Power failure ntoskrnl.exe pilot State

My laptop had BSOD, here my Dump files.

Thanks for the help!

If you know him or not, you have loaded Avira and it is the reason for the accident. You also have Kaspersky and I would remove both and use MSE it their place

http://www.Avira.com/en/support-for-free-Knowledgebase-detail/kbid/88

Kaspersky is a common cause of BSOD.

I remove and replace it with Microsoft Security Essentials if you are using win 7. If you are using win 8 or higher, I would use the built-in Defender.

https://support.Kaspersky.com/common/service.aspx?El=1464

http://www.Microsoft.com/security_essentials/

Tags: Windows

Similar Questions

Power failure Windows 8 pilot State

I have recently upgraded to Windows 8 and a new system and I do experience pilot failure State breaks down. According to previous posts I may have an outdated driver that needs to be updated.

Here is a link to the minidump files he has created:

https://onedrive.live.com/redir?RESID=CA33D835F9E483A9%21132

Any suggestions?

Thank you

NAT

Hi Nat,

DRIVER_POWER_STATE_FAILURE (9f)

This bug check indicates that the driver is in an inconsistent or invalid power state.

> [16, 2] 0 1 ffffe000f7806790 00000000 00000000-00000000 pending
\Driver\usbccgp
Args: 00041100 00000001 00000001 00000002
[16, 2] e1 0 ffffe000f8808280 fffff801b0bad2d8-ffffe000f41db010 00000000 success error cancel pending
\Driver\ksthunk nt! PopRequestCompletion

Something 3rd party is causing USB related conflicts.

----------------------------------

1. remove and replace AVG with Microsoft Security Essentials to temporary troubleshooting purposes, as likely, it does not transition correctly during the upgrade and is causing conflicts:

-AVG removal http://www.Avg.com/us-en/utilities

-MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

2 if accidents continue after the above, please enable the driver verifier:

Driver Verifier:

What is the driver verifier?

Driver Verifier monitors Windows kernel-mode drivers, drivers graphics and even 3rd party drivers to detect function calls illegal or actions that could corrupt the system. Driver verifier may submit Windows drivers to a variety of constraints and testing to find the incorrect behavior.

Essentially, if there is a 3rd driver party supposed to be originally the issues at hand, enabling Driver Verifier will help us see which specific driver is causing the problem.

Before you enable Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | Select "create a Restore Point.
Windows 8/8.1 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

How to enable the driver verifier:

Start > type "auditor" without quotes > select the following options.

1. select - 'create a custom settings (for code developers).
2 select - "choose custom a complete list settings.
3 check the following boxes.
-Special pool
-Pool management
-Force IRQL control
-Detection of blockages
-Security Checks (only on Windows 7 & 8/8.1)
-DDI compliance verification (only on Windows 8/8.1)
-Cheques
4 select - "select the driver names from a list.
5 click the 'supplier '. This will cause the sorting of all drivers by the provider.
6 check EACH box that is NOT provided by Microsoft / Microsoft Corporation.
7 click Finish.
8 restart.

Important information about driver verifier:

-Perhaps the most important which I now make it clear that it was bad often, activation of the Verifier itself is not! a solution, but rather a diagnostic utility. He'll tell us if a driver is causing your problems, but even once it will not solve your problems purely and simply.

-If the Driver Verifier finds a violation, the system will search BSOD. To expand on that a bit more for those interested, more precisely what driver verifier actually does is he's looking for any driver to perform illegal function calls, causing leaks memory, etc.. When and / in this case, the corruption of the system occurs if allowed to continue. When Driver Verifier is enabled by my instructions above, it is followed all pilots 3rd part (as we have defined it this way) and when he catches a pilot tries to do, it will be quickly mark this driver as being a troublemaker and bring down the system safely above all corruption may occur.

-After activation of the Verifier and rebooting the system, according to the culprit, if for example, the driver is started, you may not return to normal Windows because Driver Verifier detects in violation almost right away, and as noted above, which will cause / force a BSOD.

In this case, do not panic, follow these steps:

-Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

-Once in Mode safe - start > Search > type "cmd" without the quotes.

-To disable the Driver Verifier feature, type cmd ' auditor/Reset"without the quotes.

-Reboot and start Windows normally.

If your OS has become corrupt or you cannot start Windows after you disable the auditor through Safe Mode:

-Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

-Once in Mode safe - start > type "System Restore" without the quotes.

-Select the previously created restore point.

