Power options do not work after the installation of service pack 3 for Windows XP.

Similar Questions

• Windows does not start after the installation of Service Pack 3 for Windows XP

  Hey guys I have a question I received this automatic update (Windows Service Pack 3) I am running Windows XP Media Center Version 2002, the problem I have is after installation of the update my computer guard stop and windows not not start, I had to go back to my computer to a safe point (usually before the update) and I say usually because I already tried to install this two update times with the same result.

  I hope you can help me I really need your help, I'm totally distraught and I received the update to install it but I'm afraid to install fearing that my computer will not start.

  Thank you.

  Hi Crickets1,

  1 did you receive an error during the shutdown process?

  I suggest that you refer the below Microsoft article and try the steps mentioned to do before you install Windows XP SP3.

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the installation of Service Pack 1 for Windows 7 Media Player shows more album when sorting music by genre.

  Any suggestions on how to restore this function?

  Please click the small arrow to the left of the search box, and select the icon or tile. Who help me?

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

  I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

  How do I beat successfully automatically update?
  F....

  Hi Mubarak,

  Can you please tell me the number of KB article of updated with the question?

  Take a look at the response from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

  Thank you.

• Assistance in the installation of Service Pack 3 for Windows XP

  The system is Windows XP. Need help to install or upgrade to Service Pack 3. The computer is currently using Service Pack 3

  Thank you.

  Hi Annasmith,

  Are you facing any problem to install Service Pack 3?

  As you mentioned that you have installed Service Pack 3, please check again version of Service Pack is currently installed on your computer:

  a. click Startand then click on run.

  (b) copy and Pasteor type the following command and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  To install Service Pack 3, follow this link & check if it helps:

  Steps to take before you install Windows XP Service Pack 3

  Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

  My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

  -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

  -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

  A support of top-level, software engineer, or someone who takes care of the soap operas could

  -Please provide a number of test series to test with?

  - And/or activate my series?

  - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

  I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

  I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

  Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

  No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

  Thank you!

  Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

  Therefore, it is very necessary that you are using the original installation media.

  Download the CS5 products

  If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.

  
  

  WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

  Location: /Library/Application Support / Adobe.

  It is strictly recommended to install Adobe applications using the original installation media.