Power Director 10 OEM software

Similar Questions

• Power Director 12 - Bundled - unable to Re install

  I had to reset my settings original windows computer and it has not installed the oem software to Director 12... where can I find this because it is not appearing on my computer here on the site?

  When you reset the original windows files, or in my case a upgrade to Windows 10 8.1, the media files on the computers are under a different OS as 8.1 instead of Windows 10.  I had to search my system as if it had always 8.1 to find my media files.  For some, this perhaps is the reason why it does not appear as a preinstalled software.  Good hunting!

• event of OEM software filling in the Journal of the material on a poweredge R610 Server

  Hello everyone.

  I had a power advantage windows server R610 2012 R2 Standard with a trail of material that gets filled with entries 'event of oem software '.

  I am fairly new to dell servers troubleshooting, then, how should I proceed?

  I need to activate an option of debugging get the significance of this story, or use an analysis tool that tells me that the sense.

  I mean some events are fill the esm log and I need to know which events are those (even they are information) or may disable the option to connect to them.

  Thank you very much.

  Concerning

  Hello.

  The link below will provide more detailed information about the Scriptures SALT and as well as OEM event entries.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/bmc-SEL-log

  When the SALT inputs are full, it becomes necessary to erase iDRAC and OpenManage Server Administrator.

• Unable to capture HD video using Windows Movie Maker or Cyberlink Power Director of Canon HV30 on I.Link (firewire)

  Canon HV30 HDV Capture Issues Firewire in Win 7 (64-bit)

  There seems to be a problem with Windows 7 (64 bit) in the HD video capture from a Canon HV30 on I.Link (firewire). The camera is detectable, but I am unable to capture videos HD using Windows Movie Maker or Cyberlink Power Director. All the drivers and the software updated.

  Same camera, same editing works very well under Win XP.

  Someone at - he a workarouonds?

  (1) the question arose on January 20, 2010, when I got my new computer (Dell XPS 9000) WIN 7 (64-bit) and I first tried to capture video, I had already shot with the Canon Vixia HV - 30.

  (2) the updated capture in place according to the manual of Canon, using the firewire interface to download video using Power Director 7 or Windows Movie Maker.

  -Power Director 7 is able to detect and control the camera, however once the capture begins an error message appears saying that the i-link on the camera mode is not compatible with the Strip to be captured. Verified media is HDV (60i) and playback camera settings are all correct.

  -Windows Moview Maker is able to detect and control the camera, however, no video is captured and no error message appears.

  (3) will try to reinstall the drivers for the HV30.

  Kind regards

  Blarney

• Video capture and editing using Cyberlink Power Director 13

  I use Windows 8 and Cyberlink Power Director editing software 13. I'm having difficulties to capture and edit home videos. These videos have been transferred from VHS to DVD (something that I did in the neck and was able to edit the videos to make them better) but now with my new Setup, when I receive the DVD in my computer to capture and then try to edit it, I get a message that among other things readings : "Unsupported video format". Before, I used Windows XP and Nero Vision and never had a problem of capture or change from a House on a CD or a camcorder DVD.

  Help, please. This problem may be related to missing codecs, but how can I solve the problem?

  Constantino

  Hi Constantino,

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  You can pass by the Codecs: frequently asked questions, this should help your query. If that does not answer your query. I suggest you to contact Cyberlink.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• 750 HP envy: can I use Cyberlink Power Director to transfer a VHS to dvd? Thank you.

  Can I use Cyberlink Power Director to transfer vhs to dvd? Thank you very much.

  Hello

  No, unless your computer has a capture card. I used the following device:

  http://www.TopTenReviews.com/computers/peripherals/best-VHS-to-DVD-converters/Diamond-video-capture-review/

  Kind regards.

• has had to do a reset of the W10, lost all OEM software

  Reset which resulted in losing all OEM software provided with the laptop, I was wondering if there is somewhere that software and programs can be recovered.  Aspire E 17 ES - 771 g-52PR

  Lost all the Cyberlink software, as well as all utility provided Acer.

  I know that you are not wanting to go back to Windows 8. 1 - the information I provided is only for the Applications (ie the OEM software) & drivers (which may be missing after the upgrade).

  The FIPS AppDrv disk is your own back up of these applications you can do when you purchased your PC.

  The eRecovery media will contain your full operating system (IE Windows 8.1).

  Hope this helps

• Windows 7 Pro OEM software on a new system of charging

  In an effort to fix my computer, I recently bought and installed 7 Pro OEM software. All went well for about 2 weeks and then the motherboard failed. I built a new computer and want to install the software OEM Pro 7 on it. Will Microsoft be enable / allow it makes me? Who should I contact?