-Note that Safe Mode for Windows 8/8.1 is a little different, and you may need to try different methods: 5 ways to boot into Safe Mode on Windows 8 and Windows 8.1

How long can I keep the compatible driver verifier for?

I recommend keeping it activated for at least 24 hours. If you do not BSOD right there, turn off Driver Verifier. Usually, I say if, yes or no, I would like for you to keep active longer.

My system BSODS with enabled, driver verifier where I can find the crash dumps?

-If you have the system planned to generate small images of memory, they are in the %systemroot%\Minidump.

-If you have the system planned to generate images of the kernel memory, it will be located in the % systemroot % Directory and labeled MEMORY. DMP.

For any other question can most likely be answered by this article:

http://support.Microsoft.com/kb/244617

Kind regards

Patrick

Power failure Win8 64 pilot State

Hello

I recently bought a new laptop from MSI GE70 and everything worked well until one a week ago. If my laptop has been for awhile or has entered sleep mode/setting Hibernate mode, the wireless stop working completely, restart or stop for a little time will not always solve it and even if it's a disconnect to reboot I get a bsod with this failure. I don't know which driver is causing the problem and would appreciate help how to solve this problem.

I downloaded a few files minidump here https://skydrive.live.com/redir?resid=921ED72E4EEED416! 168 & authkey =! AKiWbFOcTSs_JwM&ithint=file%2c.rar

Thank you!

KZ

This accident was related to NETwew00.sys Intel® Wireless WiFi Link Driver of Intel Corporation. I would like to re - install the latest driver available.

Driver power state failure ntoskrnl.exe when shutting down

Hi, when I shut down my computer, I get the BSOD, DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe. Here are my files dump https://dl.dropboxusercontent.com/u/5085743/dump.zip

Thank you very much!

Gameboy90

In addition to suggestions of Patricks I would also update the driver associated with USB driver from VMware, Inc. VMware. Yours is 4 years old and cant work properly to win 8.

I would like to re - install the latest driver available.

Windows Driver power state failure ntoskrnl.exe bluescreen pro 8.1

Hello!

In recent weeks, I have a problem with my computer laptop vaio. At random times, I get a blue screen. The last 3 dmp files are here http://1drv.ms/1rVI4al.

I run SFC/scannow, but he found no violations of integrity

Thanks for the help!

Hello

All attached files of the DMP are the bug check DRIVER_POWER_STATE_FAILURE (9f) .

This bug check indicates that the driver is in an inconsistent or invalid power state.

9F error checking, {3, ffffe000170fe2a0, fffff8008a507c80, ffffe000116f6bd0}

If we run one! Check irp on the 4th parameter of the bug, we get the following:

> [16, 2] e1 0 ffffe00016f5f030 fffff800889a82d8-ffffe00018c84f00 00000000 success error cancel pending
Failed to load image \SystemRoot\system32\DRIVERS\btfilter.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for btfilter.sys
ERROR: Module load completed but symbols can be loaded for btfilter.sys
\Driver\BtFilter nt! PopRequestCompletion

btfilter.sys is the Atheros Bluetooth driver.

Update your drivers Atheros BLuetooth via the site of Sony ASAP - http://esupport.sony.com/perl/select-system.pl?DIRECTOR=DRIVER

Kind regards

Patrick

USB X121e failure after hibernation, stop along with BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe

Hello. This is a brand new X121e. The half of the time when resume after hibernation, USB devices are not recognized, Device Manager freezes on the analysis of the changes of material and then stop the system or another attempt to Hibernate (a duration of 10 minutes give or take) it BSOD

(DRIVER_POWER_STATE_FAILURE, * STOP: 0x1000009f (0 x 0xfffffa80030e6040, 0 x 0000000000000004, 0000000000000258, 0xfffff800049343d0) * ntoskrnl.exe - address 0xfffff80002e954da base at 0xfffff80002e16000 DateStamp 0x4e02aaa3).

The last time she due to same corruption to my work (which was open during the crash) which chkdsk fixed only partially. In addition, some programs back on their default settings for some reason any.

Played around with the drivers, has rejected the deactivation of USB devices, deleted some software, the Lenovo Power Manager, lost count of what I've done so far and how many days devoted to the research on the forums. Any help, please?

Thanks for the help, guys. Solved by getting my own DVD Win 7, done the clean install without tons of bloatware Lenovo. So far so good.

BSOD, BCCode f9, caused by ntoskrnl.exe, could you please help me with this?

