View 4.5 connect the session ends on the WAN access

Similar Questions

• Droid Turbo could not connect the Cisco access point

  Greetings.

  Since the upgrade to a droid turbo, I was unable to connect to the network without wire of my work. I work in the it Department, but my experience with Cisco technologies and wireless is limited, so I tried to understand why. My previous bike x worked fine. We have a network of all the access points managed by a controller Cisco 4402 running version 7.0.98 of the BONES. I was able to connect to another wireless network that I could meet outside of work, and I am able to connect to the network of my work if I connect it is unsecured guest SSID. Only connections to our 4 secure networks fail. The controller reports that my phone cannot all simply to authenticate. The controller is configured for WPA2 / AES using a key 284 on the particular network, that I am trying to connect. I entered this key manually both via copy and paste. As far as my phone goes, I only tried to withdraw and time networks like tent to start it in safe mode without success. I read on various forums android that maybe it's a problem related to Kit Kat and this kind of problem has appeared on other handsets from other manufacturers, but nothing definite.

  Any suggestions would be much appreciated.

  -Josh

  Let me direct you to two other discussions here on the Droid Turbo forum and the other from Cisco which may help.

  Unable to connect to company wifi

  https://forums.Motorola.com/posts/af633eb3e4

  DROID WiFi Turbo questions

  https://forums.Motorola.com/posts/06a2f3c5ca

  Connectivity issues with Cisco and Moto X (Gen 2) allowed RMC controllers (probably related)

  https://supportforums.Cisco.com/discussion/12331486/connectivity-issues-Cisco-controllers-and-PMF-enabled-Moto-x-Gen-2

  I hope this helps!

• After running Thinkvantage System Update, unable to connect the wireless access point

  I've recently performed Thinkvantage System update for updating various programs/drivers on my T61p.  I've updated the V5.12 access connections.  In addition to this I was required to update driver V1.52 power management and functionality of the shortcut key for

  V2.10.0002 (two of them were the most recent available).

  After these updates, I can connect is no longer to any access point wireless that worked before this update.  I have tried to reinstall earlier versions of Access Connections, but still couldn't connect to wireless access points.

  ANY help would be appreciated.

  OK, problem solved.  I found that when I ran last weekend system update downloaded and installed an incorrect driver for my wireless hardware.  I installed the correct driver and now the connection to a wireless access point works.

  Certainly, I don't understand how/why not update system would be to download and install an incorrect driver.  VERY FRUSTRANT and TEDIOUS!

• Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside

  Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside the Jquery page. In the future I would also be able to add, to remove the DB records. Any help, tutorial... Thanks TG

  I would like to connect with the database instead of "writing" all the tables in the bearings inside the Jquery page

  This is usually done with a CMS (content management system). There are commercial products CMS like WordPress, Joomla and perch. You create one or several layouts and then create pages of these page layouts using the CMS. In this way, it is possible to have hundreds of pages, each with unique content, but a page layout that can be managed in a place of sharing.

  CMSs on shelf don't require programming skills. Otherwise, some of us write our own CMS with custom functions, but this requires back-end, as with PHP programming.

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• 4215 Java error: when connecting the IPS Event Viewer

  Hello-

  I got a java error trying to connect to my 4215 with Cisco IPS event viewer. It's as follows:

  IOException in Subscription() open: java.security.cert.CertificateExpiredException: NotAfter: Sunday 29 March

  The web server is running on 10.x.x.x:443? Please check the settings of the device communication.

  I can set the date on my pc to last week and everything works very much like b4. I tried to update my java to the latest version and created a new certificate of IPS.

  Any help would be greatly appreciated:

  Thank you

  Hello

  The problem can be solved by following the steps below

  1. connect the sensor.

  2. run the tls - generate the command key.

  3. make sure that the certificate is generated.

  4 Add the device again. It should work now.

  Ref: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_qanda_item09186a008025c533.shtml

  Whether she helped.

  Concerning

  Sridhar

• How to remove a schema after having connected the expdp session

  Dear Experts,

  How to remove a schema after you connect the expdp session?

  I'm not able to reach a work

  
  [oracle@orcl28 ~]$ expdp system/****  attach=SYS_EXPORT_SCHEMA_01
  
  
  Export: Release 12.1.0.1.0 - Production on Mon Jan 18 02:23:26 2016
  
  
  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.
  
  
  Connected to: Oracle Database 12c Release 12.1.0.1.0 - 64bit Production
  ORA-39002: invalid operation
  ORA-39000: bad dump file specification
  ORA-31640: unable to open dump file "/home/oracle/datapump/UREPJ.dmp" for read
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  

  You have this table in the schema of SYSTEM-SYS_EXPORT_SCHEMA_01?

  Delete this table, and then try again.

  Aman...

• Disable the auto connect the beginning and the end with brush

  Hello! This is my first post. And maybe it's a stupid problem.

  I can't find a solution online. Maybe because I don't know what it is.

  So when I triple tap and make a related on my Wacom tablet, it connects the beginning and the end as follows:
  I don't know if it's the tablet or photoshop.

