PowerCenter session ends, the workflow ends much later.

Similar Questions

• Send an email at the end of the workflow

  Hi, I need to send and email at the end of the workflow, how can I do this? destinatary address is an entry workflow...

  Thank you

  You can use the workflow 'Send Notification' under the Mail folder. You need to set the appropriate parameters for the mail server and port, but there are some good examples in the Mail\Example Interaction with Email workflow.

  Hope this helps

• View 4.5 connect the session ends on the WAN access

  I saw 4.5 upwards and running, although I ran into a problem with connectivity from outside the network.

  I the installation of server Connection View and forwarded ports 80 and 443 to view connect server inside - it's a temporary facility until we run all over SSL VPN.

  I can reach the server, download the client, connect, but when he tries to establish the session on the desktop, it disconnects.  Newspapers the for the user login and logoff, as a the packet capture poster that my outside client ends the SSL connection after trying to connect.  This behavior is the same with the RDP PCoIP protocols.

  My question is: view you must install a server security for external connections, am I missing a port for PCoIP / RDP, or something in the roads is bad?

  I guess it depends on how if you use direct connect to this broker for connections.  If you use directly connect you must put at the disposal of the 3389 of VDI machines to the customer outside. If you are tunneling by this broker for connections, then it should work except PCOIP.   If I'm not mistaken PCOIP uses the direct connect method constantly.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• Question when the workflow started the same session

  Hello world
  I'm having a weird problem. When I start the workflow for the first time, it is stuck at a certain "Activity A" activity with a status of 'Active'. When I start the workflow from the same session for the second transaction, the first transaction is completed and the other is still stuck in the same activity. It continues when I start the workflow from the same session.
  
  But when I close this session, the last transaction of this session is permanantly stuck to the activity with a status of 'Active'.
  
  When I open another session and submit the first transaction, once again the same pattern repeats itself.
  
  
  The code of the activity where it gets stuck is:
  PROCEDURE PROCESS_REQUEST_SUBMIT (itemtype in varchar2,
  ItemKey in varchar2,
  actid number,
  funcmode in varchar2,
  Out out result NOCOPY varchar2)
  IS
  l_sundry_listing_number varchar2 (30);
  number of l_approval_sequence;
  l_action_by varchar2 (240);
  l_count number;
  BEGIN
  
  
  
  l_sundry_listing_number: = wf_engine.getitemattrtext(itemtype,itemkey,'TRANSACTION_ID');
  
  Select count (*) in the XXCED_SUNDRY_WF_ACTION_HIST l_count
  where sundry_listing_number = l_sundry_listing_number;
  
  If l_count = 0 then
  l_approval_sequence: = 0;
  on the other
  Select max (approval_sequence) in the l_approval_sequence of XXCED_SUNDRY_WF_ACTION_HIST
  where sundry_listing_number = l_sundry_listing_number;
  l_approval_sequence: = l_approval_sequence + 1;
  end if;
  
  l_action_by: = wf_engine.getitemattrtext(itemtype,itemkey,'REQUESTOR_NAME');
  
  INSERT INTO XXCED_SUNDRY_WF_ACTION_HIST
  (SUNDRY_LISTING_NUMBER,
  APPROVAL_SEQUENCE,
  ACTION_BY,
  ACTION,
  ACTION_DATE
  )
  VALUES
  (l_sundry_listing_number,
  l_approval_sequence,
  l_action_by,
  "Submit."
  TO_CHAR (sysdate, "DD-MON-YY HH24:MI:SS)
  );
  
  COMMIT;
  
  
  
  END PROCESS_REQUEST_SUBMIT;
  
  
  Can someone help me with this problem please?
  
  
  Thank you
  Rambeau

  Hello

  So that the workflow must be started correctly, something MUST validate the transaction - be it in your procedure that starts the workflow, or anything that calls this procedure. If there is no commit, then when the session disconnects, it restores the workflow.

  So, try

  begin
  XXCED_APWFL006_SUNDRYAPPR_PKG.Initiate_Workflow(transaction_id=>'SUNDRY-0001',
  requestor=>'AMBALAR');
  COMMIT;
  end; 
  

  SQL * more and see what the results are. If it works, the problem is within your call to call the workflow without a validation process.

  Matt

  Published by: Darryl Burke - advertising and deleted links

• Session ends not with StructClear function

  Normally, if you want to delete a session we do with StructClear function. But I don't see that it does not end in a user session because the same CFID and CFTOKEN values exist once we've cleared a session. This means so that it is not really ends a session. right?. But if we are expiring these cookies (CFID and CFTOKEN) values then we can see new values for these cookie variables. Here force us coldfusion to new values for these variables cookie but actaually there neither expired nor onSessionEnd() handler has been invoked.

  So my question is how effectively ends the session. But it won't work if we use StructClear function because it erases a logical business identifier as reported in your business logic.

  Anyone have any ideas on that.

  Suppose that you set your session timeout to 2 minutes.

  When you visit the page, you start a new session, CF generates a CFID/CFToken and SENDS that back to you in response to your first request.