I get the BSOD with f9 code and I do not understand what is? Could you please advice what may cause this? I'm not sure,
It happen when I stop or restart (15 minutes with him saying to stop) followed by BSOD (pilot State power failure).
Once I'm back I can see that Windows has recovered from unexpected shutdown down. Using BlueScreenView tells me that ntoskrnl.exe is the cause.
I was wondering if it has something to do with the USB Ports, because it won't work as a plug-and-Play (need to reboot USB is plugged).

I reinstall all the USB drivers.

My system:
ASUS Z170A
nVIDIA GTX 980ti

850 M2 OF EVO 250 GB SSD

Intel Core i7 - 4700 k
32 GB of RAM (4 sticks 8 GB)
Windows 7 64 bit

All up to date.

==================================================
Name of the file: ntoskrnl.exe
Address of stack: ntoskrnl.exe + e23f0
Address: Fffff800'0325e000
Address: Fffff800'03844000
Size: 0x005e6000
Time stamp: 0x5708972e
Time string: 09/04/2016 13:46:22
Product name: Microsoft® Windows® Operating System
File description: NT kernel & system
File version: 6.1.7601.23418 (win7sp1_ldr.160408 - 2045)
Company: Microsoft Corporation
Full path: C:\Windows\system32\ntoskrnl.exe
==================================================
==================================================
Dump file: 081316-13447 - 01.dmp
Crash time: 13/08/2016-12:46:05
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80'1a0f1060
Parameter 3: fffff800'052373 d 8
Parameter 4: fffffa80'1f739c60
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 6f400
File description: NT kernel & system
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.23418 (win7sp1_ldr.160408 - 2045)
CPU: x 64
Plant address: ntoskrnl.exe + 6f400
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\081316-13447-01.dmp
Number of processors: 8
Main version: 15
Minor Version: 7601
Size of the dump file: 1 250 528
Dump of file time: 13/08/2016-12:47
==================================================

Hello

There is a possibility that there is a problem with a driver on your PC. Here are a few things to try:
- If you know which driver is causing the problem, update.
- Make sure your hardware drivers are updated.
Please keep us updated.

Kind regards.

BSOD while browsing with Chrome - Crash address ntoskrnl.exe + 5 has 440

Hello, everyone. My laptop Dell Inspiron 1425, and the operating system is Windows 8 64-bit.

These two days I get a blue screen while browsing with Chrome. So far, it's happened three times. Minidump files, we can see that the drivers that caused them are different, but their address of accident are the same: ntoskrnl.exe + 5 has 440. And each one happened when I was browsing with Chrome, I think they are relevant. Here's my Minidump files:
https://SkyDrive.live.com/redir?RESID=77106B4AC1BE0CA8! 10830

Thank you for your help :)

Hello

We have two bugs attached landfills here:

DPC_WATCHDOG_VIOLATION (133)

Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above. The value of parameter 1 indicates whether one single DPC exceeded a timeout, or if the system is cumulatively spent a long period of time IRQL DISPATCH_LEVEL or higher.

I notice you have installed Norton. I will recommend to temporary troubleshooting purposes remove you Norton and replace it with built-in Windows Defender from Windows 8.

Norton removal tool - ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

If the removal and replacement of Norton do not help, the second error checking is:

VIDEO_TDR_FAILURE (116)

The basic definition of a bugcheck 0 x 116 is:

There may be a bug in the video driver or video material.

So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

Timeout detection:

Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

Preparation for recovery:

The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

Recovery of funds:

The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

Article here.

That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

The following hardware problems may cause a TDR event:

1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

GPU tests: Furmark

RAM test: Memtest86 +.

3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

HARD drive Diagnostics: http://www.carrona.org/hddiag.html

To reset your swap file, follow these steps:

(a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

-Then click on the Advanced tab.
- then the Performance Settings button.
- then on the tab advanced following.
-and then click the virtual memory button.

(b) in this window, note the current settings of your swap file (so you can restore them later).

-Then click on the option button "No paging file", and
- Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
-Click OK to exit the dialog boxes.

(c) restarted (this will remove the file from your system)

((d) then go back following the directions in step one) and re-enter the settings that you noted in step

(b) follow the steps along the (and including) the reset.

(e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

Run the System File Checker:

SFC. EXE/SCANNOW

Click on start and type "cmd.exe" (without the quotes)

At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

Let the program run and after return what he says when it's done.

-Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

-GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

The following software issues can cause a TDR event:

-Incompatible drivers of any kind (two GPU, sound, etc)

-Messy registry / corrupted

-DirectX bad files (uninstall and reinstall DirectX)

-bad system files (System File Checker - has been run on it)

-Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

Kind regards

Patrick

BSOD help (ntoskrnl.exe)

I recently built a new computer for the first time and I am constantly a BSOD. After consulting the minidump via the blue screen view files, it refers to the ntoskrnl.exe as the cause, but I suspect that maybe it's a corrupt driver (I could be wrong but). Due to my lack of experience on this subject, however, I have no idea on how to identify the guilty and so need help. As a result, I posted a link below containing the minidump files created by my computer and wish for some assistance on the interruption of information (any help would be greatly appreciated).

http://www.mediafire.com/download/khtsg34cxn75t41/minidump.zip

Thank you
WildThing0079

Great, thank you very much.

We have various bug different controls:

PFN_LIST_CORRUPT (4th)

This indicates that the page frame number (PFN) list is corrupted.

This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list. However, this bug control seems as frequently when there is a defective material, most often RAM or HARD disk.

MEMORY_MANAGEMENT (1A)

This indicates that an error occurred serious memory management.

Error checking 1 a, {41287, 0, 0, 0}

-1 setting of the bug check is 41287 indicating an illegal page fault occurred while now fixed synchronization of work.

* Addition 41287, we have also the 1st parameter is 403 which indicates the table of page and NFPs are out of sync. It is probably a hardware error, although the device driver causing corruption is possible as well.

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory was referenced.

Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

Another common cause is a defective system service installation.

Antivirus software can also cause this error, as a corrupted NTFS volume can do him.

System_service_exception (3B)

This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.

This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

-----------------------

1. AppleCharger.sys is listed and loaded, this is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

He is well known to cause BSOD, so please delete it as soon as POSSIBLE.

2 even with gdrv.sys, which is the easy profit from Gigabyte - mobo utility power driver. Remove as soon as possible.

3 remove and reinstall Kaspersky with temporary Microsoft Security Essentials for troubleshooting purposes:

Kaspersky - remove http://support.Kaspersky.com/common/service.aspx?El=1464

MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

Kind regards

Patrick

Windows 8 blue screen - DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

I have a new Sony Vaio Pro and have experienced outages of system 3 times. All the accidents that happened after I've restored from hibernation and were related to the bug check DRIVER_POWER_STATE_FAILURE. After the first two accidents, I ran Sony diagnostics on the memory and hard drive SSD and they passed the test. I even sent my Vaio Pro to the repair depot to Sony for a test on the memory, hard drive and other hardware and they all passed.

I found my Vaio Pro last Wednesday and updated the Windows 8 from scratch. This morning, after the resumption of hibernation, I realized my Bluetooth mouse did not work. So I stop the laptop hoping a restart could solve the problem. However, it took almost 5 minutes before they would stop and restart Windows gave a warning:

"Experienced problem with closed Windows. Your PC fell on problem. This problem case your PC to restart.

BlueScreen Viewer it pointing DRIVER_POWER_STATE_FAILURE caused by driver ntoskrnl.exe.

BlueScreen details as follows:

A problem has been detected and Windows has shut down to prevent damage to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

DRIVER_POWER_STATE_FAILURE

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is installed correctly.

If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading.

If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options and then

select Safe Mode.

Technical information:

STOP: 0X0000009F (0X000000000000012C, 0XFFFFFA80196707C0, 0 X 0000000000000004, 0XFFFFF880009EC810)

Ntoskrnl.exe - address 0xfffff80189072106 base at 0xfffff8018901e000 DateStamp

0x51a966cd

Here's my minidump file:

https://DL.dropboxusercontent.com/u/1928780/093013-7531-01.dmp

File Msinfo32.NFO:

https://DL.dropboxusercontent.com/u/1928780/Msinfo32.nfo

Dump file memory (do not know why this file is nearby big 550MO):

https://DL.dropboxusercontent.com/u/1928780/memory.dmp

p.s. I think this may have something to do with my Bluetooth driver I had experienced many times the Bluetooth driver has been disabled by Windows and the event viewer reported "the Local Bluetooth is not indeterminate way and will not be used. The driver has been unloaded. "

Thanks in advance,

William

Hi William,.

The attached file of the DMP is the error checking DRIVER_POWER_STATE_FAILURE (9f) .

This bug check indicates that the driver is in an inconsistent or invalid power state.

9F, {4, 12 c, fffffa80196707c0, fffff880009ec810} error checking

Parameter 1 of the bugcheck is 4 , which indicates that the transition of power over waiting to synchronize with the Pnp subsystem.

