power supply adapter hp 15

I would like to get a universal power supply for HP 15-p133cl, I'm trying to find the size of the power supply.  I have the voltage/amperage, but cannot find the size of the tip (within the dia, apart from the dia).

@bbshop_bass,

Hello and thanks for the display on the HP support forums.  Here is a link to the service manual for you laptop I hope this helps.

Maintenance and Service Guide

If you can't find what you are looking for here.

Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

Thanks again for posting and have a great day.

Tags: Notebooks

Similar Questions

  • Power supply adapter new satellite Pro L300-12Y

    HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

    Hello

    You can order a new adaptor AC to a Toshiba ASP in you country.
    You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

    Welcome them

  • Power Supply update

    I have an old PC on my network, the name of the product: HP Compaq 8000 Elite CMT PC, Windows 7 64-bit, Intel 2 duo E8400.  I was in charge of feeding, currently 300 watt Moose comes with the PC.

    This day and age that a 300 watt covers just the Basic, not to mention that I also intend on upgrading the graphics card to a AMD Radeon HD 6670 from the Intel on board graphics chip.

    So my question is will a CORSAIR CX series CX600 600 Watt be good.  When I started to test an on-site price said that phones could not manage this, which seemed strange.  He tried to sell me another brand, I've never heard of high and low priced 500 watts.  He said the motherboard was a custom HP and couldn't manage a universal power supply.

    I checked the size and it will fit in the case, and to my knowledge, the motherboard has to handle 600 watts if she can be one of 500 watts.  Is there anything else I should look at?

    A CX600 Corsair will work in this PC?

    I'm not particularly intelligent or gifted. I'm just very, very curious.
    Albert Einstein

    Thanks for the comments, I looked at the Tech Specs. and the only rating on exceeding 320 watts was the note.  This got me wondering from a seller I price said almost the same thing, but he said that one of 500 watts would do the job.

    So I pulled the covers and checked the motherboard, somehow it has not added HP with a motherboard in a machine oriented professional users.  Even at the time it would have been a killer knowing how business as improving and not to buy new equipment.  I scraped my fingers a little do, but find the serial number of motherboards and the manufacturer.  After a bit of searching, I find nothing say that the motherboard could not handle a higher load.

    So I took a gamble and bought a watt Corsair CX500 (just in case the 600 watt was pushing it).  Installed without any problems, and so far all is going well, test gear shows power on the rails of the standard, so after a few tests more, I installed the graphics card.  So now, the system has a new power supply of 500 watts and a Radeon HD 6670 with 2g on the card in it and works very well.

    So much for the manual tech, I think HP more at their maximum on POWER supply adapted to the times.  The reason why I wanted to replace the power supply was so it was thought I update at the same time.  Never like throwing of older equipment which still has plenty of life in it.  It has 12G of memory, and he now has with the new power SUPPLY and a graphics card more service time.

    Thanks for your help.

  • Block of power SUPPLY or AC adapter for Satellite 1130-z24

    I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 laptop.

    He came without a power SUPPLY or charger power.

    Apart from Toshiba own PSU, can I use a universal laptop charger which is compatible with other Toshiba laptops?

    SATELLITE 1130-z24 will cap size similar to that used on other Toshiba laptops.

    Hello

    As far as I know the universal AC adapter part number: PA3165E - 100-240V AC, 50-60 Hz, 75W with DC 19V output would be compatible.

    Just Google for certain online offerings.

    See you soon

  • adapter power supply for laptop DV6 1230us

    Anyone know what the output current should be for a DV6 1230us laptop power adapter?

    The original power supply has failed and has been eliminated - now, we tried two adapters purchased off ebay, and both overheated.  They were the two 60w and spec'd 3.5 released.  They were the two brands not HP.

    The specifications are not available on the HP Web site, and it seems that the good spare HP P/N 693711-001.

    We would like to undestand if power supply is incorrect and the origin of the problem, or if there is something wrong with the laptop (which continues to work very well...)

    It should be at least 65 Watts (18.5V x 3. 5), but you can use a 90w like this template:

    http://www.eBay.com/ITM/original-OEM-genuine-HP-Compaq-laptop-power-cord-adapter-608428-001-609940-001-/181304904317

    The models v and 19v 18.5 seem interchangeable, as long as it's the big gun with the centering on the inside PIN. An adapter low power will heat up.

