Power of fire management Centre HA Configuration

Similar Questions

• Power of fire vs NGIPS vs FireSight vs power of fire management center

  I am struggling to understand the distinction between these terms. Is anyone able to help me understand what are the components?

  Firepower is the term that Cisco uses during most of the acquis of Sourcefire products.

  FMC

  Power of fire aka Firesight Management Center aka Defense Center Management Center.
  Power of fire management centre was re-branded twice, its all the same

  Centralized management for devices of firepower (NGIPS, Module of ASA firepower, DFT)

  NGIPS

  Dedicated appliance IPS / IPS component of the solution of firepower (also used on the firepower of ASA and DFT module)

  ASA with power of Fire Services

  ASA with module of software/hardware that is running the services of firepower. (is two different images running on the same box. Traffic is redirected to the module of firepower for Layer 7 inspection)

  FTD

  Power of fire Threat Defense is the new unified combining image Software ASA and firepower into a single image. (not full parity of features to ASA still)

  If you need more let me know.

• Fire power User Agent is unable to connect with the power of fire management center

  Hi Cisco supports,

  I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

  My Version of power of fire management centre is 6.0.0.1

  and my 2.3 10 User Agent

  Hello

  You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

  You can capture packets on FMC cli and check if traffic reaches here.

  > tcpdump-i eth0 port 3306

• Time synchronization between the module of SFR (ASA5512) and the power of fire management center

  Hello.

  I deploy my network Cisco Management Center (for VMWare, v. 6.0.0) FirePOWER and tie SFR-module of Cisco ASA 5512. After you apply time in CMF settings, I have a synchronization errors for my module SFR ("TimeFor 172.16.x.x synchronization state is out-of-sync").

  This article presents a framework that allow the synchronization time SFR-module with CMF. But I don't have an option to set the time on managed devices, just for the CMF.

  Please, tell me how I can solve this problem. Thank you!

  I just went through this with TAC.  They pointed out that the documentation states that you should not synchronize SFR with a virtual CMF.  I found myself defining the CMF and SFR as you pull my domain controller, and everything was fine.

• How can power of fire management Center 6.0 - I Add Licenses of sensor.

  Hello friends,

  I bought licenses for the 4 sensors 'L-ASA5525-TA = "and they didn't come with any file PAK to add on the FMC.".  I contacted the Department of licensing and they tell me there is no PAK file for this product, since it is a complementary (BELIEVES) end user license agreement.  I'm confused, how do I get the licenses installed and works?

  Thanks in advance,

  Martin

  The type of license TA's IPS. TAC is correct that it does not include a separate license. It is rather a right of subscription to the IPS updates (updated rule Snort and vulnerability Database - SRU and VDB) via the Talos of Cisco's Cloud Computing service. As the right itself is not currently applied through technical means, there is no separate license associated with.

  The ASA base firepower module should have included no control license costs. If you swap that using the FMC license key, it will be show as "Protect + Control" and allow you to build protection against intrusions and related policies.

  The YOUR license allows you (by virtue of having bought it and accepted the additional EULA) for the SRU on demand or scheduled and VDB, updates to these policies use threatens the latest information available.

• Power of fire licensing management center

  I'm someone who is confused by the license, I hope someone can clarify this.

  I have a Cisco ASA5506X test setup that has the URL, AMP, IPS key installed via ASDM.

  I downloaded the power of fire. Mgmt Center 6.1.0 VM and tried to connect to the ASA.

  I wanted to use the eval. period of check of FMC.

  However, it seems that the licensing of the ASA does not apply to the CSP. Can I need separate licenses for FMC in addition to those on the SAA or do I have to reinstall these licenses on the CMF?

  You must first register the ASA of CMF (and vice versa) and then apply the CME licenses ASA newly managed.

  Licenses of firepower are linked to the license key (combination of model platform ID and MAC address) of the FMC Manager so you should rehost those you used initially ASDM.

  You can only manage a service module firepower since one - or the CMF-based ASDM - Manager at a time.

• What happens when the power of fire ASA subscription expires?

  What happens when ASA FirePowers subscription expires?

  What happens with the ASA? services continue to work? show an alarm?

  Thank you!

  Jorge

  If fire power module ("sfr") is more associated with a current license, policies applied by the management centre Firesight (CMF) will have no effect and you will not update in the event logs. FMC will warn you that your license (s) is expired assuming that you have a properly applied health strategy.

  The ASA base will continue to operate as usual. The redirection of traffic through service in the sfr module strategy will be largely ineffective.