The 2nd setting is 12 c , which indicates that it is exceeded for a total of 12 seconds.

By default, the crash dump is failing UsbHub3.sys who is the pilot of HUB-USB3 (System driver and not the true cause, and is due to the fault by something else).

If we look further into the dump:

ERROR: Module load completed but symbols could not be loaded for btmhsf.sys

FAILURE_BUCKET_ID: 0x9F_4_btmhsf_IMAGE_UsbHub3.sys

Implicit thread is now fffffa80 196707 c 0

^^ If we run one! thread on the address fffffa80 196707 c 0:

Child-SP RetAddr: Args to child: call Site
fffff880 '20b42f20 fffff801' 890bb7cb: fffffa80'00000001 00000000'00000000 00000000'00000003 00000000'00000000: nt! KiSwapContext + 0 x 76
fffff880 '20b 43060 fffff801' 890ba60f: fffffa80'18b23ef8 fffff880 '0115a 178 00000000 00000000' fffff880' 0622a 202: nt! KiCommitThreadWait + 0x23b
fffff880'20 b 43120 fffff880'06114700: fffffa80 '16115fd8 fffff880' 00000001 00000000' 00000000 00000000'00000000: nt! KeWaitForSingleObject + 0x1cf
"fffff880 '20b431b0 fffff880' 06117ef0: 00000000 ' 00000018 fffff880 ' 0622a2f8 00000000'00000000 00000000'00000018: btmhsf+ 0 x 33700
fffff880 '20b431f0 fffff880' 060fb1e4: fffffa80'17 has 00030 fffff880 '20b433b0 fffff880' 0622a2f8 00000000' 00000000: btmhsf+ 0x36ef0
fffff880 '20b 43260 fffff880' 060e2b84: 0000057f 'e9eaddd8 00000000' 00000127 fffff880 '0622a2f8 fffff880' 0115 has 178: btmhsf+ 0x1a1e4
fffff880 '20b432b0 fffff880' 060e2cce: 00000000'00000008 fffff880 '20b 43370 00000000'00000008 fffff880' 20b 43378: btmhsf+ 0x1b84
fffff880 '20b432e0 fffff880' 0114ecb0: fffffa80'16153860 00000000 00000000' fffff8a0 '04c3a748 fffff801' 89403cfe: btmhsf+ 0x1cce
"fffff880 '20b 43310 fffff880' 010e881d: 00000000 ' 00000127 fffff880 ' 20b433b0 00000000'00000119 fffffa80'16153860: Wdf01000! FxPkgPnp::PnpEventSurpriseRemoveIoStarted + 0x2c
"fffff880 '20b 43340 fffff880' 010e9032: fffffa80 ' 16153980 fffffa80' 16153988 fffffa80 ' 16153860 fffff880 ' 20b434c0: Wdf01000! FxPkgPnp::PnpEnterNewState + 0x1a1
"fffff880 '20b433e0 fffff880' 010e8cdd: 00000000 ' 00000000 fffff880 ' 20b434c0 fffffa80 ' 16153970 fffffa80' 16153860: Wdf01000! FxPkgPnp::PnpProcessEventInner + 0 x 122
fffff880'20 b 43450 fffff880'0114 701 d: 00000000 00000000' fffffa80 '16153860 fffff880' 00000000 00000000 00000000': Wdf01000! FxPkgPnp::PnpProcessEvent + 0x18d
fffff880 '20b434f0 fffff880' 010d1ecf: fffffa80'16141 b 30 fffff880 '20b 43570 00000000 00000000' fffffa80' 1615d1d0: Wdf01000! FxPkgFdo::_PnpSurpriseRemoval + 0 x 25
fffff880 '20b 43520 fffff880' 010c99da: fffffa80'197 b 9010 fffffa80 '197b 9010 fffffa80' 197b 9010 00000000 00000000': Wdf01000! FxPkgPnp::Dispatch + 0x18f
"fffff880 '20b 43580 fffff880' 010c9aa6: fffffa80' 197b 9010 00000000'00000005 fffffa80 ' 161531 c 0 fffff880 ' 062fca20: Wdf01000! FxDevice::Dispatch + 0x19a
fffff880 '20b435c0 fffff880' 062e3cbe: fffffa80 '197b 9010 00000000 00000005' fffffa80' 1615e190 00000000' 00000000: Wdf01000! FxDevice::DispatchWithLock + 0xa6
fffff880 '20b 43600 fffff880' 062e3484: fffffa80 '197b 9010 00000000 00000000' fffffa80' 1615e190 00000000' 00000000: bthport! BthDefaultPnpHandler + 0x2a
fffff880 '20b 43630 fffff880' 062e2cc1: fffffa80 ' 1615e190 fffff880 '062fca17 fffffa80' 1615e190 fffffa80 ' 197b 9010: bthport! BthHandleSurpriseRemoval + 0xc4
fffff880 '20b436b0 fffff880' 062e2b04: fffffa80' 197b 9010 00000000'00000701 fffff880 '062fca20 fffff880' 20b 43800: bthport! BthHandlePnp + 0x16d
fffff880 '20b 43700 fffff801' 8940a8f7: fffffa80 '1615e040 00000000' c00000bb 00000000 00000000' fffff880' 00a 82180: bthport! BthDispatchPnp + 0 x 68
"fffff880'20 b 43750 89526 fffff801 39 d: 00000000 ' 00000017 fffff880 ' 20b 43819 fffffa80 ' 16137710 fffffa80' 16137060: nt! IopSynchronousCall + 0xc7
fffff880 '20b437c0 fffff801' 895265e6: fffff8a0 ' 04069710 00000000'00000308 fffffa80' 16137060 00000000 00000000': nt! IopRemoveDevice + 0xd9
fffff880'20 b 43880 fffff801'89526501: fffffa80'16137710 00000000 00000000' fffff8a0 '0c432a01 fffff880' 20b 43930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
fffff880'20b438d0 fffff801'89526468: fffff8a0 00000000'00000000 00000000'00000000 ' 0c432a70 fffffa80'16137710: nt! PnpDeleteLockedDeviceNode + 0x5d
fffff880 '20b 43910 fffff801' 89525bcb: 00000000 00000000' fffff880 '20b43a70 fffff8a0' 0b89e6f0 00000000'00000005: nt! PnpDeleteLockedDeviceNodes + 0 x 98
fffff880 '20b 43970 fffff801' 893b52e5: fffff880'20b43b88 00000000 00000000' fffff8a0 ' 05764100 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
fffff880'20b43ae0 fffff801'89418346: fffff8a0'04069710 00000000'00000000 00000000'00000001 00000000'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
"fffff880 '20b43b20 fffff801' 890b62a1: fffffa80 ' 196707 c 0 fffff8a0 ' 0b89e6f0 fffff801 ' 8941805 c fffffa80' 16748130: nt! PnpDeviceEventWorker + 0x2ea
"fffff880 '20b43b80 fffff801' 8904afd9: fffffa80 ' 00180000 00000000 00000080' fffff801 ' b 890, 6160 fffffa80 196707 c 0: nt! ExpWorkerThread + 0 x 142
fffff880 '20b43c10 fffff801' 890ff7e6: fffff880 ' 00a 82180 fffffa80 ' 196707 c 0 fffffa80 ' 06741b 00 fffffa80' 06765940: nt! PspSystemThreadStartup + 0 x 59
fffff880'20b43c60 00000000' 00000000: fffff880 '20b 44000 fffff880' 20b3e000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

