PowerEdge 2950 drive cannot be used offline.

Similar Questions

• Why this flash drive cannot be used for loan boost in windows 7?

  I have a flash drive 8 GB Kingston which is useless, but functional. I decided to use it to boost lending. So, when I go to ready boost in windows 7, it says this drive cannot be used as ready boost I've tried several times but the same answer. When I try to use it as ready boost preview of consumer windows it says OK. I have set up as ready boost. I also format and then try but same answer in windows 7. How can I use this disk as ready boost in windows 7?

  Sometimes the reader is not fast enough for Readyboost. BTW: How much memory you have in your PC? You can even no need for ReadyBoost.

  But, to force Windows to use ReadyBoost (even with a slow flash drive): http://www.mstechpages.com/2010/10/12/force-readyboost-on-a-usb-device/

• Stor.e TV - last 23% space HARD drive cannot be used

  Hello

  I bought a multimedia hard drive 1.5 TB Stor.e TV.

  I recorded 1.4 TB VOB files and some files are ilegibles (the last copied files).

  After deleting some files, leaving the 23% of free space and compress the disk, reads all the files that remain, even files that before, could not be read.

  The problem is that there are 23% of disk space that can be used.

  A friend who has the same drive has the same problem.

  Greetings

  Hello

  I could imagine that not all the files have been copied properly to the TV Stor.e because of the missing space and this could be the reason why you were not able to play the latest bearable files.

• HP hp Server ml310e gen8 v2 install with Server 2008 4 t hard drive can be used completely

  Know one on hp hp Server ml310e gen8 v2 install with Server 2008 and why 4 t hard drive cannot be used entirely to the server? How can I change the settings of the Bios MBR TPG mode?

  This would be better served if posted in the Forum of Support Business company instead of the global consumer support forum.

  http://h30499.www3.HP.com/

• Cannot add ESX/PowerEdge 2950 hard drive

  Hello..  I have a Dell PowerEdge 2950 with a Perc6 / i.  I am currently under VMWare ESX 3.5i using RAID 5.  I added another drive and try to add that, for VMWare.  Looking at the sensors, the UNCONFIGURED GOOD watch drive.  When I try to add through VIC using storage - & gt; Add storage, the disk is not there.  I looked everywhere to try to add this drive but its got the best of me.  What I am doing wrong?

  Ideally, I would like to add to the RAID 5 array, but from what I've read is not possible.  Suffice to just be able to add the period dang by car.

  Help!

  -st

  The boot server and press Ctrl + R and go to group configuration, look at the table manager and add the new virtual disk. Don't try to split the table 5 in place or you may lose your data.

  Bandolero

• Replace a HARD drive in RAID 1 PowerEdge 2950, question on the process

  Having never had to replace a HARD drive in a RAID 1 configuration on a PowerEdge 2950 Server (PERC 5 / i).

  Can I do put in custody or from a cold start?

  I replaced the HDD failure with the new HARD drive with the same part number.

  This is my boot volume, so I don't want to spoil...

  THX

  If the data is critical, and you don't have a backup, get one now.

  NEVER stop a server to introduce a disk. If the reader poster pred fail, force the drive offline first, then remove it. If it is already broken, then just pull it off.

• PowerEdge 2950 HARD drive failure

  Hello

  Sorry for the newbie question, but I have the following scenario (where I have no experience dealing with the old servers)

  We have a set of old servers (DELL PowerEdge 2950) that migrate again (IBM X Flex), one of the old server is MOSS 2007 with 2 HDD, suddenly primary HDD is dead and in menu missing with setup. I removed old server on another HARD drive and mounted on the MOSS 2007 server and initialized. the question is how do I replace the HARD drive died with a new one and copy another disk configurations HARD live

  Please if you need more information just ask in answers because am new on this servers with 0% experience

  Thank you

  ---------------UPDATE-------------

  the current RAID is RAID 0 and I found that a backup windows (from previous system admin) file so it is possible to format the two HDD, configure RAID for RAID 1, install windows, and then restore the backup?

  also, I was reading this article " " but I couldn't change the RAID, so any suggestion?

  You need drivers ("hard drive" version, run to extract before use):

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=GHNKT&FILEID=3000719989&osCode=WNET&ProductCode=PowerEdge-2950&LanguageCode=en&CategoryID=SF

• Secure Hard Drive wipe for Poweredge 2950

  Hello, I recently got a hold of a Dell Poweredge 2950 but until I can do something with it. I need to clear safe hard drives with killdisk (or something similar that will provide newspapers) and I have problems with what I believe, it is the raid controller. I followed these instructions

  http://sysadmin-e.com/securely-wiping-hard-disk-drives-on-Dell-PowerEdge-servers-with-BartPE-and-kill-disk

  and came very close, but it did not work. I have when I get on the use of killdisk for windows, I am able to see the virtual drives all named with the perc 5 / i but later I receive errors when trying to erase the drives. I'm starting to think that it is not possible at this point, the Active Server, but I wanted to see if anyone had experience with this or advice and assistance. Thank you.

  Why do you need to erase the discs on the receiving server safe?  It is usually the responsibility (desire and political) of an organization, before getting rid of a system/disk.

  Are these SAS or SATA drives?  You could attach them to a JBOD controller (PERC 5 support NOT of JBOD/no RAID), and then do the wipe directly to disk without the need to manage virtual disks on the controller.

