Power indicator HP 6207C does not.
I have a grilled HP 6207 C power led sur-sommeil n. Anyone know if I can get all of the lamp?
Thank you
Yes, I found the part on EBay for $7,37 plus 3.60 in shipping. I replaced it 5 minutes and now I see when my HP is on.
Tags: HP Desktops
Similar Questions
-
Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.
Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.
-
First off I would like to say that the code works on the other two (dev) PCs; but by operating on my clients PC - when the lance the façade program seems to load correctly except where the 3D graphical indicator is the area still shows everything on the monitor before (ie the place never gets repainted). All three PCs are Win7 and running LV12
If this is not a problem of LabVIEW, but something with PC graphics? or video settings?
Just thought that maybe this is a common thing with graphs (?) 3D and maybe someone can direct me in the right direction to a solution.
Thanx
lmd2
Ah, an ATI/AMD card. Would that maybe this problem has been corrected in sp2 LV2012?
365679 Optimization of 3D image of LabVIEW does not work with the AMD video card drivers.
BR,
/ Roger
-
HP HDX 9430EA - Media Console Power On / Off button does not
Help!
The HP HDX 9430EA - Media Console Power On / Off push button does not not but the light blue on the push button is still.
I think that HP Media Console rear plastic cover retained is part number 448161-001, but I'm not too sure.
Help, please
Concerning
AggyTheSlyFox
Hi BHK6,
The power switch suddenly started working again, I think it might be a dirty contact problem flattens.
Thanks a lot for your help.
Concerning
AggyTheSlyFox
-
After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
When I turn on my computer a warning appears indicating "delivery manager does not properly.
DEP original title: data
When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.
Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.
Hi Olliewoods,
(1) since when are you facing this problem?
(2) what is you receive the exact error message?
An application installed on the computer may be the cause of this problem; I suggest you try the following steps:
Method 1: Put the computer to boot to determine which application is causing the problem.
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
See the link below for more information on Data Execution Prevention
Data Execution Prevention: Frequently asked questionsThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
power cli script works does not in 5.5-was prior work
I am trying to perform actions on the virtual machines that reside in a csv file. Here's what I have:
to connect-viserver $vcenter
foreach ()$_.name in ("Import-Csv " "$ENV: USERPROFILE\Desktop\vm_list.csv ' -UseCulture)) { }
$VM = Get-VM $_. name
Get-VM $VM | Where {$_. PowerState -eq "PoweredOn"} |
Select Name, Host, NumCpu, MemoryMB,
@{N='Cpu.UsageMhz.Average';} E={[Math]::Round((($_ | Get-Stat -Stat cpu.usagemhz.average -Start Get-Date(). () AddHours (-24) -IntervalMins 5 -MaxSamples (12) | Measure-object Value -Average). Average) , 2 )}},
@{N='Mem.Usage.Average';} E={[Math]::Round((($_ | Get-Stat -Stat mem.usage.average -Start Get-Date(). () AddHours (-24) -IntervalMins 5 -MaxSamples (12) | Measure-object Value -Average). Average) , 2 )}} `
| Export-Csv c:\Temp\stats.csv
}
NOTE - If I get rid of the thing whole 'foreach' script works fine Get - VM and down by removing the $VM variable)
But I want to get the data of perf for VMs on my list, not only of each of them via the GET - VM against the whole vcEnter.
Any ideas why it's a failure? in 5.0, I ran a script that mobilized the "foreach" exactly as you see above and it worked great. Now we are at 5.5 is more does not work.
Output showing the errors that have baffled me:
C:\Users\kwg\Desktop\test2.ps1:8 tank: 12
+ foreach ($_.name in (Import-Csv "$ENV:USERPROFILE\Desktop\vm_ip.csv")
-UseCulture...
+ ~
Missing 'in' after variable in the foreach loop.
C:\Users\kwg\Desktop\test2.ps1:8 tank: 83
+ ... "- UseCulture)) {}".
+ ~
Unexpected token ')' in expression or statement.
+ CategoryInfo: ParserError: (:)) [], ParseException Exception)
+ FullyQualifiedErrorId: MissingInInForeach
Not sure why you use the pipeline variable ($_____) in the foreach loop?