We can see the various routine calls BTHUSB Device bthport.sys (Bus Bluetooth driver) who then finally enter various before btmhsf.sys some error checking.

btmhsf.sys is the Intel Proset Bluetooth HighSpeed filter driver and probably the culprit here. Update this driver ASAP - http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr
or uninstall it if you do not plan to use BlueTooth.

---------------------------------------------------------------------

If after doing the above, you are still blocked, remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

-AVG removal tool http://www.Avg.com/us-en/utilities

In addition, to answer your question as to why the MEMORY. DPM is so important because it's a dump of memory rather than a small kernel. Kernel memory dumps contain all the kernel memory was working with and that was in use at the time of the accident, that is why it is larger and provides much more information.

Kind regards

Patrick

Configuring updates... Missing or corrupt NTOSKRNL.exe

Hello

I have a sony VGN NR260E, (Windows Vista Home Premium) recently on power, windows entered the dreaded

Configuring updates 1 3 mode...
She was followed by a reboot that caused the error

Windows boot manager cannot start Windows...
File ntoskrnl.exe
Status: 0xc0000098
Info: windows could not load because a required file is missing or damaged

So, fortunately I have a recovery disk and I did a recovery to a previous restore point - and windows came fine. Since then, I have disabled the Windows updates

The problem is in the power down and turn on the system back in the
Configuration of updates (followed by a ntoskrnl.exe error restart failure) mode

The result is that
1. I cannot turn off without going through this lengthy procedure
2. I can't get updates

So, how to stop windows from "reflection", there is somehting to configure (new can't power upward).