  

  You aren't the only one with this problem. If you search this forum you will find others also have this problem. I don't. I've seen any solution to the problem. Ons suggestion that I've seen is to disable the double distance tap in preferences of Wacom pen.

  https://forums.Adobe.com/search.jspa?place=%2Fplaces%2F1413024&sort=updatedDesc&q=Wacom+Li not

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• Dreamweaver CS5, MySQL, PHP: Why the views are listed under the tables in connection

  Using Dreamweaver C5 on a remote server with MySQL and PHP, I notifce the opinion that I defined in the database are the list under tables in the login window, not under views. Probably does not really matter, but I was wondering if there is a way to influence this - keeping views listed separately in the tables.

  Hello

  This has to do with how MySQL stores the view in the database, (a similar problem occurs with procedures) that they are stored as part of the entire database.

  View on there own are not natively supported in dreamweaver.

  PZ

• Restricting the views to DISPLAY ONLY the rows CreatedBy current connected user

  I want to user Oracle views - restrict the view to DISPLAY ONLY the rows CreatedBy / current OwnedBy signed / authenticated user!
  
  What are the different approaches, I have something with;
  setNamedWhereClauseParam, but this must be called on each ManagedBean in the constructor, as I have now!
  This approach caused the button Edit/Save which simply calls the commit to stop working. In a complete view of all the lines, there is no problem, with
  the button requesting validation the selectedRow in af: table.
  
  Other means?
  
  Thank you

  It does not appear that your view object extends the framework with custom code extension class in dealing with populating the bind variable by default.

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• PCoIP zero client does not display an Horizon view Client user of the window for one (and only one)

  The zero client is a Samsung NC241 via Teradici Tera 2. My user has 3 virtual workstations assigned;  Current SOE with WinXP, a specific COMPUTER WinXP and a test for the upcoming Win7. When I connect the customer to see I'm automatically redirected to the WinXP for HER, without going through the window that lists usually all available virtual PC. This happens on all terminals, I tried. Other users, even if you connect to the same terminal, are given the option to select a virtual PC, even if they have the choice of a!

  I have checked the setting for the PC virtual in the Teradici PCoIP Management Console and also the settings of the user under the Horizon view VMware administrator but cannot find where my configurations user and desktop are different from those that work "correctly".

  Is someone able to propose what I'm looking for?

  TIA

  Thanks, Stu, for your input.

  I arrived on the solution after you follow through with your suggestion above. I used the client on a Windows PC, then after that record on I clicked on 'Options' in the bar of VMwareView Client session and erased the text is 'auto connect to this office. We have the option 'Enable automatic reconnection' set to false, so I'm not sure why that followed me.

  But the good news is that it worked!

• Connecting the thin client to the virtual desktop

  Guys, I'm looking to provide some knowledge of locations to my current View 4 implementation. I need essentially allow thin clients in the room for a particular virtual desktop access, but the user access to all other workstations when they are in a different room\different thin client.

  At the present time, it seems possible to connect a desktop computer to an end user and not a customer light name or address etc.

  Is there anyway that I can link a pool of funds or office to a lightweight client device so that the bureau is only launched from this location?

  Thank you

  We are able to do something like that today.  Serve us our Wyse thin client and when the thin clients boot they go to an ftp site to obtain their configuration files.  The configuration file can be modified to configure how clients view client work light linux.  So, to process your request, we would put in class A on a network that has a config file that will automatically connect to a certain pool of virtual desktops.  In all networks, they would receive a configuration file that allows them to get the menu and choose what desktop Pool to connect to.

  I don't know what light supplier customer, you have, but I'm assuming that Wyse is not the only one with a certain type of configuration like this.

• Connect the BT Home Hub 5 to Time Capsule

  Hello... I tried this search and became simply confused with how to proceed, or if it is still possible!

  I would like to time Capsule to back up an iMac and a MacBook Pro using Time Machine.  However, if possible, I would like to distribute my wifi signal of BT, as I believe that she will do better than the Home Hub itself...?  If this isn't the case, it would be good to know as well.

  If he will distribute the signal better... How can I do this?

  1. Lampholders use on the home page of Hub and TC?
  2. What I have to put in place the TC in bridge mode... If yes how?
  3. I have to turn off the wifi on the hub of the House?
  4. Must the TC be put in place to create a new network?

  Thank you in advance for the advice/help!

  1 use the WAN port on the TC and any port LAN on the HH5 to establish the connection.

  NOTE: at least until what you complete installation... Then, you can use any port on the TC. Sometimes a port LAN on the TC will then work better.

  2. Yes, you need the TC in bridge.

  When you run the utility Setup Assistant airport... and you have configured the wiring as shown in 1. Normally, it will automatically detect the setup and choose of bridge. If this isn't the case you can simply change the end of the process.

  You are more disturbing... Let it Setup to give it a try and if it does not post again.

  3.4, the default TC will always create a wireless network that is correct. Do not turn off Wi - Fi in the HH5, but you can if you wish... It is totally up to you... There is nothing wrong with the two manage the wireless network... you can even use the same name and same security setting and password on both and let the customer who join. (strongest signal) This is called roaming... normally, it is better for the TC to have a separation from the HH5... about 1 M would be nice... Even better locate the TC close to where it is needed.