  • Get an error "the AC power adapter type cannot be determined" lack of the power supply or laptop AC adapter/Power Supply / load disconnected

    * Original title: error when the Power AC Adapter (DA130PE1-100) is unable to connect to the DELL laptop

    Hello

    I use the operating system Windows 7 Home Premium 64 - bit with the i5-2450 M CPU @2.50 GHz. Intel processor recently passed 1 month, I noticed an error in the laptop lacks the power supply or laptop AC adapter/Power Supply / load disconnected

    Can you please let us know why the error is the filler and help us solve the problem.

    I have the DELL AC/DC adapter model number (DA130PE1-100) CN-0ju012-48661-22B-6WRV-A06

    Thank you

    Kalyan

    Kalyan,

    This could be hardware related.

    I suggest you to contact Dell Support and check if there is no hardware problem.

    Please update with the State.

  • Pavelion in 500-220: new power supply and adapter installation

    Hello
    First name of the pc is pavelion 500-220 Indiana
    I want to upgrade with a graphics card called gtx 960 link below

    http://www.Amazon.com/GP/AW/d/B00T4BWGBM/ref=mp_s_a_1_4?QID=1427908571&SR=8-4&Pi=AC_SX110_SY165_QL70...

    Or
    http://www.Amazon.com/GP/AW/d/B00SC6HAS4/ref=mp_s_a_1_1?QID=1427908571&SR=8-1&keywords=GTX+960&dpPl=...

    That one fits perfectly?

    Second thing suggest me a psu at least 400 w, which can support this card and fits into my bench.

    Please answer this please...

    Hello

    Look for the Corsair CX500, CX600 or CS550m.  These PSUS have the same dimensions as your power supply.

    Consult this publication of the article.  Open your PC and make a few measurements.

  • Power supply selection guide

    This MOD can make a post-IT.

    Here is a general guide on how to select a power supply for your HP desktop computer.  The majority of the standard ATX power supply (PSU) must fit in an envelope of HP.  The exception would be a slim casing or the esoteric Merle.

    Looking for a certification 80 + on the PSU to save electricity.  A PC is normally idle or operate at low load 75% of the time.  Therefore, to find a power supply which is more effective in the range 50 - 90W.  A power supply 80 + 350W reaches the level of efficiency of 80% at the exit of 70W (20% of rated output).  The output must be greater than 140W to achieve the same level of efficiency of a PSU of 700W 80 + equivalent.  So choose a power supply that is rated at 25% more than the maximum load of the ACTUAL spending of the rig you will save more of $ on electricity.

    A modern PSU is designed to achieve maximum efficiency between 20 and 80% of the nominal power.  Running a power supply above 80% charge level will result in excessive heat, noise and premature failure.

    A platform Nvidia GeForce GTX 280 (1024 MB of RAM) will rely on 350W max to the wall.  Taking into account the effectiveness of a block of power SUPPLY 80 +, the actual load on the power supply is only 280W (350 x 0.80).  To calculate the required power supply, multiply the actual load by 1.25 (25% margin).  In this case we only need a PSU 350W (280 x 1.25) to run this GPU.

    Let's apply what we know of a rigging of Radeon HD 4870 (512 MB RAM).  290W max to the wall.  Actual load is 290W x 0.80 or 230W.  Now, apply the 25% margin rule and we come to a requirement of 290W PSU (230W x 1.25).  Even if we apply a safety margin of 50%, the power required is always under 350W (230W x 1.50).

    There are no overspec need the power supply by 50%, unless you run your PC up 24/7.  Don't forget that there is a huge variation in the quality of the PSU and side.  Maybe a good 500W PSU is not able to provide as much energy as a quality 350W.  Antec Earthwatts/NeoPower/TruePower and Corsair Seasonic are widely available at several American retailers of quality units.

    High-end power supplies number will need additional power supply PSU in the form of one or two 6/8 pin plug GPU.  You can buy an adapter to convert a molex 4pin to plug 6-pin power of GPUS.

    http://www.TomsHardware.com/reviews/GeForce-Radeon-power, 2122 - 3.html

    Hi Nautsj,

    You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

    1. technical characteristics
    2. the total power - important
    3. amperage 12 + v - important
    4 modular - is not required, but I like the flexibility
    5. guarantee
    6 i7 and SLI ready
    7. energy efficiency
    8 cost
    9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
    10. a single + 12 volt rail is a better choice.

    www.Newegg.com has many choices of power supplies. Corsair, OCZ, Rosewill, Thermaltake...