I also tried the fix Windows6. 0-KB937287-v2 - x 86, but when I run it it says it isn't neceassry (or something similar) on my system

Please help because it is originally no end of grief

Thank you

Hello

Yes it shouldn't affect other updates, however this never caused that it could.

Good idea to run these just in case where after any hotfix:

Try these to erase corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

---------------------------------------

So don't forget to run these two:

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
http://support.Microsoft.com/kb/947821

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

My computer will not start - ntoskrnl.exe is missing

Original title: my computer does not start upp

my desktop does not load upward. I turned on and the following message appears.

Windows didn't start because the following file is missing

corrupted:

Windows root>\system32\ntoskrnl.exe.

Re - install a copy of the above file.

is there something I can do?

I don't have the boot disks.

There were no power failure, etc.?

The system is equipped with a CD/DVD player?

I suspect that AVG has quarantined (effectively deleted) your way of thinking of ntoskrnl.exe file the file has been afflicted (it's perhaps), but there are copies on your system in other places, so you can simply replace the missing file.

I would normally say that make you a XP Recovery Console bootable CD that you can create (no XP media required), but since you have XP Home Edition, which can frustrate you if you do not know the XP administrator password. We can do the part later because it would be a good CD to have.

Make a Hiren boot CD, boot your system on this CD and find your XP installation boot drive for a copy of ntoskrnl.exe and copy / paste the file into the c:\windows\system32 folder where it belongs.

Places to find backups of critical files on the XP system are:

c:\Windows\System32\dllcache

c:\windows\ServicePackFiles\i386

Answered in the affirmative if invited to replace the existing file.

If that's all you need to do to get there, you should consider broadening your horizons beyond AVG antivirus antimalware if you do not have this or similar problems.

Do you have a Hiren BootCD you can download here:

http://www.hirensbootcd.org/

On the left, click on download, scroll down, choose the most recent version

The download link is a little difficult to see and find, for some reason, so here are some ideas (they seem to change around for a reason, but that might just me my interpretation). If you can't understand it, let me know so that I can update my copy/paste route.

On the page for the version the most recent are information pages on what has changed in the latest version. Look to the bottom of the page and you will be on page 1 of a number of pages (1 of 2 of 9, 9, 9, 3)... The link to download the ZIP file is on the last page that is now for version 12, page 9 (or click on the end button).

The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.

More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

If you need a simple and CD burning, this is a free software popular software:

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your new bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.

When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP. It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Blue screen - ntoskrnl.exe was able to start: kernel missing/corrupted dxgkrnl.sys

original title: BSOD and freezes, several errors reported, puzzled.

Hello

I've been struggling with trying to understand an intermittent problem for the last 3 weeks. The problem has been around for one more month, but it seems to happen more and more often can't find the source. I wish I could attach the dump files memory here, but don't see any option for this. So here it goes...

Have had this computer for 2-3 years and have not changed the material at all and only the drivers updated.

CPU: Intel Core i7 CPU * address email is removed from the privacy *.

Motherboard: ACPI x 64

PowerSource: Power TX 750W.

2 Hardrives: WDC - WD6401AALS-00L3B2 ATA

6 GB OF RAM

Graphics card: NVIDIA GeForce GTX 260

I have wiped the two HD, reinstalled Vista. I've updated the Vista completely. I've updated the following drivers to their latest: graphics card, motherboard, map its (motherboard), LAN (motherboard).

The computer crashes more often that the BSOD appears. When it freezes, the sound plays all that was the last one on again and again and nothing does. No data memory is dumped to the crash. I checked with another computer that is on the network to see if she could still access shared files and that he could not. It has frozen or gave the BSOD when just doing electronic-mail/surf net or playing dungeons and Online (DDO dragons).

Challenges in a relationship with install/updates: SP2 would not install through normal updating, so a download and install manually. DDO requires NET framework 1.1 to run. Had to integrate the installation so that it can install. Do not remember having to do in the past. The point of freezing/BSOD is always the same before and after I did the complete wipe.

Made the following stress tests:

Don't use memtest 86 + (2.11 and version 4.10) x no errors, 8 longer past track.

Used Furmark 1.8.2 V max stress test, ran all night without crashing.

Used Video Card Stability Test (Group in stone), no problem.