There is no need to use a ForEach loop actually, you can pass several names for the Name parameter on the Get - VM cmdlet.
And then you use the pipeline at its maximum.
I would like
to connect-viserver $vcenter
Get-VM-name (Import-Csv "$ENV:USERPROFILE\Desktop\vm_list.csv" - UseCulture | % {$_.}) Name}) |
Where {$_.} PowerState - eq "Receptor"} |
Select Name, host, NumCpu, MemoryMB,
@{N = "Cpu.UsageMhz.Average"; E = {[Math]: round ((($_ |))} Get-Stat - Stat cpu.usagemhz.average - Start (Get-Date). AddHours(-24)-IntervalMins 5 - MaxSamples (12) | Measure - Object - average value). Average), 2)}},
@{N = "Mem.Usage.Average"; E = {[Math]: round ((($_ |))} Get-Stat - Stat mem.usage.average - Start (Get-Date). AddHours(-24)-IntervalMins 5 - MaxSamples (12) | Measure - Object - average value). Average), 2)}} |
Export-Csv c:\Temp\stats.csv
-
Satellite P200 - Power Saver in XP does not
Hello
I decided to make another thread so that questions can be answered. Right, so I installed Power Saver Driver, then reboot and then I install Power Saver, but when I try to access it from Control Panel I get a message saying 'CANNOT be opened because you do not access right to use 'TOSHIBA Power Saver'. Now, when I go in the SYs32 directory and search for Toshiba Power Saver related files I find a file named TPSBattM and when I try to run I get a "a fatal error has occurred, Code: 0 x 2.
I tried to reinstall and withdrawal, but it still isn't working. No one has a fix for this because this problem has been so annoying on plu laptop since then and TOSHIBA still have not resolved it.
I can't find the common Modules for Satellite P200-144. If someone could find them then it should start working again.Thank you and please someone try to help me.
Neo-techWhy do you start different threads on the same topic?
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=114278#114278You must follow the premiera!
-
Satellite M35-S456: no right to run the Power Saver & FN keys does not work
Hello
I've had this laptop for a few years now, and just recently the comp crashed and required a complete reformat. I lost my recovery CD (let a friend borrow it and he got lost somewhere) and had to use just reformat using my Windows XP pro CD
After that, I went to the toshibas website and downloaded many utilities that came with my laptop originally, but I'm having a few problems of.
1. I can't use Power Saver. Whenever I try to open it, it says: "Cannot open because you don't have access rights to open"toshiba Power Saver""
2 - function keys do not work. The light comes on, but nothing happens when I press a buttonAnd without people, I cannot adjust the brightness (among others) and we tried everything that I can find
Someone has ideas how solve these two problems, or know where I can get a copy of the recovery CD
Thank you
Hello
Form where you download the Toshiba tools and utilities?
It seems that your laptop has been delivered only to the United States and you must use the tools and the American pilots.You know the page?
Visit this link:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jspI think you used the wrong drivers and tools or if you have not installed the applications in the right order.
PS; Remember that you are logged on as administrator or if you have an administrator rights before you try to run the installation
-
Since I started so that connected beep 3 months in Nicaragua (this voltage converter) my Compaq Presario CQ61 Notebook power and charge more.
When you're disconnected beeps constantly.
Is it possible that the problem is solved when the power supply cools at an ideal temperature or you hear a beep that it will be necessary to get a new charger?
Thanks for your replies!
The temperature is unlikely to be the cause of the problem.
The power adapter (sometimes called power brick) is designed to operate in a wide range of voltages (from 100-120 Volts AC) or 220 - 240 Volts AC) the only thing that differs is the type of power connector used to connect the power adapter to a wall outlet of the home or office.
Remove the converter and use the correct power cord or travel adapter Nicaraugua. Your adapter will not explode or be damaged. Converter is likely to be the issue.
You need a North American power cord to the adapter. You should be able to buy one on site or just go into a travel store and buy a travel adapter set. That's what I have for when I travel to the United States for business or travel. I bought my Brookstone set for about $30.00 USD.
-
I have problems with my printer since arriving to a new home. I stop the printer before removing the cable, but seems could have pulled the power cable earlier than closing down.
Since that time, the printer is looping with message "to avoid damage to use the off button /...» "- How do I stop and work again.