  Well Microsoft's policy is that an OEM license is tied to the first motherboard on which it is installed. You can try to install it and then reactivate over the telephone, some guests had the chance to get reactivated:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Error, "Cyberlink Power Director can operate only under 1024 x 768 resolution (16-bit) colors or higher"

  Original title: cyberlink power Director does not work on windows 7
  so I'm launching cyberlink power Director and after I installed it, I get the error message that says: "power director can work only under 1024 x 768 resolution (16-bit) colors or more. What can be the problem?

  Hey swansea-,.

  What is the number and the model of your graphics card?

  Because your computer is Windows 7 installed, it wil have the latest DirectX version i.e DirectX 11 is installed by default. Here are two things, try.

   

  Step 1: Increase the screen resolution

  If the current driver supports the resolution higher than 1024 x 768, try it.

  Details here:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

   

   

  Step 2: Update the graphic card drivers

  If the resolution of the screen cannot be set high, it might be due to the limitation of the driver. This option on the rule, install the latest driver.

  You can do one of these:

  ·        Visit the website of the manufacturer of the computer if the unit is shipped with the computer.

  ·        Visit the website of the manufacturer of the device if the device has been installed after you purchased your computer.

  ·        Visit the website of the device manufacturer if the device was preinstalled on your computer and the computer manufacturer does not have an updated driver.

  For updates of the driver, see this link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more investigations, please post the required information.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 OEM Software

  I plan to buy enough computer parts to build a computer. I'm not a commercial Builder, I am a Home Builder. I will be able to use the Windows 7 OEM software without getting into trouble? I don't don't want to spend hundreds on computer parts and stuck without being able to install an operating system.

  Although strictly speaking OEM must only be delivered system integrators, it is readily available. Why is a moot point, but as noted at various points in the creation of Microsoft privacy no details are collected to identify the user. As is the case there is no way to distinguish yourself as a user of any other owner of a computer of a small System Builder using simple OEM packs.

• Not compatible Cyberlink Power Director

  Hello. I have Windows 7, 64-bit, web browser Google Chrome, McAfee security suite, Nvidia GeForce GT220 graphics.

  I use Windows Movie maker / DVD maker, edit and burn video clips on a DVD-R discs on this pc. The video is copied on the hard drive of the pc of my camcorder Panasonic SC-V700 and the AVCHD format is. However, when the video of this source is burned to a disc, it is also good, being no more washed out than the result I get to use Cyberlink Power Director 9 of luxury, which can also be used for editing.
  My problem is that the process of engraving with Power Director works almost always bad in one or the other. Sometimes I click "burn" and then click "start burn" in the window that appears and either nothing happens or it says on the screen that the program is not responding.
  At other times, he responds and the burning starts, but then it stops and on the screen, it says that there was an error EB130581.
  It burned successfully twice, video DVD, as I said, the best quality than with Windows DVD maker.
  I used the troubleshooter and it says that there is an incompatibility with the Cyberlink program.
  I've been to supprt from Cyberlink and fact what they asked me to, but nothing helped. NVIDIA graphics have been updated, capacity hard drive checked and found that a big and so forth.
  With the help of Cyberlink support isn't easy, and they have not solved the problem. Is there anything I can do to get the combustion process Cyberlink to work more reliably?
  Otherwise, I can improve the quality of the video burned to disc using Windows DVD maker?
  Y at - it program that people recommend DVD burning?
  Thank you for any help or advice.

  It's Cyberlink forums, one of the suggestions of the lowest possible use of burning rate.

  http://Forum.CyberLink.com/forum/posts/list/16309.page;JSESSIONID=6921730B6C7050834661652642538763

• Did anyone tried Power Director

  I had the same problem.  Lost respect for Microsoft... in any case, someone has already tried Power Director?  It seems that if we spend anywhere between t0 and $69 $ 180 to upgrade the included Power Director, many formats will be available to burn discs (is there a format that works on the players of STDS?

  During this time I have played with the Director of photography is pretty cool, but Power Director is needed to burn a disc.  I don't know how to get an easy tutorial to learn all the features in the Photo Director

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Movie-Maker-burn-DVD-option-on-Windows-8/6ae6eab1-27b7-45a6-9ea8-b2fef15e9ca1?page=3&TM=1397673060152 >

  @Life'sGood.