Used Seagate Diagnostics on HD, long and short no trials, no failure.

Reported on BSOD errors:

Ntoskrnl.exe could not start: missing/corrupted core

dxgkrnl.sys

driver_IRQL_NOT_LESS_OR_EQUAL nvlddmkm.sys

More information on these if necessary.

I get about 5 freezes with no info to each BSOD with info. Very hard to debug with any info.

I've had freezes/BSOD occur minutes after the computer starts and the hours. Have the box to open with an external fan blowing into the case. Don't think overheating is the problem. No overclocking ever carried out on the system.

I'm relearning all debugging stuff, did not have to do this in a long time any help would be very appreciated.

Thanks in advance for your help.

Hello

If you do not remove ANY power and reconnect the cables (at both ends, memory and cards)
When possible) - in fact, remove and replace - do not just tight.

As you re-installed Vista twice the question must be something that works with a low level
as the BIOS, chipset of low level drivers or hardware.

You can validate files minidumps on the SkyDrive or other file sharing sites so that they can be
downloaded, and we will have a look. But to be honest they will reveal probably material
or worth nothing useful, so.

Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-----------------------------------------------------------------------------

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

I hope this helps and happy holidays!

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Random BSOD and I do not know why.__Unable to load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32

I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.

What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loud

I know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?

I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?

Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.

Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path.           *
* Use .symfix to get the debugger to choose a symbol path.                   *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
*                                                                   *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable.                 *
* with the help of the there when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
Computer name:
Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
System Uptime: 3 days 5:21:50.657
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
*                                                                   *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable.                 *
* with the help of the there when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
................................................................
................................................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}

The kernel symbols are FALSE. Correct symbols to do the analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
Probably caused by: ntoskrnl.exe (nt + e95c)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: fffffa7fffffffea, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002c5a95c, address memory

Debugging information:
------------------

The kernel symbols are FALSE. Correct symbols to do the analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************

ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002c4c000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f

READ_ADDRESS: could not get nt! MmSpecialPoolStart
Unable to get nt! MmSpecialPoolEnd
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
fffffa7fffffffea

CURRENT_IRQL: 0

FAULTING_IP:
NT + e95c
fffff800'02c5a95c?              ???

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0XA

LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0

STACK_TEXT:
fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2

STACK_COMMAND: .bugcheck; Ko

FOLLOWUP_IP:
NT + e95c
fffff800'02c5a95c?              ???

SYMBOL_NAME: nt + e95c

FOLLOWUP_NAME: MachineOwner

Nom_image: ntoskrnl.exe

BUCKET_ID: WRONG_SYMBOLS

Follow-up: MachineOwner
---------

I'm grateful for any help I can get in that case.

My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU

Postal salvation,

I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.

Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).

Here's how to new:

http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.

virus/malware programs:

Symantec:

Works in Safe Mode and free:

_ http://security.symantec.com/sscv6/WelcomePage.asp

Trend Micro

_ http://housecall.trendmicro.com/

Ad-ware/spyware:

Ad-aware

http://www.lavasoftusa.com/

Spybot Search and Destroy

http://www.safer-networking.org/

* It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.

See you soon,.

Steve <> Microsoft Partner

Please help me solve this BSOD ntoskrnl.exe, ntkrnlmp.exe

Hello

I have problems with my new computer since I bought it, it started giving problems. Now this BSOD. I am totally frustrated with it. Please help me get rid of this questions.

Here is the link of the minidump file:

https://SkyDrive.live.com/redir?RESID=1F218460C89B0917%21114

I guess that the culprit is wireless driver. With the old version of the wireless driver, I got another BSOD, so I uninstalled and installed the most recent version. Still problem persists.

With whoCrashed, I found this information:

Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
Windows dir: C:\Windows
CPU: GenuineIntel Intel (r) Core i7-3610QM CPU @ 2.30 GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8469991424 total
VM: 2147352576, free: 1902690304

Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump

Dumps are enabled on your computer.

Tuesday, December 23, 13 9:36:04 CEST your computer crashed
crash dump file: C:\Windows\Minidump\122313-27736-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 72680)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Tuesday, December 23, 13 9:36:04 CEST your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
Error: DRIVER_POWER_STATE_FAILURE
Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Please help me. Thanks in advance.

Apvmz

This phenomenon was related to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc. Yours is almost 2 years so not the most recent.

I would like to re - install the latest driver available

Power failure ntoskrnl.exe pilot State

Similar Questions

Maybe you are looking for