PowerDVD has stopped playing blu - ray after Windows update

Similar Questions

• Stop unexpectedly (blue screen) after Windows Update

  I have problems with BlueScreen unexpected shut downs to 9.8.2015.  I keep trying to use the Action Center to find solutions, but it will not report (telling me there is a problem connecting to the Windows error reporting service).  Below is an example of the most recent error report order.  This problem is mainly after my computer goes to sleep or sleep, but sometimes while active.  The problem also seems to have started after only a few Windows updates that were installed this past fall 2015.  Your help is greatly appreciated!

  Signature of the problem

  Additional information about the problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  I would also update the driver associated with the driver support Dell Inc. PBA PBADRV.sys (yours is 2008) and if you continue to plant I would remove Symantec.

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• PowerDVD will not play Blu - ray

  Dell Studio XPS 8100. Drive Blu - ray. PowerDVD came with the system.

  Well, I just bought my first Blu - ray disc. And now it will not play. PowerDVD tells me to update the software. Then I do. I restart the software. PowerDVD still tells me to update the software. Then I do. I restart the software. PowerDVD still tells me to update the software. And yet again, I do.

  And then PowerDVD will not even run at all. It crashes. I can't get anything.

  No problem, I tell myself. I will contact all the customer support.

  JAL out of luck - unless I want to pay.

  Wait a minute. I paid for the software, when I bought the system. I'm waiting for the software to work.

  I have updated the firmware of the player and for my graphics card. I jumped through all the hoops. And yet, PowerDVD crashes before I can do something with it.

  So what am I supposed to do? Why won't work PowerDVD?

  I see that this is not an unusual problem with the software. However, I still have to find a solution. Can someone help me?

  The likely reason for Apple does not officially play Blu - ray support on its machines

  is that there is no way for a software playback Blu - ray should be installed and "just works.

  (Well, since all Macs since 2006 boot Camp support and XP/VISTA/WIN7 is not quite correct.  If you install windows, it works.)

  There is also no Apple Blue ray software, but he needs an active internet connection to play the media.

  A third party did a player of Blu - ray compatible Mac OS X, called Macgo.

  Options for Blu - ray authoring have come from Apple in the form of compressor in Final Cut Studio and the third Roxio Toast Titanium.

  Blu - ray burners that work with them include those sold by the calculation of the other world and MCETechnologies and both can replace the built-in DVD burner

  most Macs. AirX do Blu-ray playable on iPhone/iPad/iPod touch

  Player of Blu - Ray Mac buy, now only 39.95 $59,95 $

  Download Mac Bluray Player for Mac

  Download Blu - Ray to PC Player Mac

• PowerDVD has stopped playing the blurays

  I have powerdvd11 and in the past 2 weeks she does not play blu ray discs more.

  It is said not "able to play content protected on your digital output device. Enrure device to display compatible HDCP (code = 0110).

  My drivers are all to date as well as the software. CyberLink support seems to be no idea on how to solve this problem.

   

  Windows 7
  

  Cosre i7
  

  Graphics: AMD Radeon HD 7770
  

  Hello

   

  I just did the last update of windows (updates usual random registry) and he again plays the Blu rays.
  

   

  Thanks for all the help. I guess it was just a matter of windows.

  Kind regards
  

   

  Metallimeister
  

• BDP-S360 will not play blu ray set to update firmware but not go

  My Sony BDP S360 Bluray stopped playing discs Blu Ray, everyone else will play. I have updated a.007 with success, but still will not play blu ray. I always get invalid or no disc message. What to do next?

  Addendum to my previous post. The drive is locked during playback of a disc, and after that this point would not recognize a blu ray. Even after updating firmware.

• Windows blue screen after windows update FEB 10 2010 (stop: 0 x 00000050)

  After updating vista 32-bit with a major update and updates security 4-5 and 1 optional update, my system cannot load. I tried all the mods that are associated with the key f8 (as safe mod ect), then I tried to recover Vista disc, and then the repair system and still no-go. I've heard a chance to eliminate these additions with a command promp (for example using the Vista recovery disc) on an xp system. Unfortunately I have 32-bit vista, so the command prompt will be different slicely. My original Os cd can only perform format c: install and preserve old files or loading drivers (which I did not), so I downloaded and burned the vista recovery disk. I can't tell you my system specs because I can't make a dxdiag because I can't before the vista loading screen. From what I remember, I have a pentium quad core 2.4, 4 gig dual channel ram (I checked the memory diagnostics and is ok), gm-33 mother card, NVIDIA 250 gts grafic, power supply chieftec 550 w.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Blue screen after Windows updates

  Today, I got 12 updates to Windows update under Vista (security and others for internet explore). I use the 64-bit version and I get a blue screen and start each update even when I try individually. This is not the first time...