  In the future, please post your answers on this topic in.  The subject is quite different from the thread you posted as soon as possible.  I have divided and merged you messages.

  These are the files that you can use with Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-file-types-FAQ

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-DVD-Maker-what-format-does-it-recognize-to/0cc677b0-8fae-4ea1-B0D2-f06724d7e08f

  Supported input formats

  Video formats: asf, avi, wmv
  Film Formats: MPEG1, mpeg, mpg, m1v, mp2
  Audio formats: mp3, wav, snd, the, aif, aifc, aiff
  Windows Media video file: asf, wm, wma, wmv

  Output formats supported

  Windows Media video file: wmv
  Windows Media Audio File: wma
  DV/AVI video file: avi

• Change the mod to avi using Power Director v7

  I was just given a HDD JVC Camcorder and power Director v7 as a gift.  I prefer to use my Adobe first 7, much better editing.  But I'm willing to use the Power of the Director to change my clips in DV - AVI.    I can go to DV. AVI so I just make individual clips or a series of clips put there time line and processed from there.  But Power Director v7 crashes whenever I try to make a video of their chronology made with audio added, titles etc.  I get no response from forum here (boy, you are so great here with your quick responses, we should give you hugs.) I expect that I cann't restore a whole video in to set first as a DV file. AVI file.  Because of the audio and titles, effects etc or just program does not work?  I like some ot their titles and stuff, I downloaded it, but I can live without it.

  I just put the mod first clips and they seem to work very well for productions, but I heard that they will be better replaced by DV - AVI.

  Maybe I should ask the question in another post... but, all my audio wma be replaced by mpeg3 or wma works very well first?

  Betty

  Betty,

  I use CyberLink PowerDirector as an interim step to other file formats. My editing is two years (don't remember the version # and the workstation is on a big Render), so it's not the last. Everything I do is import are the various files, line them up on the Timeline with other nothinig and then export to DV - AVI. I send these files on the HARD drive. I import into PrPro and do all my editing here. I have also exported from PowerDirector to cassette miniDV via firewire on my cameras and then made the first Capture, but it is often not necessary, as the export format DV - AVI does what I want.

  As for problems with PowerDirector, I had none, but only use it as a tool in the workflow. I never really tried editing with it. Additional Audio tracks, PiP, titles, etc., are made in the first.

  Don't know if that helps.

  Good luck

  Hunt

• I have a windows xp OEM SOFTWARE license key, but the drive has failed. This key will work on any XP installation disc?

  due to a major problem, I have to completely remove the operating system (under license). can I still use this key to set up windows again? I have a key to the back of my sticker only computer laptop written "SOFTWARE OEM windows xp". Can I use this key with any windows xp cd? or I have to use a specific version? can u give me the link to download the specific version?

  Thanks in advance

  You must use the recovery disks provided by the manufacturer (or the integrated recovery system) - see you manual for more details.

  The major advantage of this is that all the required drivers should be included, so that you can immediately connect to the internet and install all updates.

  Reisntalling using the sysstem of correct recovery also means that you shouldn't need to use the key on your COA stiker - as key to 'master' of the manufactuerer is integrated into the system and should not require activation.

• Can I do a clean install of Windows 8 (without the DELL OEM software)?

  Hi people,

  I just bought a DELL Inspiron 17R laptop computer which came with Windows 8. I want to install an aftermarket SSD and do a clean install of Windows 8 on the SSD without all the stuff extra DELL piles on the computer in their factory. However, the laptop does not come with any media of Windows 8. My other options (copy windows divide in the SSD or use Windows backup and restore), both result in installing Windows 8 with a lot of software DELL.

  DELL said that they do not have the installation of Windows 8 media and I need to contact Microsoft to get it. Any ideas on how I can go about this? I'm happy to pay a nominal fee for the discs, but having already an OEM of Windows 8 installation, I want to avoid going to the shops and buy a new license.

  Any ideas are much appreciated.

  Kind regards

  Chris

  Unfortunately, your only option is to create a disk backup and restore using recovery tools provided by Dell and use it to reinstall Windows 8. This is especially true because you run Windows 8, which are not available elsewhere.

  or

  SSD of cloning:

  You can clone the installation for the SSD, provided that the SSD is large enough to accommodate the installation to be cloned.

  See

  http://www.ssdfreaks.com/content/664/how-to-clone-HDD-to-SSD-with-Windows-7s-own-software or (easier) use a copy of the trial of Acronis True Image Home.

  Note that, immediately after cloning, you must stop and unplug the original installation. The disc can be reconnected once the DSS started successfully.