  When you visit a page before the session, your browser sends the CFID/CFToken with demand, CF sees this, check the this is a live session and does not issue you a new.

  If you wait 2 minutes of a session timeout, CF kills the session, but not FACT NOT to MESS with your Cookies.  It doesn't matter, because they are invalid anyway.

  When you make a request, you send the CFID/CFToken now old, CF sees that it is not correlated to a live Session and generates a new CFID/CFToken it sends to you now and you update the cookies with the new values.

  A session expires on the server is NOT because ColdFusion deletes the cookies from the user's browser.  It States only that "for this combination CFID/CFToken, the session no longer exists, so let me generate a NEW session for you and send you it is CFID/CFToken to correlate your visitor to the new SESSION scope.

  In the meantime the timeout and check your cookies should show the last cookies you had when you request.  Nothing new.

  In your onSessionEnd() method, it will BE the old values because when the session expires, this method gets a COPY of the scope SESSION and APPLICATION, (the SESSION just expired) and it's the old data CFID/CFToken.  CF performs as one might expect.  What you trying to do?  I think that the problem here is that you don't understand how work sessions.

  A SESSION that CF is when he takes a cookie CFIF/CFToken provided the user request and checks to see if it is valid.  If so, then all the variables stored in the SESSION scope are made available for the processing of this application.  These cookies act as a means of your browser, say who they are.  By default, Session values are stored in RAM.

  When you do not apply for an amount of time specified in the THIS.sessionTimeout value, CF mess with cookies on your computer.  He says simply.  "Hey, these variables that I wanted for the SESSION which was for CE CFID and CFToken THIS, well, delete them.  The session has expired.  The browser will not see anything different either until he makes another request.

  When you make a request, once again, your browser provides CF CFID and CFToken cookies, but this time CF says ' Hey, that the session has expired, so I'll make a new one for you (lights off the coast of the onSessionStart() method) and he referred to a new CFID and CFToken cookie to the user who now matches the new session.»  A session that will stay alive as long as the user makes requests in the specified time-out period.

  If you have deleted your cookies, the SESSION would still be ALIVE, but it would simply be inaccessible, and after the time-out value, SEE it would expire.  But if you have deleted your cookies, to present a request to the server, we're no. CFID/CFToken cookies sent, so CF would create a new session for you and will send you a new CFID/CFToken.

• Is there a Session end function in Cold Fusion?

  In .net, there is a session end function that allows you to perform functions end a user session, Cold Fusion has something like that? The reason I ask is that I have a user that generates several xml with the data files and stores them on the hard drive while they are visiting the site, but once they leave, I submit all of these xml in a database files and trying to figure out the best way to do it. It would be for multiple users on the site. Anyone have any ideas?

  Thanks, I guess I can do it. I never did a planned before work, but it does not seem too difficult to install. Thank you.

• Session by the issue of the user

  Hello

  In my current setup of workflow, I have an end user choose their vDC and VAPP model.  From there on, I launch the model and once finished I a user interaction, to accept or refuse the workflow and add what networks to attach the VAPP to.  This interaction is accepted by a group of operations (different from the end user).  This is I meet variables not passed back and forth between the user input different.  Is there a way to make it work on a configuration of Session by the user?

  Thank you

  Mike

  OK, you get close.

  I just did the wf to test this situation. Networkid = always to "#vmNetwork1.id" does not work.

  Create an action that returns the id as follows:

  

  Now default Networkid like this:

  

  (your path of action / parameter name / past will probably be different, please adapt)

  If it works properly your interaction with the user will look like that.

  

  The box containing a script with the code:

  var vcdHost = app.getHost();
   prodvAPPNetwork = vcdHost.getEntityById(VclFinderType.ORG_NETWORK, networkId);
   System.log(prodvAPPNetwork);                // I get Null
   System.log(networkId);                           // I get #vmNetwork1.id
  

  Runs well and gives:

  [15:39:38.365 2012-08-17] [I] DynamicWrapper (Instance): [VclOrgNetwork]-[class com.vmware.vmo.plugin.vcloud.model.OrgNetwork] - VALUE: com.vmware.vmo.plugin.vcloud.model.OrgNetwork@39fdb480
  [15:39:38.366 2012-08-17] [I] urn: vcloud:network:66812df3 - 3990-4 d 67-8e87-781eca0faf01

  Christophe.

• Action to get SQL DB data in the workflow presentation

  Hi all

  I'm trying to create an action, where I read the data in a SQL database and presented this as (predefined items list) in the presentation of my work.

  I have a DB table with names, and I will introduce this name as a list of selected on my display of web pages in my workflow.

  I have a workflow where my client needs to select an approver of costcenter and I have all the approvers costcenter in my SQLDB.

  I know I can create "Pre-defined answers" with this name, but that I need to manage the DB and the workflow tables and I manage only the DB.

  Any who have already done this?

  At this point, you should have a list of the columns / rows when you use the plugin object as input. If you must have a fall down then you must either create an action using this object as input and returns an array of string and use it in a field of string entry to a property of the preset list.

  I don't know if the plugin SQL has the option to display values in drop down without making such a transformation in action.