• PowerEdge 2950 - order replacement HARD drive

  We recently replaced among 300 GB three SAS hard drives in a PowerEdge 2950, after seeing 1810 Code error 1 HARD disk fault.  We would like to order replacement disks to have on hand, but must be sure that we order is fully compatible.  The reader, we have removed is Seagate ST3300656SS with Firmware HS09 and certified as a disk HARD of Dell Enterprose class.  I understand that just order a Seagate drive of the same model number is not enough.  How can we be sure we are ordering the right items?

  finbarrd

  How can we be sure we are ordering the right items?

  Make sure that the disc is "certified" (Dell co-branded with a Dell Reference number):
  http://www.Amazon.com/Seagate-ST3300656SS-Dell-Cheetah-LABELED-ST3300656SSDELL/DP/B003FO8POG

• I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database of your application]

  I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database that your application recognizes, or the file may be corrupt,.] Everything worked very well this fault has just come. Anyone know how to solve this problem.

  Settle into the Photoshop Elements forum.

• PowerEdge 2950 III w / Server2008 64 bit: cannot activate TOE

  I recently purchased a PowerEdge 2950 III with standard options, which includes a double NetXtreme II Broadcom nic with TOE capabilities. Due to some communication problems, it was delivered without active TOE and the TOE installed key. I installed Windows Server 2008 64 bit on it.

  After some time Dell send me a TOE key, and I off the server and installed it.

  In the BIOS, it now says "able TOE." In the Dell OpenManage Server Administrator it said ' able TOE: available 'and' enable TOE: 'Yes. But in the Broadcom Control Suite to unload his abilities he doesn't list that the LSO and CO, PINCH.

  I have tried several things:

  -J' ran "netsh interface tcp > set global chimney = on" to activate TOE

  -disabled the Windows Firewall

  -remove the Broadcom drivers and reinstall them (the more recent on the Dell site)

  -installed the SNMP functionality

  But I can't seem to make it work.

  TOE benefits to the whole Server 2008? If so, what am I doing wrong?

  
  

• PowerEdge 2950: Disco con Volume Raid 5 [MS] offline

  Su winds del supporto tecnico vi sewn by take UN preventivo per sostituzione di UN difettoso disco.

  VI allégo i dati del disco del e Server

  Dati server:

  Chassis model PowerEdge 2950

  Revision III system

  Service of chassis number

  Dati dell open manage server administrator:

  Critical; Physical disk 0:0:0; Failed

  type: SAS

  136,12 GB capacity

  vedor DELL

  ProductID ST3146356SS

  revision HS09

  serial number 3QN091J5

  day 03. 41; 2008

  SAS address 5000C50004EDD38D

  Buongiorno,

  Offerta inviata: Offerta Dell n ° client 15509878: IT2786257 - TECNEMA TECHNOLOGY SRL

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) senza retreat del guasto *.

  Speaking saluti

  Manual

• PowerEdge 2950 HARD 500 GB SAS [MS] drive

  Abbiamo UN PowerEdge 2950

  Codice di matricola: |
  Codice di servizio rapido:

  Per questo Server above serve disco UN auswechseln: Seagate 500 Gb SAS 7.2 Potete fornirlo

  Potete inviarmi offerta al mio address e-mail:

  [email protected]

  Reference Dell SPA pulito gia' registrata come nostro fornitore

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione:
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• DELL PowerEdge 2950 PERC 5 / i

  Dear members,

  I have server Dell PowerEdge 2950, I need to install Windows 2003 Standard Edition and save it as a file server for my network.

  So I bought 2 TB SATA WD HDD, I would like to create RAID 1.

  As a trial, I connected two 145 GB SAS and a 2 TB SATA Bay and switch ON create RAID1.

  Please guide me how to create RAID 1 using PERC 5 / i utility of configuration?

  My version 5 PERC / i integrated 5.0.2.0003.

  Thank you

  Tony

  You cannot mix SAS and SATA drives in a RAID array.

• Dell PowerEdge 2950 P2V problem

  Physical server:

  Dell PowerEdge 2950

  Windows 2003 R2 Standard x 86 operating system

  Sheet music:

  Dell - hidden partition

  C: BONE

  D: Data1

  E: Data2

  F: Data3

  G: data4

  vSphere ESXi 4.1 (under license)

  ISCSI SAN

  vCenter Server

  I tried on cold hidden server with boot CD, but received the error "unable to determine the operating system invited."  Looks like that I don't have the driver for the Dell raid controller in the boot CD.

  I decided to go with the hot P2V using the plug-in for VirtualCenter.  I stop the SQL server service and disabled the firewall disabled the anti-virus tools.  Only two partitions (C and G) on the physical server must be in the new virtual machine.  So, I've selected partitions C and G and has increased the size of the drive at a time.  I made sure not to install the vmware tools and unchecked the option reconfigures.   The P2V conversion was successful.   But when I went to start the virtual machine, it starts with the 'VMWARE' logo and restarts immediately.  Restart the virtual computer so fast I can't even in the BIOS unless I hit the key several times.   I did the clonning with the hidden partition, but with the same problem.   There are no BSOD or any indication that the virtual machine cannot find the vdisks.   Called in vmware support.  They used webex for an hour, but could not fix.  Asked me to send in the logbundle.

  I HERE it if someone tell me what I am doing wrong?

  Thank you

  Another option is to install the Standalone Converter 3.0.3 on the PowerEdge, stop all services and performing the conversion.

  André