Please help!
Thank you.
Heck!
I was really hoping that would not be the issue.
So, if I understand it, the question you receive looks like this;
"It lights up and shows the HP logo and process bar animation for one minute, followed by the message:"abnormal termination. " To avoid damage use on the button to turn off the printer. Do not use a wall or the band switch to close. Press OK. Then he stops and leaves upward. »
Try this:
1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.
2 unplug the power cord also from the wall...
3. wait for two minutes.
4 reconnect the power cord to a wall outlet first.
5. hold the pound (#) and six 6 buttons.
6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.
7. turn on the printer if it goes out...
Third times the charm, right? * fingers crossed *
-
I have Firefox and Thunderbird - both Act the same. When I double click on the exe icon, a process starts, visible in the Task Manager, but no application ever does appear, in applications, or no appaears window. Both worked earlier today.
Tried the checkdisk - no help.
I uninstalled (in safe mode because the uninstall program wouldn't work either) of the software of the printer, and then reinstalled as.
After that, thunderbird and firefox have both worked very well. Part of Windows must have got dirty up/stuck by being apparently corrupted printing software. Printer icon never showed up. Firefox and Thunderbird must have tried to read printer data at startup and hung out to dry...
Thanks for the quick reply
-
Satellite A200: Power saver TPSmain.exe does not start
Hello
I installed windows XP on my laptop Satellite A200, but I have a problem with the "Power Saver" (according to me, is the process name is TPSmain.exe).
This driver doesn't want to start, and there is a sound error at startup of windows.
I don't have the icon then the clock too.You know the problem?
Gael
(Sorry for my bad English ^^)Satellite A200 which series did you?
I ask because there are different A200 series and every single series takes care of own pilotsUpdate you the BIOS to the XP version?
As far as I know the BIOS should be updated to the XP version if an XP operating system has been installed.Have you installed SP2?
It's important too!Best regards
-
When I bought the laptop above, Windows 8 has loaded, however, due to some problems, I had to install Windows 7. Since the time I had the following problems:
the CAP and NUM lock indicator is no longer usable
the laptop is VERY slow
When you look at NETFLIX, the screen goes to sleep every 20 minutes
Your advice and help is greatly appreciated.
Sherry Winn
If you use Internet Explorer, this block of downloads, but a small bar will appear at the top or at the bottom of the browser windows.
I suggest you use Chrome, instead of Internet Explorer if possible and use it as default browser:
http://www.Google.com/intl/US/chrome/browser/
Chrome will download files easily, saving it under "Download" folder
-
The router will not connect to my computer. He repeats to me check the connections. They' fine rev.
Hi Tweetytewe,
This occurs on cable connections and wireless? If this happens on cable connections and wireless and your Windows installations are fine, you should contact linksys support to receive the best support.
http://www.linksysbycisco.com/US/en/support.
I hope this helps. Let us know if you have any questions.
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
HP ENVY 15-k008ne: Ram memory upgrade
Hi guys. I want to improve my ram from 8 GB to 16 GB. I have a HP ENVY 15 - k008ne Notebook PC (J8E89EA), after checking my info memory I found this:
-
Satellite A300-1ND - Microsoft laptop to discover bluetooth mouse
Hello I've struggled the last two days for a double Satellite A300-1ND startup that came with Vista Home Premium SP1 loaded and I install WXP Pro Sp3 on the second partition.Finally, I installed all the drivers, but Microsoft's Bluetooth notebook mou
-
Today, I received an SMS with an embedded URL. While trying to scroll the page, I inadvertently launched the URL which launched a Safari browser session. the URL pointed, http://SomeRandomCharacters/visitor.php. I quickly tried to close the browser,
-
video tearing watching the HD video
Video problem I have a hp compaq dc7600 SFF with intel GMA 950, pentium 4 HT dual core 3.0GHZ and 2 GB ram and I'm pretty sure that this GPU is capable of up to 720 p videos, but even on lower quality videos video flies over and half top video is alw
-
Hi all I have a little test lan with the installation of 2611xm for ipsec vpn. On each fe port I have a laptop plugged directly inside, int is assigned by dhcp, and outside at this stage is static. I use 3rd party ipsec client program shrewsoft custo