• ASA with fire 5555 x Installation/Configuration/full features enablment

  Dear,

  I had a lot of confusion about the ASA with the power of fire all the new features, upgrade, changes made me lost.

  Can someone describes the steps to install the ASA with firepower and upgrade its image & package and the license application. (configuration of the box from scratch).

  What is the best practice for the installation of ASA with firepower in a network?

  TAMÁS is our license what are the features will be important for me, if I want to do a total security. And how about internet proxy I think of ending my TMG Web proxy and use this ASA. I want to use the devices to its full occupancy and all the features that I needed to be activated if necessary.

  How to deal with WLC and the wireless network (which is the best practice for ASA with the firepower and WLC

  Yes maybe that's a lot, but I think many inspiring answers will knock at least with redirection to another topic or some brilliant ideas.

  Kind regards

  Christel

  @mishaal-thabet

  There is a Quick Start Guide to ASA with module power of fire services here:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  In addition, to configure your policies of Management Center of firepower to make the most effective module, I recommend the Cisco Live presentation by 2015: "BRKSEC-2018 migration ASA IPS and CX to firepower." You don't have to worry about the title, it's a good overview for most use cases.

  It can be found here:

  https://www.ciscolive.com/online/connect/sessionDetail.WW?SESSION_ID=836...

  The WLC interact with the ASA directly but the placement of your controller and you use anchor and host controllers can play in your ASA interface design (i.e. comments in an area controllers demilitarized). Other than that, Wireless subnets are just part of the variable "$HOME_NET" located on the module of firepower.

  I hope this helps.

• Power of fire time SYN with Firesight

  Dear,

  My fire power is not synchronized with system for time firesight, firesight is synchronized with an ntp server but firepower is not synchronized, how I can set the clock/NTP in firepower.as I know initial installation, we get an option ntp but now the power of fire is already set up and I get no CLI option to configure NTP

  Thank you

  Adam,

  Allow you to control the 99% of a module of firepower (on SAA) Management Center of firepower (new name for FireSIGHT Management Center for the defence of AKA) or stand-alone unit does, including the definition of the NTP server.

  As indicated in the document, create or modify a strategy of firepower to define time synchronization settings. Save it and deploy it to your devices and they will be updated with this policy.

  See the following screenshot of the example (open in a new tab to zoom in):

  Policy setting Module of firepower to NTP

  

• OpenDNS to power of fire included?

  Hello

  can you please give a clue if OpenDNS feature is included in the software Cisco firepower? Or in other words: does make sense to have the internet to inspect with SourceFire and also configured OpenDNS feature traffic?

  Thank you in advance!

  Kind regards

  David

  Hello David,.

  OpenDNS will certainly help us in our environment. OpenDNS will block all CnC, Malcious, bad reputation, known bad research. This intelligence is based on OpenDNS intelligence and intelligence added via Cisco TALOS, AMP ThreatGrid, etc.

  This helps us in 2 ways,

  1. block all traffic, any port, any protocol, North-South and East-West (not all traffic will be inspected by the power of fire, we would need IPS/IDS spread across network devices).
  2. If the traffic is getting inspected by the power of fire, OpenDNS can mitigate a known threat before that firepower get traffic for inspection

  I hope this helps.

  Kind regards

  Guillaume

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• Installation of the power of fire

  Hey everybody

  I also ordered the firepower for my 5555-X and recived an SSD and a number of PAK.

  I think I heard somewhere that I need two 120SSD disks, I have one. Is this enough?

  And what is the correct order:

  1 stop/uninstall old IPS

  2. Insert the SSD

  3 reload

  4. install the power of fire

  Thanx

  J.

  5555-X is designed to be used with two SSDS in a RAID 1 array.

  It will work with one but will not have a RAID protection.

  (edit - corrected the Raid type to '1').

• Cisco ASA with the power of fire vs Cisco IPS Appliance

  Hello

  Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

  Thank you very much!

  Kind regards

  David

  Hello team,

  The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

  Rate of good will if this post helps you.

  Concerning
  Jetsy

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.

• How do the management interface of configuration of an ethernet interface?

  We have an ASA 5540 requiring a LAN port for failover. And the left side of the interface available only the management port. How do the management interface of configuration of an ethernet interface?

  You can disable the mode of management only on this interface to make as regualr routable port and use for other purposes, including the purposes of failover LAN database.

  On the management interface - 5510 but applies generally to the management0/0, itself including 5540

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Basic LAN failover configuration

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Rgds

  -Jorge