  You can try it with the download here: http://www.vmware.com/products/datacenter-virtualization/vcenter-orchestrator/plugins.html

  It may end up to be much easier to maintain. I mentioned the plugin DB personalized because that's what I've used before and héLas had no chance to work again with the plugin SQL.

  Christophe.

• How to jump the popup to display the workflow control?

  Since we found that the logon session can be maintained correctly, and workflow control screen can not be popped up after several series of operations as "a new pop - up workflow control window".
  
  Our workaround, is that... to convince the user to close the review workflow each time at the end, and this may cause inconvenience. Some users have complained.
  
  
  Could an expert please how I can work around advice?

  IndiFailure wrote:
  Since we found that the logon session can be maintained correctly, and workflow control screen can not be popped up after several series of operations as "a new pop - up workflow control window".

  Our workaround, is that... to convince the user to close the review workflow each time at the end, and this may cause inconvenience. Some users have complained.

  Could an expert please how I can work around advice?

  As expected from the point of view of Content Server. The review of the Workflow page will always open in a new tab/window when click on "review of workflow" under the actions button.
  You can only claim an improvement to initiate the development of oracle.

• I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers avecjo

  I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers with no problems. But the 3rd computer begins to complain that there cannot be a genuine version. I need some advice please.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Software not valid https://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• Rest of the Workflow Service API now

  I have a workflow that works perfectly in vRO 6.0.3.  I migrated the workflow to vRO 7 and I get this error when running: not supported the value of the header: accept = * / * I'm defining the header with this command

  request.setHeader ("Accept", "application/json");

  Here is the complete answer

  |  'attribute': name = error code type = string value =

  |  'attribute': name = restOperation type = value REMAINS: RESTOperation = "d18034f6-cdd2-484e-bfbd-752ac1274f3d:7f70ca66-6c2f-4353-bcad-e96843fbd2fc" dunes://service.dunes.ch/CustomSDKObject?id= & dunesName = ' REST: RESTOperation.

  |  'attribute': name = statusCodeAttribute type = numeric value = 400

  |  'attribute': name = hostResource type = value ResourceElement = dunes://service.dunes.ch/ResourceElement?id= "0dc69f5c-e39e-49a8-bd65-9cbd6bda9b2d" & dunesName = "ResourceElement".

  |  "output": name = statusCode type = numeric value = 400

  |  "output": name = contentLength type = numeric value = 232

  |  "output": name = bots = properties value=#[#Snapi-Request-Id#=#string#a288deff-68d3-48b6-8478-d841c53bc001#+#Strict-Transport-Security#=#string#max-age=15768000; includeSubDomains;#+#Server#=#string#gunicorn/19.3.0#+#X-Cnection#=#string#close#+#Set-Cookie#=#string#JSESSIONID=C2C4D02AB5F1042977303385B65B0EC2; Guarantee; Path = /; HttpOnly, BIGipServerpool_disney is 1400914186.41278.0000; [Path = / #+ #Content-length #= #string #232 #+ #Date #= #string #Sun, February 28, 2016 03:27:23 GMT #+ #Content-Type #= #string #application / json #] #.

  |  "exit": name = contentAsString type = string value = {'error': {'message': "not supported the value of the header: accept = * / * ',' detail": "not supported the value of the header: accept = * / * check error logs trace or enable the glide.rest.debug property check processing demand REMAINS" "}, 'status':"fail"}

  |  "output": name = type of numbers = Array/string value = #{#} #.

  |  ["output": name = output type = string value =]

  |  "exit": name = type of results = string value = {'error': {'message': "not supported the value of the header: accept = * / * ',' detail": "not supported the value of the header: accept = * / * check error logs trace or enable the glide.rest.debug property check processing demand REMAINS" "}, 'status':"fail"}

  |  "no entries".

  End of the execution stack.

  Someone at - he seen elsewhere and not a clue?

  There was a bug in header processing logic that is fixed in the latest plugin versions and will be available with the upcoming vRO 7.0.1 version.

  A quick fix would be to change the line set to your header (note the lower case 'a' accepts):

  request.setHeader("accept","application/json");
  

• Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

  Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

  I tend to use after correcting the highlights, shadows, brightness, clarity and contrast may be. In the latest versions of LR you can simply double-click on the word white and black all in now the SHIFT key. Which will automatically define the ends of the histogram. It works fine most of the time, but sometimes I need to go back a little off.

  See this tutorial:

  https://www.YouTube.com/watch?v=_lRkB7oGl80

• Entry to the workflow multiline string

  I'm working on integration with FortiManager via SOAP plugin vCO 5.1. One of my steps will be to install/run a script from several line like this:

  # Set FortiAnalyzer
  config log fortianalyzer setting
  set status enable
  set server xxx.xxx.xxx.xxx
  set localid FGT60Dxxxxxxx
  set upload-option realtime
  set reliable enable
  end
  

  Ideally, the workflow would be take in a block of text, assign to a variable, then who has inserted properly in the SOAP call.

  Is it feasible or possible?

  Of course, simply choose "Enter multiline text" for the input string to get several lines