Cannot add ESX/PowerEdge 2950 hard drive

Similar Questions

• PowerEdge 2950 HARD drive failure

  Hello

  Sorry for the newbie question, but I have the following scenario (where I have no experience dealing with the old servers)

  We have a set of old servers (DELL PowerEdge 2950) that migrate again (IBM X Flex), one of the old server is MOSS 2007 with 2 HDD, suddenly primary HDD is dead and in menu missing with setup. I removed old server on another HARD drive and mounted on the MOSS 2007 server and initialized. the question is how do I replace the HARD drive died with a new one and copy another disk configurations HARD live

  Please if you need more information just ask in answers because am new on this servers with 0% experience

  Thank you

  ---------------UPDATE-------------

  the current RAID is RAID 0 and I found that a backup windows (from previous system admin) file so it is possible to format the two HDD, configure RAID for RAID 1, install windows, and then restore the backup?

  also, I was reading this article " " but I couldn't change the RAID, so any suggestion?

  You need drivers ("hard drive" version, run to extract before use):

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=GHNKT&FILEID=3000719989&osCode=WNET&ProductCode=PowerEdge-2950&LanguageCode=en&CategoryID=SF

• Cannot add Ubuntu host physical hard drive to Windows 7 comments

  When I try to add a physical hard disk to a Windows 7 client on an Ubuntu host, I get the error: "insufficient permission to access file. This occurs if the drive is mounted on Ubuntu or not. In Ubuntu, permissions on records House / < username > / vmware and/dev/sdc have rwx was set by "chmod-r 777 vmware."

  Steps to follow:

  -Launch the Virtual Machine settings
  -Add the hard drive; Use a physical disk
  -Device is/dev/sdc (connected by eSata to the host of Ubuntu)
  -Use: Use the entire disk
  -Name of the disk file: Windows7x64 - 0.vmdk
  -"Finish" produces the error message. Steps to follow:

  The hard drive is connected via eSATA. The error message occurs if the disk is mounted or not in Ubuntu. It also occurs if I try to add a partition, but the folder is/dev/sdc.

  Ubuntu 9.10 64-bit, Windows 7 Ultimate 64 - bit comments host.

  It's probably something obvious to a Linux expert...

  This is expected behavior

  Run WS as root - or try to add your user account to the Group of disks-

• Available to add the second internal hard drive to 17-e117dx

  Hello

  Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

  If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

  HP Pavilion

  Product: F9J38UA #ABA

  Model: 17-e117dx

  Thank you

  Not in the way you probably do. Here is the Service Manual:

  Manual

  See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

  https://www.jacobsparts.com/items/HDDBAY-02/

  If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178006

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY laptop laptop 15-as032nr: buy 512 GB SSD laptop. You want to add additional 1 to hard drive. Can it be done?

  Hello

  I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?

  Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:

  Repair manuals

  It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:

  The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857797-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857806-001

  An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.

  This isn't a simple upgrade; If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PowerEdge 2950 HARD 500 GB SAS [MS] drive

  Abbiamo UN PowerEdge 2950

  Codice di matricola: |
  Codice di servizio rapido:

  Per questo Server above serve disco UN auswechseln: Seagate 500 Gb SAS 7.2 Potete fornirlo

  Potete inviarmi offerta al mio address e-mail:

  [email protected]

  Reference Dell SPA pulito gia' registrata come nostro fornitore

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione:
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Re: How can I add a second internal hard drive to a Satellite Pro P200?

  I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector.

  I contacted Toshiba Dutch customer service who said that it was official policy not to provide any information on a second internal drive. They also said that they would not provide parts to make it possible.

  Can anyone provide more information?

  Hello!

  I think that if there is no connector you cannot add a second HDD.
  It of Nice to have a second Bay, but it's nothing without a connector.

  Good bye

• Pavilion a6500f: can I add a second SATA hard drive to my HP Pavilion a6500f?

  I have a HP Pavilion a6500f running Windows 7 Home Premium.  I would like to add a second hard drive to 500 GB 7200 RPM to it as a slave drive.  Can I do this?  And if I can how do I know what size must have the hard drive?

  That your system is 8 years old, I suggest you these:

  (1) clone the old drive to a new drive, either 500 GB or 1 TB.  Use it as your new drive system.  Modern Sata 600 drives are 6 Gbps with 64 MB of cache memory. It will have better performance than older Sata 300 players with 32 MB cache / 3 GB/s.

  (2) your old-school, like the reader of the term 'slave' was a reference to the IDE/EIDE, cabling system.

  (3) all you need is a standard WD or Seagate 7200 RPM disk 3,5 '' hard. Both offer a free disk assistant program to facilitate the process of cloning.

• S50 satellite - B - 15 p - it is possible to add addional SSD or HARD drive?

  Hello

  I recently bought a laptop Satellite S50 - B - 15 p.
  I'm very happy with it

  My question is about its SSD drive
  It is now 128 GB.

  It is possible to add addional SSD or HDD.

  Or replace the current by the new with a higher capacity.