    The typical EVGA GTX 570 in 9 "long.  The adjacent slot on the PCI-E x 16 slot must be vacant.  Open your PC and do some measures so that you know for sure if the card fits.  According to me, it will fit.

    For what is a PSU, Corsair CX600has very little growth, but the Corsair HX650gives you plenty of space to grow.

    I use the HX650 in two PC.  It is a modular model in order to have better options with the selection of cable.

    "How-to" HP articles should be useful.

    TIP: When installing the power supply, unlock the scanner and slide it forward to facilitate the removal and installation of the new power supply.

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • Power supply for my P7-1410 with 16 GB of RAM

    Hello

    I installed my new GEFORCE GTX650 video card in my HP Pavilion P7 1410 with 16 GB of RAM.  Is it my PC to handle the EVGA-SuperNOVA NEX750B 750W power supply?  Is this too much for this model?

    Thank you

    WND

    Hello

    You may need to use a shoehorn so he can adapt.  The physical dimensions of a standard power SUPPLY HP block is 5,9 "x5.5"x3.4. The Corsair CX600 or CX500 would be better physical shape.  Some of the older PC HP lights with blocks of power more than 650 watts.

  • Z640: Upgraded the video card to 1070 GTX. I have to upgrade power supply?

    My Z640 has a supply of poer 925w but the power plug 6 pins only I think remaining is not enough to feed my 1070 GTX video card in use heavt. It requires care supply 2 x 8 pins and adapter I installed is not always able to provide enough power. HP chat support wasn't any help. Do I need to install a new power supply that provides power sheets 8 pin pci-e?

    @MacTheSteve, welcome to the forum.

    This is Service and Maintenance Guide for the workstation.

    I contacted StarTech to see if they would have an adapter 'Y' which had two 8-pin power connectors.  However, those that they should be the following on your motherboard or the power supply:

    StarTech Brandon: basically, there are 4 SATA power or LP4 molex.

    I believe that your diet is enough power, but simply do not have the required connectors.  At least, I don't the seen on the diagram of the motherboard.  It seems that you need to upgrade the PSU.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Satellite U500 - 11 C - power supply unit not detected

    Hello

    on my Satellite U500 - 11 C, the power supply is no longer recognizes (the rest green LED turns off when I plug)

    I tested my diet and it's OK

    I disassemble my laptop to check the connector and the power is OK of the external connector to the connector on the motherboard.

    with my battery, the computer works normally (but the battery is not more)

    You have an idea on how to solve this problem?
    What can I check?

    > Do you have an idea on how to fix this?
    If the battery and the mains adapter are ok, while a single problem can cause this: faulty motherboard.
    Maybe there is something wrong with the electronic power supply on the motherboard.

    Of course this is only my personal opinion, but I put t see any other reason for that

  • Satellite x 200 battery or power supply issues

    I have a satellite x 200 - s20. Owner since new, 2 and a half years.
    The laptop works perfectly, but I don't know if I need a new battery, power or maybe there is a hardware problem (but I doubt it).

    When it is connected to the power outlet, provide the following happpens:

    He started using the battery instead of the power supply.
    Power and battery leds turn on and turn off (on during a few seconds and then off for a few seconds).
    At this point, the battery stops charging.

    In the manual it mentions something on one of the lights turn blue, none have ever done that.

    Hope someone can advise
    Thank you
    Strand

    Hello

    In my opinion, you should first check if the power adapter is not a malfunction.
    If the AC adapter would work properly, then the battery might not be charged and the battery led not turn to blue because the battery is not fully charged.

    I would recommend so check the AC adaptor first.
    Of course this is only my personal opinion and I could be wrong too

  • With Tecra750DVD power supply problem

    My laptop recently decided to refuse to turn on when I turned on. There is a yellow light in the position of "power" over the front of the machine, but it won't start. I tried all the options: Power Supply Unit only, only battery, Power Supply Unit + battery and nothing works. Fuse is good in the plug of power supply. Battery is less than 12 months.

