PowerCli script prompts for user input

Similar Questions

• Increase the number max of entries on the prompt for user input

  Hello

  I would like to increase the number of entries beyond 10 available on the input function query the user. Right now I use 9 of the 10 entries available each operating a Subvi a box structure. I seem to be limited to 10 entries using the prompt the user for input function, so it is there another way to ask the user to choose from > 10 entries preferably 20.

  Thanks for any help

  Chris

  Chris69 wrote:

  However the converted VI (sub dialog.vi) always seems to be using the names of VI express 9 for entries

  I don't understand what you mean by that. The VI has only some (all cases 'red) wire indicators to the connector pane. You have no other wireline indicators.

  Rather than having individual terminals, you must use clusters. For example, an indicator cluster for your case of reds, a group for your green case and one cluster for the 'other' options.

  Aside: You have a comment on the "Select up to 2 cases" façade, but all your controls are independent checkboxes, so there is nothing to prevent someone from checking all the boxes. I assumed that you currently have set the size of the window so great for debugging purposes.

• "Wait for user Input" GIF

  Hello!

  I don't want to start the animation GIF automatically, loading the home page. How can I solve this: I wish that the GIF start animation when I click on the image. How can I do this?

  Where can I find the option "wait for user input" is photoshop?

  Thank you very much!

  Hello

  Greetings,

  • Whence the gif begins to play automatically, you talk about your web server where you downloaded.
  • Either way, I doubt that there is an option "in waiting for user input" in Photoshop.
    • You can create an action to do this, but then it will be effective only within Photoshop (if that's what you're looking for)
  • You can also create a script, check out these links below for more details
    • Stop the automatic playback of your Gifs
    • http://StackOverflow.com/questions/5818003/stop-a-GIF-animation-OnLoad-on-mouseover-start-l'activation

  Concerning

  Rohit

• Text input does not pause for user input

  If all goes well, a simple question:
  
  Brief:
  I have a box of text on a page of simulation of connection that do not pause for user input. Instead, it just displays as if writing be typed and then continues.
  
  Question:
  How do I get this thing to pause and wait for the user to enter the login id?
  
  Detail:
  Version 1.01.1418 (full version), platform PC of Captivate
  Text entry box
  1 entry correct listed: "sa".
  Success = continue
  Display: Rest of slide
  Break after: 0.1 sec (varied this having any impact on a break for the entry)
  No transition
  
  DRM for advice.

  This must have been a dark note somewhere in the documentation:

  You can not interact with the page if preview you with play this slide (F3). The other preview modes to the text entry area work correctly.

• Decision tree for user input

  
  I am creating a workflow that accepts a user input and I'm trying to figure out how I can take a parameter selected between an entry and the next choice of entry poplulate.  For example:

  parameters: location, area

  Location (an array of strings) New York, London, Tokyo

  Therefore, based on the chosen of the location of the field parameter change

  New York - area: Prod, Test

  London - area: Prod, Dev, Test

  Tokyo - area: Dev, Test, Eng

  Hi Shaka,

  First, you must create an action (using vCO Client Java) that accepts the rental of type string input parameter and returns an array of strings containing fields for this location.

  If the signature of the action would be something like

  Array/string getDomainListByLocation(string location)
  

  And the action script content would be something like

  if (location == "New York") {
    return ["Prod", "Test"];
  } else if (location == "London") {
    return ["Prod", "Dev", "Test"];
  } else if (location == "Tokyo") {
    return ["Dev", "Test", "Eng"];
  } else {
    return ["Unknown location"];
  }
  

  Then, create a workflow with input parameters 2 - 'rental' of type string and 'areas' of type Array/string. Go to the "Présentation" tab in the editor of vCO and assign the following properties for entries

  • 'rent' entry - adds 'Predefined answers' property and fill its value with locations - New York, London and Tokyo
  • 'areas' entry - add "Data binding" property and bind to action that you created in the first step. Thus, the value of the property must contain OGNL action call expression, something like

  GetAction("my.actions.module","getDomainListByLocation").call( #location )
  

  Now, when you run the workflow, the first entry should be rendered in a dropdown menu with locations and when you choose one of them, the data binding action will be called and the value of the second entry should be amended.

  Hope this helps,

  -Ilian

• Shoot/Get/the data value of the window for user input

  I'm trying to do something that should be simple enough for a programmer, but unfortunately, unfortunately to be a designer, I'm having a devil of a time with it.  After spending hours searching and trying different things, I thought to post the problem.  I have the feeling that I'm not the first creator of evil with it.

  I'm trying to extract a window input data and to transmit it to a variable.  In the script, I do a few purge(), and I don't know if that clears the values of input from the user during the script, but it's thinking ahead...