  My best regards

  I don't have this model of laptop, but according to some pictures I found isn't Googling around this model of laptop SSD? HARD drive covers in the lower corner, therefore, as a general rule, these updates is not supported and should not be done by the owner of the laptop.
  If you want to have full access to the SSD, you must remove the lower cover and it can be done by authorized personnel only. If you try to do it yourself you will void the warranty.

  In my opinion, you should contact the nearest Toshiba service provider and ask for help or, at least, good advice what to do about it.

• Satellite L735 - cannot start the backup of HARD drive

  Hello

  I want to buy a new HDD in my laptop a L735. Before doing this, but I need to back up the windows installation files. Whenever I try to do a backup, but it does not allow me and a message appears on the screen saying that it is not possible. Here's a screenshot of it:

  http://img694.imageshack.us/img694/7088/screennv.PNG

  Could someone help me with this please?

  Kind regards
  Darren

  >... I need to back up the windows installation files
  What you try to do is not the Windows installation files back up but the creation of recovery disks.
  For some reason of original Toshiba recovery image cannot be found or detected on the HARD drive. I don t know what that you did, but it can happen if hidden recovery partition is deleted or partition structure has been changed.

  Do you have more questions?

• Satellite L40 cannot start or recognize the hard drive

  Hi all

  I bought a new Satellite L40 without windows or CD come with him,
  so now when I put the Xp CD, the drive cannot recognized the hard drive or a CD-Rom.

  error message
  Reboot and select boot device prober, or insert boot media in selected boot device and press a KEY.

  I'm not saying any key LOL
  It suppose to be all LOL key to

  Please your help in this matter

  Here another thread about the installation of the SATA drivers!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must include the * Intel Matrix Storage Manager * during the XP installation process.
  As far as I know you have to press the F6 key to include the external USB FDD drive driver.
  Once you have included the SATA driver * DON T format the drive HARD * or create all partitions because that would erase the included driver!

  Another possibility to include the SATA drivers is the use of the * software to nLite.
  By using this software, you could include the SATA driver in the new created XP CD.
  And then you could boot from the new CD.

  > no initialization of SPARCFichiers of hard disk
  > can not load hard drive
  > Insert systemdisk and press a key

  This error message appears because you didn't boot from the bootable CD and/or the operating system has not been installed on the HARD drive and the laptop I wanted to boot from the HARD drive.

• Cannot take possession of the hard drive Partition

  I have a partition on my hard drive to store media. OS is XP home SP3. For some reason, I didn't have full access to certain folders on the partition so I tried to change the permissions for the entire score. I don't remember exactly what I did, but the main thing is that I have more access to the root of the partition. (I can always access all files using the file Explorer). I tried to appropriate the partition via the safe mode and the administrator account, but it won't allow me to take this way. I also tried to merge with the c drive partition using partition magic, but I had an error half way through the process. I suppose that the permissions would not happen. I read on the internet that "you can always take ownership' and I wonder what I'm doing wrong.

  Can someone help me?

  Manually apply permissions to a file or folder, follow these steps. Manually apply permissions, it's something that only advanced users should do because you could end up with unexpected results.

  1. right click on the file or folder and then clickProperties.

  2. click on the tab Security and then clickchange.

  3. If you want to set permissions for a user who is not listed undergroup or user names, click Add, type everyone in the name of the user or group, clickOK, select permissions and then click OK.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  You can also check out the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  See the answer of Alex B-

  http://www.Vistax64.com/Vista-General/118340-folder-access-denied-unable-display-current-owner.html

• Cannot access files on external hard drive connected to Windows XP to Windows 7

  Original title: to access the shared files on an external drive using Win7

  I have created a shared folder on an external drive attached to my WinXP Home addition.  When I try to accIess to the shared folder on Win7 I see the folder but cannot access the files.  Yet when I create a shared folder on my XP I correctly read files.  Why can't access the shared folder on my external hard drive on my network

  Hello

  Do you get any error messages?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  In addition, we can see:

  Windows 7 & HomeGroup: share with other Windows XP and Windows Vista operating systems

  
  

  http://www.Microsoft.com/download/en/details.aspx?ID=17168

  Hope this helps and keep us informed if you need help.

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Add RAM or external hard drive?

  My mac was super slow for a bit now.  I used EtreCheck and remove what was suggested in the report, I have read that I have 4 "memory slots" available, but I'm only using 2 in order to buy more RAM and install it.  Should I seek to increase the RAM of the computer or I should buy an external hard drive, move the photos there and remove them from iPhoto?

  I have a million pictures in iPhoto... This is one of my passions, but I certainly have a lot more then average.  Here are a few other possibly useful info on my computer (not that I understand):

  Processor: 1 Intel Core 3.2 GHz (2 cores)

  (By heart) L2 cache: 256KB

  L3 Cache: 4MB

  Memory: 4 GB

  Processor speed of interconnection: 5.86 GT/s

  Model identifier: iMac11, 2

  Processor name: Intel Core i3

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 4 MB

  Memory: 4 GB

  Speed of the processor interconnection: 5.

  You did not post the result of your EtreCheck in one of the other threads you've started.

  Please post that your report results here, so that we can see if your HARD disk is full or if you need to update the RAM.

  http://etrecheck.com/