    Hello

    You can remove the battery completely when problemshooting this kind of predicament.

    First of all - what impression the power button? Does it feel as it should? Refers to how it used to feel? If this is not the case, check if there is an active "lock" behind it.

    Some models have a safety lock to keep the machine from accidentally start in a bag or two.
    Please look at the LED that indicates that your adapter is connected. When you try to switch the machine on, what is happening with this LED? Always the same fixed green light or suddenly out or flashing?
    If out, please try to get your hands on another adapter (borrow prefferably). If it flashes then try to remove the AC adapter, remove any option that can be easily removed, CD/DVD, memory, expansion card PC and so on.
    Try to restart it (remember to join HQ again). Even? If Yes, then sorry to say I think that your machine needs service. If this isn't the case, then there could be hope.

    Disconnect the AC and put back in place the units that you have deleted before, one by one and after each unit, try to restart the machine.
    If it starts fine, remove the unit and reconnect the next unit. Perhaps you will find that there is a problem with an external device (memory, CD, PC Card and so on), then at least you can continue working more or less as before the problem.

    Good luck

    Tom

  • POWER supply upgrade

    I'm buy a GTX 660 Performance Edition and replace my GTS 250, so I need to buy a new power supply or I do?

    I used a simulator of power on Newegg http://images10.newegg.com/BizIntell/tool/psucalc/index.html

    and I'm 11 Watts is more than OK? I strongly believe not, but I would like a second opinion and explanation of the consequences.

    Also I just found out that my current settup is 24Watts on yet I'm running OK I guess. PSU reached the high celsius of 60 s at full load.

    I was looking around power supplies, but the few I found in my price range do not have the same dimension that my current has.

    The main thing I need to know is where can I buy compatible power supply for my HP Pavilion Elite m9277.uk, a desktop PC?

    I would really appreciate an exact PSU for 500-600 w to €60 or less.

    My specs:

    http://support.HP.com/us-en/document/c01469326

    I changed the 9800GT for GTS 250 1 GB GPU and I am upgrading again for a GTX 660.

    I have also excluded the tunner TV my PCI slot and no longer using HP removable HARD disc if Bay that makes a difference.

    Thanks for reading my long comment, I think I've met as a beginner, but bare with me, I'm not.

    It's like buying a car.  You pay the best features you get. Those you have posted is OK, a little low. The wattage is actually a trick few because a grade A 500w will in fact on most power cleanser in conditions normal operation than a budget model. Bonds, for example, put the better energy at higher temperatures. Any food you get these days will have the connectors you need. And in any case you can use a standard molex plug for power to the video card video cards usually have an adapter in the box. I personally like modular PSUs because that basically custom, you can do the installation and power cables that you actually need. None of the above are modular.  Modular costs a little more. The connector you want to be sure to have is the power of 6-pin pci-e. They have all taken P4 auxiliary these days. The first that you shown above has a list of connectors and I can confirm that it has everything that you will need.

    And the industry standard power supplies... ATX is a power of a specific size, and they should be inter changeable. Just to be sure, however, to measure the old and compare to the new dimensions. I've updated the power supply in this unit, and he was able to use the industry standard ATX power supply.

Maybe you are looking for

  • Bugs on iBooks - name PDF changes do not

    The problem is that the name of the PDF in iBooks did not change after that I did these two steps: 1. change the name by pressing select and then the title of the PDF file. 2. turn off the application iBooks multitasking (the screen after two double

  • HP Envy 15 laptop: cannot disable secure boot

    I want to install Linux.  Windows 8.1 is a horrible operating system for a computer. I need to disable startup secure in the BIOS. I have the BIOS verion F.42 since March 2015. CAN I change the simple options such as the time of the machine. But if I

  • Remove windows McAfee internet security

    I am trying to remove McAfee internet security to replace by a freebee from my internet provider (Rogers)but all I get is a message of uninstallation and a white box in the middle of my screen that won't go awaycan anyone help.

  • my internet explore keeps closing when I use a link,

    my internet explore keeps closing after 2 a time to opening a link, im running windows 7 64 bit

  • the habit of 8600 911g copy or new color scanning machine last firmware and software

    I recently purchasded this machine and have discovered that copying or scanning in color does not work when scanning the computer or the printer There is no Windows 7 64-bit operating system error message check all the settings on the computer and th