  I need the values to:

  Layer.translate (X, Y) / / if I'm wrong, it must be not - string

  bitsaveoptions. Method = ChanelScreen; in menu drop-down

  bitsaveoptions.angle = KAngle / / if I am mistaken, this must not be one - integer

  bitsaveoptions. Frequency = ChanelFrequency; If I am mistaken, this must not be one - integer

  bitsaveoptions. Resolution = ChanelResolution; If I am mistaken, this must not be one - integer

  bitsaveoptions. Shape = BitmapHalfToneType.ROUND; in menu drop-down

  I know that there are different ways to retrieve data from a window how .value, and perhaps others, but I can't seem to extract the data from user input

  Any advice would be greatly appreciated.

  Thank you.

  PS I work with Photoshop CS5

  That's what I have so far.

  = Ruler with millimeters

  app.preferences.rulerUnits = Units.MM;

  var doc = app.activeDocument;

  var layer = doc.activeLayer;

  var dropdownlistArray = new Array(); / / the table of drop-down lists.

  var chosen_action = null;

  var ScreenShapeArray = new Array)

  "Round."

  "Elliptical".

  );

  var WinContent =

  "dialog box {------}.

  orientation: 'column ', \

  alignChildren: ['fill', 'top'],

  preferredSize: 300 (130) and \.

  text: "Export settings"------

  margins: 15,.

  \

  Coordinates: Panel {------}

  orientation: 'column ', \

  text: "Quarters of channels,"------

  margins: 15,.

  alignChildren: 'right ', \

  KChanelX: Group {------}

  St: StaticText {text: 'X:'}, \

  you: EditText {text: '15', characters: 4, justify: 'just'} \

  ST2: StaticText {text: 'mm'}, \

  } \

  KChanelY: Group {------}

  St: StaticText {text: 'Y'}, \

  you: EditText {text: ' 10', characters: 4, justify: 'just'} \

  ST2: StaticText {text: 'mm'}, \

  }\

  }\

  bottomGroup: Group {------}

  cancelButton: button {text: 'Cancel', properties: {name: 'Cancel'}, size: [120,24], alignment: ['right', 'Center']},

  applyButton: button {text: 'Apply', properties: {name: 'ok'}, size: [120,24], alignment: ['right', 'Center']},

  }\

  }"

  = Create object window

  var win = new Window (WinContent);

  = Display window

  Win.Show ();

  var X = parseInt (win. Coordinates.KChanelX.te.selection);

  var Y = parseInt (win. Coordinates.KChanelY.te.selection);

  alert (X); Here I get NaN

  alert (Y); Here I get NaN

  If (typeof (X) = 'undefined' | typeof (Y) = "undefined") {}

  Layer.translate (X + "mm", "-" + Y + "mm");

  } else {}

  Alert ("here"); Always end - up here regardles of canling or accept the default values

  };

  You don't have a selection in an edittext field. Like c.pfaffenbichler said - you get your X and your Y's

  var X = win.Coordinates.KChanelX.te.text;
  

  and so on:

  var X = parseInt(win.Coordinates.KChanelX.te.text); // or
  var X = Number(win.Coordinates.KChanelX.te.text);
  

  Have fun

• State machine - waiting for user input before going to the next State

  Hello

  I based on the example of standard state machine and would like some advice on how I can prevent labview in the next state until a user clicks a button.

  for example, the current state is 1, it runs through its code and its about to happen at the end, therefore, enter the following State, based on the defined constant "then of States." There are only two choices on how the machine should proceed, rto status to State 5 or 4 bedroom.  However, if I used a "select" function where other State is determined by the Boolean value of a switch, how to set up my code that labview is not just assumne the current switch (probably a 'low' is the value of boolena to use.

  IM is probably not very clear, but hope that you understand my problem.

  Thanks in advance

  Hi, rivers,

  Simply add a case to handle the 2 buttons until the case of the action is over. You can use a ' wait on the UI"function if you do not want to interrogate the buttons. You may experience problems if you use the event structure to implement this. If you use more structure and then 1 event in your code, you can get a problem with UI suspended indefinitely. This happens if a key is managed by a structure of the event in another part of the loop. Locks user interface until he is executed, but it cannot be run because it is in another case. You must use only 1 structure of the event to handle all of your entries, but if you do that, then, you will have the problem to allow only certain buttons at certain points. For example, you want to only 2 & 3 active after action 1 action buttons and the buttons that are used to go to other disabled at this stage steps. It will be messy. Better just to add an extra case after every case of action that deals with the interaction of the user for the next case. In the example that I joined, I placed action buttons in a cluster that is passed to all cases allowing you to get the keys you need when you need it. You could of course just to put the buttons in cases where necessary, but I prefer the first method.

  RGS,

  Lucither.

• PowerCLI script for join ESXi hosts to Active Directory

  Is there a script that I can run to join the ESXi hosts Active Directory?  I have over 100 guests that I need to join AD and want to add it script instead of using the GUI VC.

  Thank you!

