slideshows

  2 - Launch iDVD and select an older theme, not animated.  You can change the background of the theme by dragging the image file of your choice, black or other, in the display pane for the menu.

  3 - Click on the button '+' and add a slideshow from the menu.

  

  4. double click on the sideshow button to enter the mode of construction of the slide show.

  5. in the media pane click the Photos button.

  6 - click on iPhoto and find the album you created with selected images.

  

  7. Select all images in the album and drag to the left in the slide show window.

  8 - Select the transition for the slideshow and the time for each slide on screen

  9 - follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

  FAILED: attempt recovery of bad sectors (disk hard C)

  I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com.

  I could access the program successfully on my home screen (Windows XP Edition family version 5.1 service pack 3.0).  Phase 1 of the scan completed successfully, but about 70% through the phase 2, the analysis stopped and I got this message: "the disk check utility requires exclusive access to some Windows files on the disk.  These are accessible only by re-starting Windows. "   I was in charge of restarting my computer and repeat the test.  I did this, but got the same message several times in a row.

  I use the MS Update center regularly, my Windows XP software has been certified 3 times as being Windows genuine, and I update MS Security Essentials at least every 2 days.  I DON'T KNOW WHAT ELSE TO TRY!  As a general rule, ALL my other Windows functions work correctly & completely of my home screen.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Please contact me at * address email is removed from the privacy * with specific instructions.  I'll try the center of update every day, where you will find all items that can be downloaded to fix this thank you for your continued support.  Joy Knobloch

  UPDATE WE CHECK DISK: 2 responses of PML & TWELCH were marked as possible answers.  After you schedule a check disk and shut down your computer, you must WAIT an hour or two before starting.  There is perhaps a long line of users waiting to get their audited records!  I finally managed to get the disk to run check (I also checked the box that says automatically correct errors).  BUT I NEVER GOT A CONFIRMATION MESSAGE THAT DIRECTLY STATED THAT ANY "BAD SECTORS" HAD BEEN RE-COVERED.

  LAST QUESTION: Can we assume that if the disk check ran completely and automatically corrected "problems", that the "DEFECTIVE SECTORS" have been found?

  Thanks to everyone who participated in this forum.  E-mail address is removed from the privacy *.

  It is not clear what you were / are doing.  Try this:

  Start > run > chkdsk /f > OK

  A box appears with the following message:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by
  process.  You want to schedule this volume t
  check the next time the system restarts? (Y/N)

  Type Y and press ENTER.  Then, restart the computer.

  If, during the process that follows, you still receive the message "FAILED: attempt recovery of bad sectors (disk hard C)" or something similar, go to the website of the manufacturer of your drive hard drive and download the appropriate for your hard drive diagnostic tool.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Unless you allowed to access remotely in accordance with a phone call to the support of MicrosoftTHAT YOU HAVE MOMENTUM, you must disable the remote access and Remote Desktop (right click on post work, select Properties, click on the 'Remote' tab).  In fact, you must disable these features now and only reactivate if still initiate you a phone call to technical support Microsoft and will need to enable them.

• Cannot access the ISE-3395-K9 CISCO Web GUI

  Hello

  I can't access the ISE-3395-K9 web gui interface concert 0 with ip address is 192.168.1.10.  I put the ip address of my labtop to 192.168.1.20 and could ping back but am still not able to access them through a direct connection between my labtop to concert interface 0 using one of the supported web browsers.  Any help would be greatly appreciated.

  It is possible that the GUI was configured to restrict access to only certain IPs / subnets. If 192.168.1.x isn't one of them, then you will have access.

  Are you able to connect to the shell via SSH? If so, you should check and confirm that all associated ISE services run by running the following command:

  show the application status ise

  Thank you for evaluating useful messages!

• CLI admin for nodes of the ise

  How CLI admins can be created for node ISE cisco?

  Is not documented, but do not see there is a limit. However you can point the admin access to AD now in the latest version of the ise. You can map ad groups to a specific role within the configuration preset of the ISE.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Where is the spell checker?

  I wonder where is the spell checker and how that I activate all products CC.  Thank you!

  Please check the following help documents.

  • Illustrator help | Spelling and language dictionaries
  • Using Dreamweaver | Spell-check a web page
  • Using InDesign | Checking spelling and language dictionaries

  Please let us know if you are looking to check spelling in any specific application.

• In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  Exactly, it would depend on how you have set the referencing of your site, please check the suggestions made in this tutorial:

  https://helpx.Adobe.com/Muse/how-to/sitemap-XML-file-explained.html

  In addition, you can check these:

  http://musewidgets.com/collections/all/SEO

  Thank you

  Sanjit

• I have cs5 and it was working fine and now he keeps asking the serial number even after that I put it and gives it the green check mark then it goes straight to that now

  I have cs5 and it worked very well and now he keeps asking serial number, even though I put it and gives the green check mark then it goes straight to that now or it just goes to the license agreement and when I accept it is going t - he once again.  I have uninstalled completely and then reinstalled several times and still the same thing.

  Csingleton11,

  WIN8 is not listed as an operating system that can run CS5 (see technical specifications); However, some users were able to run it in compatibility mode with success. See this link if you want to give that a try: CS5 installation on Windows 8

  Guinot

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• How are the objects of a specific type in a vector? Source of Java 1.3.

  How to count the objects of a specific type in a vector?

  isInstance can allow too much for your needs because it allows any object which can be cataloged to 'type', while you seem to be limited to objects that are exactly the type 'type '. In this case, you could do this:

  for (Enumeration e = attachmentTypes.elements(); e.hasMoreElements();)
    Object check = e.nextElement();
  
    if (check.getClass().equals(type)) {
      counter++;
    }
  }
  

  The isInstance() method Javadoc:

  http://docs.Oracle.com/javase/1.4.2/docs/API/Java/lang/class.html#isInstance%28Java.lang.object%29

  (Create a link to the old Javadoc you gave mentioned Java 1.3 compatible source)