  No one knows why this happens?

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Blue screen after windows update

  I have Windows XP. I recently installed an automatic update and now my cpu stops after about 30 seconds to a minute after going to windows. It does not start in safe mode. What can I do in safe mode to fix this?

  1 click on the "Start" button, click on "Control Panel" and then double-click "Add/Remove Programs" icon

  2 click on the check box "Show updates" at the top of the window and wait for the list of the installed updates to appear.

  3 click the update that you want to delete, click on the "Delete" button, and then restart your computer. The update is now properly removed from your computer.

  UTC/GMT is 01:39 on Wednesday, February 22, 2012

• blue screen after windows update failed synaptics

  original title: bsod after updating windows failed synaptics

  Immediately after the installation of attempt and failure of an update of windows for synaptics ps/2 port touchpad ive had a bsod on logon. I don't know if the BSOD is associated with this update has failed. I think I might have some kind of malware. logon attempts sometimes take several tries to get it on the desk. im running a computer hp pavilion dv6700 laptop

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Why can't I play blu rays more?

  I have a laptop HP DX18 it came with a blu - ray player, but now it won't play blu ray in windows media center or media player... It says no update available. It just does not play a blu ray but still plays reg dvd any suggestions? He played my blu ray movies before, but stopped again. Happened about 2 years ago and hp technology gave me a show to download a new program that worked for 1 and a half years so far and bark I can't ask a technician hp because my time was missing for warenty. Can someone help? Please and thank you... Mike

  Hello

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs. You can search online by using your favorite search engine to get it.

  DISCLAIMER of THIRD PARTY SOFTWARE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• My blu - ray willn't play blu - ray player, but I can play regular DVDs how do I play them I paid a lot of money for this window7 with blu - ray for this reason

  can u help me to get the blu - ray to play

  He plays regular DVDs but not blu-rays and I paid for and it says on my hp blu - ray
  Windows7

  See if there are clues in these links.  Perhaps there is an update of the Firmware available for your DVD player?

  Resolution of the DVD and Blu - ray movie problems (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?CC=au&LC=en&DLC=en&docName=c01897830

  Have you tried this troubleshooting?

  Control Panel\All Control Panel Items\Troubleshooting\Hardware and sound

  Playing discs Blu ray on Windows 7

  http://forums.mydigitallife.info/threads/25240-playing-Blu-ray-discs-on-Windows-7

  http://www.Google.com.au/search?q=problem+playing+Blu+ray+DVD+Windows+7&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = 3XwtUZ36EYWkiAeQioG4CA

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• Can Pavilion dv6 (2010, Windows 7) play Blu - Ray discs? If so, how to operate?

  Hello!

  I have a computer laptop dv6 Pavilion 2010 (Windows 7), and I can't play Blu - Ray discs.

  In my control panel (Control Panel-> hardware) and sound-> Auto Play, it lists "Blu - Ray Disc movie" as one of the media types, I can choose a value for default, but the only options it gives me are: "Open folder to view files using Windows Explorer", "Take no action" and "Ask Me every time."  So, I can not select a program to use to read discs Blu - Ray here.

  I tried to put in a Blu - Ray disc and see if it will open with Windows Media Player, iTunes, and HP MediaSmart, but none of these programs recognize there is a disc in the drive.

  When I insert the disc, the computer seems to recognize that I put something in, but when I check "Devices with removable storage" in the folder "My Computer", it is said that there is no disc in the drive.

  Then... I have two questions.
  (1) can my computer even Blu - Ray discs play?

  (2) if it is able to do, why my computer doesn't recognize Blu - Ray discs I put in?

  I don't really know what I would do to this subject, so if someone saw that they are willing to give, I would really appreciate it!

  Thank you!!

  Hello

  The optical drive of your laptop is not able to read Blu ray discs - there are replacement blu ray capable drives available for your laptop that can be seen (including the alternative procedure) on Page 70 of your & Maintenance Guide.

  Kind regards

  DP - K