  Matt

  You can browse all of your servers, but you would need to make fully automated, is get the credentials somewhere.

  You have different passwords on all ESXi servers?

  In this case, you could do something like that

  $cred = get-Credential # prompt for user and password

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-Credential $cred

  If you do not have the same account/password for all servers ESXi, you want probably asked for each host.

  You could possibly temporarily store in a file and read this file.

  $accounts = @ {}

  Import-Csv "C:\accounts.csv" | %{

  $accounts [$_.hostname] = $_.password

  }

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-User root -Password $accounts[$_.Name]

  The CSV file contains 2 columns, called host name and the other called password.

  We read the CSV file and store the passwords in a hash table, where the host name is the key.

  We use the hash table to fetch the password of the Set-VMHostADDomain cmdlet tree.

• Dynamic stamps with the user input does not work in Acrobat DC

  After the update to Acrobat DC our dynamic personalized stamps no longer work. Pop ups to enter the data of the user are not more. When you open the PDF stamp if they work, but on the stamping stamp is affixed just without asking for user input via javascript.

  Any ideas on how to solve this problem? Is this a bug? Disabled Adobe functionality?

  K

  You should place as the custom calculation of one of the fields script and modify the code to check the stampName property.

  Search for information on dynamic PDF badges. There are many examples and code snippets out there in how to do it properly.

  There is even a whole book dedicated to this topic by Thom Parker.

• Order of execution for explicit file dialog boxes and query the user input dialogue

  Hello

  In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify?

  In fact, I just need the input of fo dialogue to prompt the user to be the first.

  Thanks for the tips!

  Martin

  Like most of the functions, the flow of execution can be set by plugging the error / mistake on clusters.

• We have a requirement of click to call in installing 10.5 UCCX with customer website (user input) for our customer

  Hello

  We have a requirement of click to call in installing 10.5 UCCX with customer website (user input) for our client, anyone who tested it in the laboratory/prod settings?

  Thank you!!
  Magali

  Hello magali.

  It is possible to deploy with UCCX HTTP trigger type. To get the number of customer via the HTTP trigger to the script. Then we can place the outgoing number of customer to campaign or appeal directly to the customer and place this call to the QSC.

  There are two scripts for web reminder in Cisco repository of scripts, see this http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/cont...

• How to: display a message while for loops, with no required user input

  Hi everyone, I'm relatively new to LabView, using 8.5.

  I want to display a message all in one for the loop runs, requiring no user input to delete the dialog box (that is to say, the box disappears after the end of the loop For).

  Any ideas?

  Thank you

  Darren

  
  

• Get errors for the user input data filter no KB 911895 HID

  OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
  What should I do to get rid of this popup that wizzard windows keeps giving me?

  Hi Graybeard,

  What is the exact error message you get?

  HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:

  The screen saver does not start after the installation of a wireless pointing device
  http://support.Microsoft.com/kb/913405

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• How to run a program as an administrator on a standard user account without be prompted for the password

  I have this software that doesn't work correctly than if you run it as administrator.  When you run it as administrator on the standard user account, it asks you the password.  How you turn off the prompt for password for that one software only? Or how you also run a software Administrator without being prompted to enter a password?

  Thanks for your help.

  Matt,

  Since you don't have a Vista Home Premium, I found another article that describes a way to get around it to make a registry change.

  The following Web site:
  http://www.eCoustics.com/PCW/HOWTO/140134

  Vista Home Premium is not the Group Policy Editor. To make the changes in this version, you must change the registry. Before making any changes to the registry, back it up following the instructions in "block Cookies for spying, but keep the most useful" (scroll down to the area of blue text at the bottom of the page).

  With your backup of the registry in place, click Start, type regedit and press ENTER. In the tree on the left pane, navigate to Microsoft\Windows\CurrentVersion\Policies\System HKEY_LOCAL_MACHINE. With the icon system selected in the left pane, double-click on ConsentPromptBehaviorAdmin in the right pane. Change the data value to 0, then click on OK. You should see the effect immediately (no restart required).

  Not sure if this will help, but thought that I have it send your way.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• User Account Control - prompt for elevation

  I'm trying to solve a problem with the touchpad of your laptop for a friend and decided to update the driver. However, when I try to run the installer, I am asked to view the security policy and select "Detect application installations and prompt elevation."

  I ran secpol.msc, and this policy is set to enabled.

  Machine is running Windows 7 ultimate (Service Pack 1).

  Until I return the machine with a resounding "sorry - can't sort! ', can someone suggest any control more quick that could be done to solve this problem?

  Thanks in advance!

  Hi Rob,
  Welcome to the Microsoft community. Sorry for the delay in responding. Are logged as administrator?

  Please take a look at this article and check if that helps.
  How can I change the behavior of user account control by using Group Policy?

  User account control: detect application installations and prompt for elevation

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.